Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13560): Process ended prematurely: osmo-stp_10.42.42.5(pid=13560) [trial-2357↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13560)]
Standard Output
---------------------------------------------- trial-2357 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 08:29:34.353474 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:34.364405 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 08:29:34.499416 tst cs_paging_gprs_active.py: using LAC 20206 08:29:34.629408 tst cs_paging_gprs_active.py: using RAC 61 08:29:34.761622 tst cs_paging_gprs_active.py: using CellId 20206 08:29:34.893289 tst cs_paging_gprs_active.py: using BVCI 20207 08:29:34.919096 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:34.930704 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:34.941998 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:34.953524 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:34.964926 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:34.976507 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:34.988180 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:34.999814 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 08:29:35.011719 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:29:35.132012 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 08:29:35.418130 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:29:35.547647 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:29:35.868521 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13550): Launched 08:29:36.134592 run iperf3-srv_10.42.42.10(pid=13551): Launched 08:29:36.323359 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:29:36.452279 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:29:36.773176 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13552): Launched 08:29:37.038694 run iperf3-srv_10.42.42.10(pid=13553): Launched 08:29:37.227011 tst cs_paging_gprs_active.py:38: start network... 08:29:37.355727 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:29:37.852639 run create_hlr_db(pid=13554): Launched 08:29:38.030616 bus /gobi_6: Setting Powered False 08:29:39.053567 run create_hlr_db(pid=13554): Terminated: ok {rc=0} 08:29:39.494349 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13556): Launched 08:29:39.826698 run osmo-hlr_10.42.42.2(pid=13557): Launched 08:29:39.948386 run osmo-stp_10.42.42.5: Starting osmo-stp 08:29:40.524604 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13559): Launched 08:29:40.856433 run osmo-stp_10.42.42.5(pid=13560): Launched 08:29:40.976921 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:29:41.554207 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13562): Launched 08:29:41.673083 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:29:41.962579 run patchelf(pid=13563): Launched 08:29:42.155620 run osmo-stp_10.42.42.5(pid=13560): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13560)] 08:29:42.296732 run osmo-stp_10.42.42.5(pid=13560): stdout: | (launched: 2022-12-09_08:29:40.694026) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:29:42.439046 run osmo-stp_10.42.42.5(pid=13560): stderr: | �[0;m�[38;5;43m20221209082940883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209082940883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209082940883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209082940884 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209082940884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209082940884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209082940884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:29:42.576607 run osmo-stp_10.42.42.5(pid=13560): stdout: | (launched: 2022-12-09_08:29:40.694026) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:29:42.712554 run osmo-stp_10.42.42.5(pid=13560): stderr: | �[0;m�[38;5;43m20221209082940883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209082940883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209082940883 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209082940884 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209082940884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209082940884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209082940884 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:29:42.870468 run patchelf(pid=13563): Terminating (SIGINT) 08:29:43.055544 run patchelf(pid=13563): Terminated: ok {rc=0} 08:29:43.089512 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13560): Process ended prematurely: osmo-stp_10.42.42.5(pid=13560) [trial-2357↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13560)] [trial-2357↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 08:29:43.099573 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 08:29:43.163805 run osmo-hlr_10.42.42.2(pid=13557): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13557)] 08:29:43.215870 run osmo-hlr_10.42.42.2(pid=13557): stdout: | (launched: 2022-12-09_08:29:39.664047) 08:29:43.269081 run osmo-hlr_10.42.42.2(pid=13557): stderr: | �[0;m�[1;31m20221209082939861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209082939861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209082939861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209082939861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209082939861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209082939861 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209082939873 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209082939882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209082939882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209082939882 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:29:43.314409 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13550): Terminating (SIGTERM) 08:29:43.356544 run iperf3-srv_10.42.42.10(pid=13551): Terminating (SIGTERM) 08:29:43.399819 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13552): Terminating (SIGTERM) 08:29:43.442080 run iperf3-srv_10.42.42.10(pid=13553): Terminating (SIGTERM) 08:29:43.484620 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13556): Terminating (SIGTERM) 08:29:43.527032 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13559): Terminating (SIGTERM) 08:29:43.569864 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13562): Terminating (SIGTERM) 08:29:43.579663 --- ParallelTerminationStrategy: PID 13550 died... 08:29:43.636237 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13550): Terminated: ok {rc=0} 08:29:43.646601 --- ParallelTerminationStrategy: PID 13551 died... 08:29:43.702981 run iperf3-srv_10.42.42.10(pid=13551): Terminated {rc=256} 08:29:43.713087 --- ParallelTerminationStrategy: PID 13552 died... 08:29:43.769421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13552): Terminated: ok {rc=0} 08:29:43.779463 --- ParallelTerminationStrategy: PID 13553 died... 08:29:43.835747 run iperf3-srv_10.42.42.10(pid=13553): Terminated {rc=256} 08:29:43.846035 --- ParallelTerminationStrategy: PID 13556 died... 08:29:43.902187 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13556): Terminated: ok {rc=0} 08:29:43.912486 --- ParallelTerminationStrategy: PID 13559 died... 08:29:43.968872 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13559): Terminated: ok {rc=0} 08:29:43.979017 --- ParallelTerminationStrategy: PID 13562 died... 08:29:44.035383 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13562): Terminated: ok {rc=0} 08:29:44.123203 bus /gobi_0: Setting Powered False 08:29:45.230789 bus /gobi_0: Setting Powered False 08:29:46.358274 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13560): Process ended prematurely: osmo-stp_10.42.42.5(pid=13560) [trial-2357↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13560)]