Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13749): Process ended prematurely: osmo-stp_10.42.42.5(pid=13749) [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13749)]
Standard Output
---------------------------------------------- trial-2357 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 08:32:26.247577 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:32:26.259494 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:32:26.407889 tst ping_idle_ping.py: using LAC 20220 08:32:26.534134 tst ping_idle_ping.py: using RAC 75 08:32:26.653044 tst ping_idle_ping.py: using CellId 20220 08:32:26.771774 tst ping_idle_ping.py: using BVCI 20221 08:32:26.795391 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:32:26.806826 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:32:26.818046 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:32:26.829451 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:32:26.840560 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:32:26.851770 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:32:26.863269 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:32:26.874825 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:32:27.173452 tst ping_idle_ping.py:24: start network... 08:32:27.311208 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:32:27.833686 run create_hlr_db(pid=13743): Launched 08:32:28.024062 bus /gobi_6: Setting Powered False 08:32:29.032348 run create_hlr_db(pid=13743): Terminated: ok {rc=0} 08:32:29.479338 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13745): Launched 08:32:29.811025 run osmo-hlr_10.42.42.2(pid=13746): Launched 08:32:29.931265 run osmo-stp_10.42.42.5: Starting osmo-stp 08:32:30.502468 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13748): Launched 08:32:30.844033 run osmo-stp_10.42.42.5(pid=13749): Launched 08:32:31.043760 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:32:31.664222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13751): Launched 08:32:31.779338 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:32:32.068633 run patchelf(pid=13752): Launched 08:32:32.255326 run osmo-stp_10.42.42.5(pid=13749): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13749)] 08:32:32.396328 run osmo-stp_10.42.42.5(pid=13749): stdout: | (launched: 2022-12-09_08:32:30.670246) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:32:32.537447 run osmo-stp_10.42.42.5(pid=13749): stderr: | �[0;m�[38;5;43m20221209083230883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083230883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083230883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083230884 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083230884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083230884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083230884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:32:32.673340 run osmo-stp_10.42.42.5(pid=13749): stdout: | (launched: 2022-12-09_08:32:30.670246) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:32:32.808463 run osmo-stp_10.42.42.5(pid=13749): stderr: | �[0;m�[38;5;43m20221209083230883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083230883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083230883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083230884 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083230884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083230884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083230884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:32:32.965095 run patchelf(pid=13752): Terminating (SIGINT) 08:32:33.149594 run patchelf(pid=13752): Terminated: ok {rc=0} 08:32:33.183317 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=13749): Process ended prematurely: osmo-stp_10.42.42.5(pid=13749) [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13749)] [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 08:32:33.192575 tst ping_idle_ping.py:27: Test FAILED (6.9 sec) 08:32:33.257512 run osmo-hlr_10.42.42.2(pid=13746): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13746)] 08:32:33.310028 run osmo-hlr_10.42.42.2(pid=13746): stdout: | (launched: 2022-12-09_08:32:29.646744) 08:32:33.363378 run osmo-hlr_10.42.42.2(pid=13746): stderr: | �[0;m�[1;31m20221209083229846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209083229846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209083229846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209083229846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209083229846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209083229846 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209083229858 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209083229866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209083229866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209083229866 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:32:33.408152 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13745): Terminating (SIGTERM) 08:32:33.451165 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13748): Terminating (SIGTERM) 08:32:33.494914 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13751): Terminating (SIGTERM) 08:32:33.505250 --- ParallelTerminationStrategy: PID 13745 died... 08:32:33.562552 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13745): Terminated: ok {rc=0} 08:32:33.573459 --- ParallelTerminationStrategy: PID 13748 died... 08:32:33.630594 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13748): Terminated: ok {rc=0} 08:32:33.641004 --- ParallelTerminationStrategy: PID 13751 died... 08:32:33.698169 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13751): Terminated: ok {rc=0} 08:32:33.786944 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13749): Process ended prematurely: osmo-stp_10.42.42.5(pid=13749) [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13749)]