Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=15983): Process ended prematurely: osmo-stp_10.42.42.5(pid=15983) [trial-2357↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15983)]
Standard Output
---------------------------------------------- trial-2357 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 08:45:15.083493 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.094533 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 08:45:15.233825 tst cs_paging_gprs_active.py: using LAC 20289 08:45:15.357682 tst cs_paging_gprs_active.py: using RAC 144 08:45:15.479198 tst cs_paging_gprs_active.py: using CellId 20289 08:45:15.602398 tst cs_paging_gprs_active.py: using BVCI 20290 08:45:15.626193 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.636883 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.647510 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.658067 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.668497 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.678962 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.689585 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.700037 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 08:45:15.710718 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:45:15.832421 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 08:45:16.170500 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:45:16.303864 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:45:16.643284 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15973): Launched 08:45:16.924378 run iperf3-srv_10.42.42.10(pid=15974): Launched 08:45:17.119086 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:45:17.255223 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:45:17.600518 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15975): Launched 08:45:17.887325 run iperf3-srv_10.42.42.10(pid=15976): Launched 08:45:18.091182 tst cs_paging_gprs_active.py:38: start network... 08:45:18.230003 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:45:18.754360 run create_hlr_db(pid=15977): Launched 08:45:18.947304 bus /sierra_2: Setting Powered False 08:45:19.968617 run create_hlr_db(pid=15977): Terminated: ok {rc=0} 08:45:20.384219 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15979): Launched 08:45:20.695337 run osmo-hlr_10.42.42.2(pid=15980): Launched 08:45:20.819746 run osmo-stp_10.42.42.5: Starting osmo-stp 08:45:21.364296 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15982): Launched 08:45:21.676639 run osmo-stp_10.42.42.5(pid=15983): Launched 08:45:21.789833 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:45:22.331414 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15985): Launched 08:45:22.442590 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:45:22.713601 run patchelf(pid=15986): Launched 08:45:22.896059 run osmo-stp_10.42.42.5(pid=15983): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15983)] 08:45:23.029387 run osmo-stp_10.42.42.5(pid=15983): stdout: | (launched: 2022-12-09_08:45:21.522058) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:45:23.163067 run osmo-stp_10.42.42.5(pid=15983): stderr: | �[0;m�[38;5;43m20221209084521691 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084521691 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084521691 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084521692 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084521692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084521693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084521693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:45:23.291999 run osmo-stp_10.42.42.5(pid=15983): stdout: | (launched: 2022-12-09_08:45:21.522058) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:45:23.419381 run osmo-stp_10.42.42.5(pid=15983): stderr: | �[0;m�[38;5;43m20221209084521691 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209084521691 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209084521691 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209084521692 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209084521692 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209084521693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209084521693 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:45:23.567720 run patchelf(pid=15986): Terminating (SIGINT) 08:45:23.741560 run patchelf(pid=15986): Terminated: ok {rc=0} 08:45:23.773404 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=15983): Process ended prematurely: osmo-stp_10.42.42.5(pid=15983) [trial-2357↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15983)] [trial-2357↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 08:45:23.782685 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:45:23.843417 run osmo-hlr_10.42.42.2(pid=15980): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=15980)] 08:45:23.892845 run osmo-hlr_10.42.42.2(pid=15980): stdout: | (launched: 2022-12-09_08:45:20.542749) 08:45:23.943443 run osmo-hlr_10.42.42.2(pid=15980): stderr: | �[0;m�[1;31m20221209084520719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209084520719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209084520719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209084520719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209084520719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209084520719 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209084520731 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209084520739 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209084520739 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209084520739 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:45:23.986230 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15973): Terminating (SIGTERM) 08:45:24.026710 run iperf3-srv_10.42.42.10(pid=15974): Terminating (SIGTERM) 08:45:24.067298 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15975): Terminating (SIGTERM) 08:45:24.107691 run iperf3-srv_10.42.42.10(pid=15976): Terminating (SIGTERM) 08:45:24.148271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15979): Terminating (SIGTERM) 08:45:24.188637 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15982): Terminating (SIGTERM) 08:45:24.229446 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15985): Terminating (SIGTERM) 08:45:24.238943 --- ParallelTerminationStrategy: PID 15973 died... 08:45:24.293555 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15973): Terminated: ok {rc=0} 08:45:24.303394 --- ParallelTerminationStrategy: PID 15974 died... 08:45:24.357008 run iperf3-srv_10.42.42.10(pid=15974): Terminated {rc=256} 08:45:24.366805 --- ParallelTerminationStrategy: PID 15975 died... 08:45:24.420195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=15975): Terminated: ok {rc=0} 08:45:24.430044 --- ParallelTerminationStrategy: PID 15976 died... 08:45:24.483912 run iperf3-srv_10.42.42.10(pid=15976): Terminated {rc=256} 08:45:24.493927 --- ParallelTerminationStrategy: PID 15979 died... 08:45:24.547327 run pcap-recorder_any(filters='host 10.42.42.2')(pid=15979): Terminated: ok {rc=0} 08:45:24.557191 --- ParallelTerminationStrategy: PID 15982 died... 08:45:24.610365 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=15982): Terminated: ok {rc=0} 08:45:24.620179 --- ParallelTerminationStrategy: PID 15985 died... 08:45:24.673778 run pcap-recorder_any(filters='host 10.42.42.6')(pid=15985): Terminated: ok {rc=0} 08:45:24.758568 bus /gobi_0: Setting Powered False 08:45:25.867424 bus /gobi_0: Setting Powered False 08:45:26.980136 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=15983): Process ended prematurely: osmo-stp_10.42.42.5(pid=15983) [trial-2357↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=15983)]