Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=8836): Process ended prematurely: osmo-stp_10.42.42.5(pid=8836) [trial-2360↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8836)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 13:09:28.524488 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:28.535806 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 13:09:28.684356 tst cs_paging_gprs_active.py: using LAC 21677 13:09:28.812621 tst cs_paging_gprs_active.py: using RAC 2 13:09:28.940916 tst cs_paging_gprs_active.py: using CellId 21677 13:09:29.069820 tst cs_paging_gprs_active.py: using BVCI 21678 13:09:29.095291 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:29.106827 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:29.118065 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:29.129399 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:29.140582 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:29.152123 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:29.163448 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:29.174734 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 13:09:29.186982 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:09:29.303032 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 13:09:29.588788 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:09:29.719050 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:09:30.041003 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8826): Launched 13:09:30.309759 run iperf3-srv_10.42.42.10(pid=8827): Launched 13:09:30.499526 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:09:30.629460 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:09:30.978603 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8828): Launched 13:09:31.300579 run iperf3-srv_10.42.42.10(pid=8829): Launched 13:09:31.493302 tst cs_paging_gprs_active.py:38: start network... 13:09:31.625490 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:09:32.166395 run create_hlr_db(pid=8830): Launched 13:09:32.347238 bus /gobi_6: Setting Powered False 13:09:33.367264 run create_hlr_db(pid=8830): Terminated: ok {rc=0} 13:09:33.780066 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8832): Launched 13:09:34.091294 run osmo-hlr_10.42.42.2(pid=8833): Launched 13:09:34.207117 run osmo-stp_10.42.42.5: Starting osmo-stp 13:09:34.748502 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8835): Launched 13:09:35.060898 run osmo-stp_10.42.42.5(pid=8836): Launched 13:09:35.174799 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:09:35.716998 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8838): Launched 13:09:35.827846 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:09:36.099782 run patchelf(pid=8839): Launched 13:09:36.281693 run osmo-stp_10.42.42.5(pid=8836): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8836)] 13:09:36.414785 run osmo-stp_10.42.42.5(pid=8836): stdout: | (launched: 2022-12-09_13:09:34.906825) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:09:36.547969 run osmo-stp_10.42.42.5(pid=8836): stderr: | �[0;m�[38;5;43m20221209130935080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130935080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130935080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130935081 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130935081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130935081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130935081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:09:36.676831 run osmo-stp_10.42.42.5(pid=8836): stdout: | (launched: 2022-12-09_13:09:34.906825) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:09:36.804410 run osmo-stp_10.42.42.5(pid=8836): stderr: | �[0;m�[38;5;43m20221209130935080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130935080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130935080 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130935081 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130935081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130935081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130935081 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:09:36.952116 run patchelf(pid=8839): Terminating (SIGINT) 13:09:37.126337 run patchelf(pid=8839): Terminated: ok {rc=0} 13:09:37.158333 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8836): Process ended prematurely: osmo-stp_10.42.42.5(pid=8836) [trial-2360↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8836)] [trial-2360↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 13:09:37.167685 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 13:09:37.228264 run osmo-hlr_10.42.42.2(pid=8833): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8833)] 13:09:37.277520 run osmo-hlr_10.42.42.2(pid=8833): stdout: | (launched: 2022-12-09_13:09:33.938339) 13:09:37.327544 run osmo-hlr_10.42.42.2(pid=8833): stderr: | �[0;m�[1;31m20221209130934117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209130934117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209130934117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209130934117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209130934117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209130934117 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209130934128 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209130934136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209130934136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209130934136 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:09:37.370028 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8826): Terminating (SIGTERM) 13:09:37.409969 run iperf3-srv_10.42.42.10(pid=8827): Terminating (SIGTERM) 13:09:37.449975 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8828): Terminating (SIGTERM) 13:09:37.490000 run iperf3-srv_10.42.42.10(pid=8829): Terminating (SIGTERM) 13:09:37.530012 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8832): Terminating (SIGTERM) 13:09:37.570145 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8835): Terminating (SIGTERM) 13:09:37.610206 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8838): Terminating (SIGTERM) 13:09:37.619416 --- ParallelTerminationStrategy: PID 8826 died... 13:09:37.672924 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8826): Terminated: ok {rc=0} 13:09:37.682544 --- ParallelTerminationStrategy: PID 8827 died... 13:09:37.735676 run iperf3-srv_10.42.42.10(pid=8827): Terminated {rc=256} 13:09:37.745307 --- ParallelTerminationStrategy: PID 8828 died... 13:09:37.798606 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8828): Terminated: ok {rc=0} 13:09:37.808301 --- ParallelTerminationStrategy: PID 8829 died... 13:09:37.862620 run iperf3-srv_10.42.42.10(pid=8829): Terminated {rc=256} 13:09:37.872134 --- ParallelTerminationStrategy: PID 8832 died... 13:09:37.925166 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8832): Terminated: ok {rc=0} 13:09:37.934759 --- ParallelTerminationStrategy: PID 8835 died... 13:09:37.987620 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8835): Terminated: ok {rc=0} 13:09:37.997221 --- ParallelTerminationStrategy: PID 8838 died... 13:09:38.050071 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8838): Terminated: ok {rc=0} 13:09:38.138699 bus /gobi_0: Setting Powered False 13:09:39.243120 bus /gobi_0: Setting Powered False 13:09:40.356320 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8836): Process ended prematurely: osmo-stp_10.42.42.5(pid=8836) [trial-2360↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8836)]