Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=20925): Process ended prematurely: osmo-stp_10.42.42.5(pid=20925) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20925)]
Standard Output
---------------------------------------------- trial-2357 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 09:36:01.153240 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.171319 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 09:36:01.362338 tst iperf3m4.py: using LAC 20557 09:36:01.528432 tst iperf3m4.py: using RAC 157 09:36:01.678348 tst iperf3m4.py: using CellId 20557 09:36:01.808419 tst iperf3m4.py: using BVCI 20558 09:36:01.834163 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.847484 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.860509 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.874863 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.888251 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.901250 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.914553 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.926990 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 09:36:01.940592 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:36:02.091612 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:36:02.239680 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:36:02.367155 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 09:36:02.647839 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 09:36:02.774383 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:36:03.087268 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20911): Launched 09:36:03.347240 run iperf3-srv_10.42.42.10(pid=20912): Launched 09:36:03.532412 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 09:36:03.658583 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:36:03.971967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20913): Launched 09:36:04.231863 run iperf3-srv_10.42.42.10(pid=20914): Launched 09:36:04.416465 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 09:36:04.542664 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:36:04.855757 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20915): Launched 09:36:05.116088 run iperf3-srv_10.42.42.10(pid=20916): Launched 09:36:05.301352 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 09:36:05.428484 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:36:05.741697 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20917): Launched 09:36:06.002153 run iperf3-srv_10.42.42.10(pid=20918): Launched 09:36:06.186779 tst iperf3m4.py:8: start network... 09:36:06.313070 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:36:06.796885 run create_hlr_db(pid=20919): Launched 09:36:06.969812 bus /gobi_6: Setting Powered False 09:36:07.991197 run create_hlr_db(pid=20919): Terminated: ok {rc=0} 09:36:08.420456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20921): Launched 09:36:08.745325 run osmo-hlr_10.42.42.2(pid=20922): Launched 09:36:08.865287 run osmo-stp_10.42.42.5: Starting osmo-stp 09:36:09.430821 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20924): Launched 09:36:09.756676 run osmo-stp_10.42.42.5(pid=20925): Launched 09:36:09.875941 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:36:10.443490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20927): Launched 09:36:10.559171 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:36:10.841368 run patchelf(pid=20928): Launched 09:36:11.030141 run osmo-stp_10.42.42.5(pid=20925): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20925)] 09:36:11.168470 run osmo-stp_10.42.42.5(pid=20925): stdout: | (launched: 2022-12-09_09:36:09.596933) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:36:11.307129 run osmo-stp_10.42.42.5(pid=20925): stderr: | �[0;m�[38;5;43m20221209093609788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209093609789 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209093609789 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209093609789 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209093609790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209093609790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209093609790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:36:11.441611 run osmo-stp_10.42.42.5(pid=20925): stdout: | (launched: 2022-12-09_09:36:09.596933) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:36:11.575034 run osmo-stp_10.42.42.5(pid=20925): stderr: | �[0;m�[38;5;43m20221209093609788 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209093609789 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209093609789 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209093609789 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209093609790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209093609790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209093609790 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:36:11.729614 run patchelf(pid=20928): Terminating (SIGINT) 09:36:11.910828 run patchelf(pid=20928): Terminated: ok {rc=0} 09:36:11.944082 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=20925): Process ended prematurely: osmo-stp_10.42.42.5(pid=20925) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20925)] [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 09:36:11.954011 tst iperf3m4.py:8: Test FAILED (10.9 sec) 09:36:12.017867 run osmo-hlr_10.42.42.2(pid=20922): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=20922)] 09:36:12.069381 run osmo-hlr_10.42.42.2(pid=20922): stdout: | (launched: 2022-12-09_09:36:08.585762) 09:36:12.121786 run osmo-hlr_10.42.42.2(pid=20922): stderr: | �[0;m�[1;31m20221209093608785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209093608785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209093608785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209093608785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209093608785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209093608785 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209093608797 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209093608806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209093608806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209093608806 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:36:12.166055 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20911): Terminating (SIGTERM) 09:36:12.208399 run iperf3-srv_10.42.42.10(pid=20912): Terminating (SIGTERM) 09:36:12.250030 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20913): Terminating (SIGTERM) 09:36:12.292038 run iperf3-srv_10.42.42.10(pid=20914): Terminating (SIGTERM) 09:36:12.334950 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20915): Terminating (SIGTERM) 09:36:12.377164 run iperf3-srv_10.42.42.10(pid=20916): Terminating (SIGTERM) 09:36:12.418940 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20917): Terminating (SIGTERM) 09:36:12.461073 run iperf3-srv_10.42.42.10(pid=20918): Terminating (SIGTERM) 09:36:12.503308 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20921): Terminating (SIGTERM) 09:36:12.545154 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20924): Terminating (SIGTERM) 09:36:12.587169 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20927): Terminating (SIGTERM) 09:36:12.597138 --- ParallelTerminationStrategy: PID 20911 died... 09:36:12.653373 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20911): Terminated: ok {rc=0} 09:36:12.663841 --- ParallelTerminationStrategy: PID 20912 died... 09:36:12.719649 run iperf3-srv_10.42.42.10(pid=20912): Terminated {rc=256} 09:36:12.729839 --- ParallelTerminationStrategy: PID 20913 died... 09:36:12.786058 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20913): Terminated: ok {rc=0} 09:36:12.796051 --- ParallelTerminationStrategy: PID 20914 died... 09:36:12.851674 run iperf3-srv_10.42.42.10(pid=20914): Terminated {rc=256} 09:36:12.861946 --- ParallelTerminationStrategy: PID 20915 died... 09:36:12.917222 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20915): Terminated: ok {rc=0} 09:36:12.927317 --- ParallelTerminationStrategy: PID 20916 died... 09:36:12.982825 run iperf3-srv_10.42.42.10(pid=20916): Terminated {rc=256} 09:36:12.992652 --- ParallelTerminationStrategy: PID 20917 died... 09:36:13.047900 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=20917): Terminated: ok {rc=0} 09:36:13.058522 --- ParallelTerminationStrategy: PID 20918 died... 09:36:13.114223 run iperf3-srv_10.42.42.10(pid=20918): Terminated {rc=256} 09:36:13.124093 --- ParallelTerminationStrategy: PID 20921 died... 09:36:13.179385 run pcap-recorder_any(filters='host 10.42.42.2')(pid=20921): Terminated: ok {rc=0} 09:36:13.189897 --- ParallelTerminationStrategy: PID 20924 died... 09:36:13.245140 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=20924): Terminated: ok {rc=0} 09:36:13.255301 --- ParallelTerminationStrategy: PID 20927 died... 09:36:13.310934 run pcap-recorder_any(filters='host 10.42.42.6')(pid=20927): Terminated: ok {rc=0} 09:36:13.397839 bus /gobi_4: Setting Powered False 09:36:14.501832 bus /gobi_4: Setting Powered False 09:36:15.609323 bus /gobi_1: Setting Powered False 09:36:16.721050 bus /gobi_1: Setting Powered False 09:36:17.829506 bus /gobi_0: Setting Powered False 09:36:18.931669 bus /gobi_0: Setting Powered False 09:36:20.042876 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=20925): Process ended prematurely: osmo-stp_10.42.42.5(pid=20925) [trial-2357↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=20925)]