Failed
gprs:sysmo+mod-bts0-dynts-ipa.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7538): Process ended prematurely: osmo-stp_10.42.42.5(pid=7538) [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7538)]
Standard Output
---------------------------------------------- trial-2360 gprs:sysmo+mod-bts0-dynts-ipa ping_idle_ping.py ---------------------------------------------- 12:54:44.835903 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:54:44.847756 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 12:54:44.994667 tst ping_idle_ping.py: using LAC 21598 12:54:45.113843 tst ping_idle_ping.py: using RAC 178 12:54:45.232427 tst ping_idle_ping.py: using CellId 21598 12:54:45.351042 tst ping_idle_ping.py: using BVCI 21599 12:54:45.374338 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:54:45.385245 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:54:45.395857 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:54:45.406559 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:54:45.417101 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:54:45.427592 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:54:45.438414 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 12:54:45.449184 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 12:54:45.743208 tst ping_idle_ping.py:24: start network... 12:54:45.896147 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:54:46.466368 run create_hlr_db(pid=7532): Launched 12:54:46.661287 bus /gobi_6: Setting Powered False 12:54:47.677075 run create_hlr_db(pid=7532): Terminated: ok {rc=0} 12:54:48.116547 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7534): Launched 12:54:48.434689 run osmo-hlr_10.42.42.2(pid=7535): Launched 12:54:48.552935 run osmo-stp_10.42.42.5: Starting osmo-stp 12:54:49.103576 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7537): Launched 12:54:49.422726 run osmo-stp_10.42.42.5(pid=7538): Launched 12:54:49.537107 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:54:50.089381 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7540): Launched 12:54:50.202435 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:54:50.479071 run patchelf(pid=7541): Launched 12:54:50.664759 run osmo-stp_10.42.42.5(pid=7538): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7538)] 12:54:50.800522 run osmo-stp_10.42.42.5(pid=7538): stdout: | (launched: 2022-12-09_12:54:49.264132) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:54:50.936445 run osmo-stp_10.42.42.5(pid=7538): stderr: | �[0;m�[38;5;43m20221209125449454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209125449454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209125449454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209125449455 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209125449455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209125449455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209125449455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:54:51.067966 run osmo-stp_10.42.42.5(pid=7538): stdout: | (launched: 2022-12-09_12:54:49.264132) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:54:51.198498 run osmo-stp_10.42.42.5(pid=7538): stderr: | �[0;m�[38;5;43m20221209125449454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209125449454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209125449454 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209125449455 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209125449455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209125449455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209125449455 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:54:51.350251 run patchelf(pid=7541): Terminating (SIGINT) 12:54:51.527375 run patchelf(pid=7541): Terminated: ok {rc=0} 12:54:51.559348 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=7538): Process ended prematurely: osmo-stp_10.42.42.5(pid=7538) [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7538)] [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27] 12:54:51.568554 tst ping_idle_ping.py:27: Test FAILED (6.7 sec) 12:54:51.633270 run osmo-hlr_10.42.42.2(pid=7535): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7535)] 12:54:51.685270 run osmo-hlr_10.42.42.2(pid=7535): stdout: | (launched: 2022-12-09_12:54:48.277870) 12:54:51.738034 run osmo-hlr_10.42.42.2(pid=7535): stderr: | �[0;m�[1;31m20221209125448478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209125448478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209125448478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209125448478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209125448478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209125448478 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209125448491 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:sysmo+mod-bts0-dynts-ipa/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209125448500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209125448500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209125448500 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:54:51.783216 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7534): Terminating (SIGTERM) 12:54:51.824903 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7537): Terminating (SIGTERM) 12:54:51.867283 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7540): Terminating (SIGTERM) 12:54:51.877696 --- ParallelTerminationStrategy: PID 7534 died... 12:54:51.934515 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7534): Terminated: ok {rc=0} 12:54:51.944486 --- ParallelTerminationStrategy: PID 7537 died... 12:54:52.000676 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7537): Terminated: ok {rc=0} 12:54:52.011343 --- ParallelTerminationStrategy: PID 7540 died... 12:54:52.067841 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7540): Terminated: ok {rc=0} 12:54:52.155271 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7538): Process ended prematurely: osmo-stp_10.42.42.5(pid=7538) [trial-2360↪gprs:sysmo+mod-bts0-dynts-ipa↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7538)]