Failed
gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=16256): Process ended prematurely: osmo-stp_10.42.42.5(pid=16256) [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16256)]
Standard Output
---------------------------------------------- trial-2357 gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 08:49:18.795814 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:18.807457 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 08:49:18.954202 tst cs_paging_gprs_active.py: using LAC 20309 08:49:19.074490 tst cs_paging_gprs_active.py: using RAC 164 08:49:19.195530 tst cs_paging_gprs_active.py: using CellId 20309 08:49:19.315502 tst cs_paging_gprs_active.py: using BVCI 20310 08:49:19.339302 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:19.350786 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:19.362075 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:19.373402 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:19.384566 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:19.395828 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:19.407231 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:19.418441 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 08:49:19.429896 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:49:19.548071 tst gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 08:49:19.840405 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:49:19.970373 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:49:20.293421 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16246): Launched 08:49:20.563803 run iperf3-srv_10.42.42.10(pid=16247): Launched 08:49:20.754517 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:49:20.884919 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:49:21.209036 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16248): Launched 08:49:21.477921 run iperf3-srv_10.42.42.10(pid=16249): Launched 08:49:21.667870 tst cs_paging_gprs_active.py:38: start network... 08:49:21.798096 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:49:22.301464 run create_hlr_db(pid=16250): Launched 08:49:22.494953 bus /gobi_6: Setting Powered False 08:49:23.515104 run create_hlr_db(pid=16250): Terminated: ok {rc=0} 08:49:23.931654 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16252): Launched 08:49:24.244246 run osmo-hlr_10.42.42.2(pid=16253): Launched 08:49:24.359789 run osmo-stp_10.42.42.5: Starting osmo-stp 08:49:24.901131 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16255): Launched 08:49:25.214342 run osmo-stp_10.42.42.5(pid=16256): Launched 08:49:25.327361 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:49:25.870613 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16258): Launched 08:49:25.981746 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:49:26.253085 run patchelf(pid=16259): Launched 08:49:26.434760 run osmo-stp_10.42.42.5(pid=16256): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16256)] 08:49:26.567250 run osmo-stp_10.42.42.5(pid=16256): stdout: | (launched: 2022-12-09_08:49:25.060207) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:49:26.700195 run osmo-stp_10.42.42.5(pid=16256): stderr: | �[0;m�[38;5;43m20221209084925227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084925228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084925228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084925228 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084925229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084925229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084925229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:49:26.828790 run osmo-stp_10.42.42.5(pid=16256): stdout: | (launched: 2022-12-09_08:49:25.060207) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:49:26.956416 run osmo-stp_10.42.42.5(pid=16256): stderr: | �[0;m�[38;5;43m20221209084925227 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084925228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084925228 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084925228 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084925229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084925229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084925229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:49:27.104927 run patchelf(pid=16259): Terminating (SIGINT) 08:49:27.279670 run patchelf(pid=16259): Terminated: ok {rc=0} 08:49:27.311463 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=16256): Process ended prematurely: osmo-stp_10.42.42.5(pid=16256) [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16256)] [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 08:49:27.320709 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 08:49:27.381654 run osmo-hlr_10.42.42.2(pid=16253): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=16253)] 08:49:27.431223 run osmo-hlr_10.42.42.2(pid=16253): stdout: | (launched: 2022-12-09_08:49:24.090284) 08:49:27.481576 run osmo-hlr_10.42.42.2(pid=16253): stderr: | �[0;m�[1;31m20221209084924266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209084924266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209084924266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209084924266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209084924266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209084924266 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209084924279 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209084924289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209084924289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209084924289 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:49:27.524406 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16246): Terminating (SIGTERM) 08:49:27.564973 run iperf3-srv_10.42.42.10(pid=16247): Terminating (SIGTERM) 08:49:27.605854 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16248): Terminating (SIGTERM) 08:49:27.646475 run iperf3-srv_10.42.42.10(pid=16249): Terminating (SIGTERM) 08:49:27.687236 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16252): Terminating (SIGTERM) 08:49:27.727579 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16255): Terminating (SIGTERM) 08:49:27.768067 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16258): Terminating (SIGTERM) 08:49:27.777453 --- ParallelTerminationStrategy: PID 16246 died... 08:49:27.831655 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16246): Terminated: ok {rc=0} 08:49:27.841811 --- ParallelTerminationStrategy: PID 16247 died... 08:49:27.895788 run iperf3-srv_10.42.42.10(pid=16247): Terminated {rc=256} 08:49:27.905822 --- ParallelTerminationStrategy: PID 16248 died... 08:49:27.959994 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=16248): Terminated: ok {rc=0} 08:49:27.969831 --- ParallelTerminationStrategy: PID 16249 died... 08:49:28.024032 run iperf3-srv_10.42.42.10(pid=16249): Terminated {rc=256} 08:49:28.033875 --- ParallelTerminationStrategy: PID 16252 died... 08:49:28.088434 run pcap-recorder_any(filters='host 10.42.42.2')(pid=16252): Terminated: ok {rc=0} 08:49:28.098141 --- ParallelTerminationStrategy: PID 16255 died... 08:49:28.151708 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=16255): Terminated: ok {rc=0} 08:49:28.161788 --- ParallelTerminationStrategy: PID 16258 died... 08:49:28.215974 run pcap-recorder_any(filters='host 10.42.42.6')(pid=16258): Terminated: ok {rc=0} 08:49:28.306290 bus /gobi_0: Setting Powered False 08:49:29.411620 bus /gobi_0: Setting Powered False 08:49:30.523337 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=16256): Process ended prematurely: osmo-stp_10.42.42.5(pid=16256) [trial-2357↪gprs:trx-b200+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=16256)]