Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13698): Process ended prematurely: osmo-stp_10.42.42.5(pid=13698) [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13698)]
Standard Output
---------------------------------------------- trial-2357 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 08:31:35.218070 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.229248 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 08:31:35.376414 tst cs_paging_gprs_active.py: using LAC 20216 08:31:35.496802 tst cs_paging_gprs_active.py: using RAC 71 08:31:35.618170 tst cs_paging_gprs_active.py: using CellId 20216 08:31:35.737719 tst cs_paging_gprs_active.py: using BVCI 20217 08:31:35.761686 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.772649 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.783433 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.794375 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.805281 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.816046 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.827107 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.837902 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 08:31:35.848747 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:31:35.966681 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 08:31:36.270452 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 08:31:36.410169 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:31:36.753833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13688): Launched 08:31:37.038199 run iperf3-srv_10.42.42.10(pid=13689): Launched 08:31:37.242047 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 08:31:37.381299 run iperf3-srv_10.42.42.10: Starting iperf3-srv 08:31:37.723703 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13690): Launched 08:31:38.007380 run iperf3-srv_10.42.42.10(pid=13691): Launched 08:31:38.211053 tst cs_paging_gprs_active.py:38: start network... 08:31:38.350470 run osmo-hlr_10.42.42.2: Starting osmo-hlr 08:31:38.874092 run create_hlr_db(pid=13692): Launched 08:31:39.066089 bus /gobi_6: Setting Powered False 08:31:40.086873 run create_hlr_db(pid=13692): Terminated: ok {rc=0} 08:31:40.501091 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13694): Launched 08:31:40.811580 run osmo-hlr_10.42.42.2(pid=13695): Launched 08:31:40.934338 run osmo-stp_10.42.42.5: Starting osmo-stp 08:31:41.475302 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13697): Launched 08:31:41.783735 run osmo-stp_10.42.42.5(pid=13698): Launched 08:31:41.897082 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 08:31:42.436143 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13700): Launched 08:31:42.546678 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 08:31:42.817110 run patchelf(pid=13701): Launched 08:31:42.998375 run osmo-stp_10.42.42.5(pid=13698): ERR: Terminated: ERROR {rc=1} [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13698)] 08:31:43.130588 run osmo-stp_10.42.42.5(pid=13698): stdout: | (launched: 2022-12-09_08:31:41.632687) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:31:43.262959 run osmo-stp_10.42.42.5(pid=13698): stderr: | �[0;m�[38;5;43m20221209083141800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083141800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083141800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083141801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083141801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083141801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083141801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:31:43.391015 run osmo-stp_10.42.42.5(pid=13698): stdout: | (launched: 2022-12-09_08:31:41.632687) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 08:31:43.518185 run osmo-stp_10.42.42.5(pid=13698): stderr: | �[0;m�[38;5;43m20221209083141800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209083141800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209083141800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209083141801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209083141801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209083141801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209083141801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 08:31:43.665937 run patchelf(pid=13701): Terminating (SIGINT) 08:31:43.839459 run patchelf(pid=13701): Terminated: ok {rc=0} 08:31:43.871243 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13698): Process ended prematurely: osmo-stp_10.42.42.5(pid=13698) [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13698)] [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 08:31:43.880498 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 08:31:43.940588 run osmo-hlr_10.42.42.2(pid=13695): ERR: Terminated: ERROR {rc=237} [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13695)] 08:31:43.989622 run osmo-hlr_10.42.42.2(pid=13695): stdout: | (launched: 2022-12-09_08:31:40.659403) 08:31:44.039171 run osmo-hlr_10.42.42.2(pid=13695): stderr: | �[0;m�[1;31m20221209083140834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209083140834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209083140834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209083140834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209083140834 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209083140835 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209083140846 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2357/run.2022-12-09_08-22-41/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209083140855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209083140855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209083140855 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 08:31:44.081711 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13688): Terminating (SIGTERM) 08:31:44.121771 run iperf3-srv_10.42.42.10(pid=13689): Terminating (SIGTERM) 08:31:44.161700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13690): Terminating (SIGTERM) 08:31:44.201661 run iperf3-srv_10.42.42.10(pid=13691): Terminating (SIGTERM) 08:31:44.241610 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13694): Terminating (SIGTERM) 08:31:44.281488 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13697): Terminating (SIGTERM) 08:31:44.321455 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13700): Terminating (SIGTERM) 08:31:44.330649 --- ParallelTerminationStrategy: PID 13688 died... 08:31:44.384290 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13688): Terminated: ok {rc=0} 08:31:44.394061 --- ParallelTerminationStrategy: PID 13689 died... 08:31:44.447234 run iperf3-srv_10.42.42.10(pid=13689): Terminated {rc=256} 08:31:44.456821 --- ParallelTerminationStrategy: PID 13690 died... 08:31:44.510061 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13690): Terminated: ok {rc=0} 08:31:44.519686 --- ParallelTerminationStrategy: PID 13691 died... 08:31:44.572642 run iperf3-srv_10.42.42.10(pid=13691): Terminated {rc=256} 08:31:44.582342 --- ParallelTerminationStrategy: PID 13694 died... 08:31:44.635383 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13694): Terminated: ok {rc=0} 08:31:44.645076 --- ParallelTerminationStrategy: PID 13697 died... 08:31:44.698018 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13697): Terminated: ok {rc=0} 08:31:44.707641 --- ParallelTerminationStrategy: PID 13700 died... 08:31:44.761245 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13700): Terminated: ok {rc=0} 08:31:44.850413 bus /gobi_0: Setting Powered False 08:31:45.975984 bus /gobi_0: Setting Powered False 08:31:47.124622 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13698): Process ended prematurely: osmo-stp_10.42.42.5(pid=13698) [trial-2357↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13698)]