Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9595): Process ended prematurely: osmo-stp_10.42.42.5(pid=9595) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9595)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 13:20:23.479681 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:23.491402 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:20:23.658792 tst cs_paging_gprs_active.py: using LAC 21734 13:20:23.789117 tst cs_paging_gprs_active.py: using RAC 59 13:20:23.917825 tst cs_paging_gprs_active.py: using CellId 21734 13:20:24.046271 tst cs_paging_gprs_active.py: using BVCI 21735 13:20:24.071515 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:24.083237 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:24.094585 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:24.106119 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:24.117578 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:24.129578 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:24.141377 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:24.153213 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:20:24.165704 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:20:24.284369 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:20:24.566589 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:20:24.695809 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:20:25.014986 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9585): Launched 13:20:25.280060 run iperf3-srv_10.42.42.10(pid=9586): Launched 13:20:25.467797 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:20:25.596215 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:20:25.914918 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9587): Launched 13:20:26.180205 run iperf3-srv_10.42.42.10(pid=9588): Launched 13:20:26.368791 tst cs_paging_gprs_active.py:38: start network... 13:20:26.497557 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:20:26.991443 run create_hlr_db(pid=9589): Launched 13:20:27.168150 bus /gobi_6: Setting Powered False 13:20:28.189345 run create_hlr_db(pid=9589): Terminated: ok {rc=0} 13:20:28.624644 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9591): Launched 13:20:28.953441 run osmo-hlr_10.42.42.2(pid=9592): Launched 13:20:29.076836 run osmo-stp_10.42.42.5: Starting osmo-stp 13:20:29.646276 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9594): Launched 13:20:29.973170 run osmo-stp_10.42.42.5(pid=9595): Launched 13:20:30.092377 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:20:30.664223 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9597): Launched 13:20:30.781473 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:20:31.106832 run patchelf(pid=9598): Launched 13:20:31.303338 run osmo-stp_10.42.42.5(pid=9595): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9595)] 13:20:31.447483 run osmo-stp_10.42.42.5(pid=9595): stdout: | (launched: 2022-12-09_13:20:29.812643) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:20:31.592357 run osmo-stp_10.42.42.5(pid=9595): stderr: | �[0;m�[38;5;43m20221209132030002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132030002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132030002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132030003 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132030003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132030003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132030003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:20:31.732188 run osmo-stp_10.42.42.5(pid=9595): stdout: | (launched: 2022-12-09_13:20:29.812643) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:20:31.870805 run osmo-stp_10.42.42.5(pid=9595): stderr: | �[0;m�[38;5;43m20221209132030002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132030002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132030002 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132030003 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132030003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132030003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132030003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:20:32.031430 run patchelf(pid=9598): Terminating (SIGINT) 13:20:32.216487 run patchelf(pid=9598): Terminated: ok {rc=0} 13:20:32.250402 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=9595): Process ended prematurely: osmo-stp_10.42.42.5(pid=9595) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9595)] [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 13:20:32.260565 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 13:20:32.325307 run osmo-hlr_10.42.42.2(pid=9592): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9592)] 13:20:32.377415 run osmo-hlr_10.42.42.2(pid=9592): stdout: | (launched: 2022-12-09_13:20:28.791692) 13:20:32.430293 run osmo-hlr_10.42.42.2(pid=9592): stderr: | �[0;m�[1;31m20221209132028991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132028991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132028991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132028991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132028991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132028991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132029003 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132029012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132029012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132029012 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:20:32.475067 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9585): Terminating (SIGTERM) 13:20:32.517512 run iperf3-srv_10.42.42.10(pid=9586): Terminating (SIGTERM) 13:20:32.559702 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9587): Terminating (SIGTERM) 13:20:32.602317 run iperf3-srv_10.42.42.10(pid=9588): Terminating (SIGTERM) 13:20:32.644634 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9591): Terminating (SIGTERM) 13:20:32.686744 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9594): Terminating (SIGTERM) 13:20:32.729336 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9597): Terminating (SIGTERM) 13:20:32.739351 --- ParallelTerminationStrategy: PID 9585 died... 13:20:32.795960 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9585): Terminated: ok {rc=0} 13:20:32.806135 --- ParallelTerminationStrategy: PID 9586 died... 13:20:32.862289 run iperf3-srv_10.42.42.10(pid=9586): Terminated {rc=256} 13:20:32.872401 --- ParallelTerminationStrategy: PID 9587 died... 13:20:32.928569 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=9587): Terminated: ok {rc=0} 13:20:32.938683 --- ParallelTerminationStrategy: PID 9588 died... 13:20:32.994485 run iperf3-srv_10.42.42.10(pid=9588): Terminated {rc=256} 13:20:33.005201 --- ParallelTerminationStrategy: PID 9591 died... 13:20:33.061650 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9591): Terminated: ok {rc=0} 13:20:33.071784 --- ParallelTerminationStrategy: PID 9594 died... 13:20:33.128081 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9594): Terminated: ok {rc=0} 13:20:33.138213 --- ParallelTerminationStrategy: PID 9597 died... 13:20:33.194313 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9597): Terminated: ok {rc=0} 13:20:33.280624 bus /gobi_0: Setting Powered False 13:20:34.386666 bus /gobi_0: Setting Powered False 13:20:35.494990 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9595): Process ended prematurely: osmo-stp_10.42.42.5(pid=9595) [trial-2360↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9595)]