Failed
gprs:trx-lms.cs_paging_gprs_active.py (from gprs_trx-lms)
Stacktrace
osmo-stp_10.42.42.5(pid=18915): Process ended prematurely: osmo-stp_10.42.42.5(pid=18915) [trial-2357↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18915)]
Standard Output
---------------------------------------------- trial-2357 gprs:trx-lms cs_paging_gprs_active.py ---------------------------------------------- 09:11:26.724078 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:26.735214 tst gprs:trx-lms: Using 1 x bts (candidates: 1) 09:11:26.882573 tst cs_paging_gprs_active.py: using LAC 20427 09:11:27.006480 tst cs_paging_gprs_active.py: using RAC 27 09:11:27.130345 tst cs_paging_gprs_active.py: using CellId 20427 09:11:27.253811 tst cs_paging_gprs_active.py: using BVCI 20428 09:11:27.278348 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:27.289551 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:27.300383 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:27.311789 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:27.322912 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:27.334075 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:27.345382 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:27.356498 tst gprs:trx-lms: Using 1 x ip_address (candidates: 9) 09:11:27.367822 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 09:11:27.488942 tst gprs:trx-lms: Using 1 x modem (candidates: 4) 09:11:27.783015 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 09:11:27.917754 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:11:28.249774 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18905): Launched 09:11:28.526040 run iperf3-srv_10.42.42.10(pid=18906): Launched 09:11:28.723519 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 09:11:28.857964 run iperf3-srv_10.42.42.10: Starting iperf3-srv 09:11:29.191114 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18907): Launched 09:11:29.467362 run iperf3-srv_10.42.42.10(pid=18908): Launched 09:11:29.665076 tst cs_paging_gprs_active.py:38: start network... 09:11:29.799952 run osmo-hlr_10.42.42.2: Starting osmo-hlr 09:11:30.308436 run create_hlr_db(pid=18909): Launched 09:11:30.481328 bus /sierra_2: Setting Powered False 09:11:31.518097 run create_hlr_db(pid=18909): Terminated: ok {rc=0} 09:11:31.979198 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18911): Launched 09:11:32.325155 run osmo-hlr_10.42.42.2(pid=18912): Launched 09:11:32.445467 run osmo-stp_10.42.42.5: Starting osmo-stp 09:11:33.003595 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18914): Launched 09:11:33.324656 run osmo-stp_10.42.42.5(pid=18915): Launched 09:11:33.442217 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 09:11:34.003126 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18917): Launched 09:11:34.118289 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 09:11:34.397847 run patchelf(pid=18918): Launched 09:11:34.585252 run osmo-stp_10.42.42.5(pid=18915): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18915)] 09:11:34.722475 run osmo-stp_10.42.42.5(pid=18915): stdout: | (launched: 2022-12-09_09:11:33.167201) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:11:34.859596 run osmo-stp_10.42.42.5(pid=18915): stderr: | �[0;m�[38;5;43m20221209091133354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209091133354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209091133354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209091133354 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209091133355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209091133355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209091133355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:11:34.992217 run osmo-stp_10.42.42.5(pid=18915): stdout: | (launched: 2022-12-09_09:11:33.167201) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 09:11:35.124098 run osmo-stp_10.42.42.5(pid=18915): stderr: | �[0;m�[38;5;43m20221209091133354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209091133354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209091133354 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209091133354 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209091133355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209091133355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209091133355 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 09:11:35.277236 run patchelf(pid=18918): Terminating (SIGINT) 09:11:35.456689 run patchelf(pid=18918): Terminated: ok {rc=0} 09:11:35.489717 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18915): Process ended prematurely: osmo-stp_10.42.42.5(pid=18915) [trial-2357↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18915)] [trial-2357↪gprs:trx-lms↪cs_paging_gprs_active.py:38] 09:11:35.499559 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 09:11:35.562398 run osmo-hlr_10.42.42.2(pid=18912): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:trx-lms↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18912)] 09:11:35.613383 run osmo-hlr_10.42.42.2(pid=18912): stdout: | (launched: 2022-12-09_09:11:32.164556) 09:11:35.665486 run osmo-hlr_10.42.42.2(pid=18912): stderr: | �[0;m�[1;31m20221209091132358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209091132358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209091132358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209091132358 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209091132359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209091132359 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209091132372 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:trx-lms/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209091132382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209091132382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209091132382 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 09:11:35.709664 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18905): Terminating (SIGTERM) 09:11:35.750979 run iperf3-srv_10.42.42.10(pid=18906): Terminating (SIGTERM) 09:11:35.792894 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18907): Terminating (SIGTERM) 09:11:35.834125 run iperf3-srv_10.42.42.10(pid=18908): Terminating (SIGTERM) 09:11:35.875593 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18911): Terminating (SIGTERM) 09:11:35.917717 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18914): Terminating (SIGTERM) 09:11:35.959222 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18917): Terminating (SIGTERM) 09:11:35.968826 --- ParallelTerminationStrategy: PID 18905 died... 09:11:36.024066 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18905): Terminated: ok {rc=0} 09:11:36.034350 --- ParallelTerminationStrategy: PID 18906 died... 09:11:36.089746 run iperf3-srv_10.42.42.10(pid=18906): Terminated {rc=256} 09:11:36.099629 --- ParallelTerminationStrategy: PID 18907 died... 09:11:36.154745 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18907): Terminated: ok {rc=0} 09:11:36.164844 --- ParallelTerminationStrategy: PID 18908 died... 09:11:36.220599 run iperf3-srv_10.42.42.10(pid=18908): Terminated {rc=256} 09:11:36.230522 --- ParallelTerminationStrategy: PID 18911 died... 09:11:36.285912 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18911): Terminated: ok {rc=0} 09:11:36.295757 --- ParallelTerminationStrategy: PID 18914 died... 09:11:36.351253 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18914): Terminated: ok {rc=0} 09:11:36.361389 --- ParallelTerminationStrategy: PID 18917 died... 09:11:36.416920 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18917): Terminated: ok {rc=0} 09:11:36.503029 bus /gobi_0: Setting Powered False 09:11:37.609321 bus /gobi_0: Setting Powered False 09:11:38.716185 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18915): Process ended prematurely: osmo-stp_10.42.42.5(pid=18915) [trial-2357↪gprs:trx-lms↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18915)]