Failed
gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=10509): Process ended prematurely: osmo-stp_10.42.42.5(pid=10509) [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10509)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 13:29:39.449654 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:39.461061 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 13:29:39.603326 tst cs_paging_gprs_active.py: using LAC 21783 13:29:39.721809 tst cs_paging_gprs_active.py: using RAC 108 13:29:39.838050 tst cs_paging_gprs_active.py: using CellId 21783 13:29:39.954256 tst cs_paging_gprs_active.py: using BVCI 21784 13:29:39.977455 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:39.988680 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:39.999781 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:40.011110 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:40.022144 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:40.033568 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:40.044798 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:40.055954 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:29:40.067424 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:29:40.180719 tst gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:29:40.473792 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:29:40.607414 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:29:40.937434 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10499): Launched 13:29:41.211756 run iperf3-srv_10.42.42.10(pid=10500): Launched 13:29:41.407779 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:29:41.541430 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:29:41.871984 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Launched 13:29:42.146507 run iperf3-srv_10.42.42.10(pid=10502): Launched 13:29:42.342556 tst cs_paging_gprs_active.py:38: start network... 13:29:42.475849 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:29:42.985098 run create_hlr_db(pid=10503): Launched 13:29:43.158232 bus /gobi_6: Setting Powered False 13:29:44.178546 run create_hlr_db(pid=10503): Terminated: ok {rc=0} 13:29:44.603369 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10505): Launched 13:29:44.924612 run osmo-hlr_10.42.42.2(pid=10506): Launched 13:29:45.045381 run osmo-stp_10.42.42.5: Starting osmo-stp 13:29:45.601734 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10508): Launched 13:29:46.037750 run osmo-stp_10.42.42.5(pid=10509): Launched 13:29:46.253363 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:29:46.968706 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10511): Launched 13:29:47.095595 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:29:47.392486 run patchelf(pid=10512): Launched 13:29:47.579591 run osmo-stp_10.42.42.5(pid=10509): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10509)] 13:29:47.716354 run osmo-stp_10.42.42.5(pid=10509): stdout: | (launched: 2022-12-09_13:29:45.763681) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:29:47.853207 run osmo-stp_10.42.42.5(pid=10509): stderr: | �[0;m�[38;5;43m20221209132946037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132946038 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132946038 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132946038 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132946039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132946039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132946039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:29:47.985461 run osmo-stp_10.42.42.5(pid=10509): stdout: | (launched: 2022-12-09_13:29:45.763681) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:29:48.116756 run osmo-stp_10.42.42.5(pid=10509): stderr: | �[0;m�[38;5;43m20221209132946037 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132946038 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132946038 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132946038 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132946039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132946039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132946039 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:29:48.268691 run patchelf(pid=10512): Terminating (SIGINT) 13:29:48.447541 run patchelf(pid=10512): Terminated: ok {rc=0} 13:29:48.480399 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10509): Process ended prematurely: osmo-stp_10.42.42.5(pid=10509) [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10509)] [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 13:29:48.490531 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 13:29:48.554668 run osmo-hlr_10.42.42.2(pid=10506): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10506)] 13:29:48.607059 run osmo-hlr_10.42.42.2(pid=10506): stdout: | (launched: 2022-12-09_13:29:44.766529) 13:29:48.660558 run osmo-hlr_10.42.42.2(pid=10506): stderr: | �[0;m�[1;31m20221209132944967 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132944967 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132944967 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132944967 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132944967 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132944967 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132944979 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132944987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132944987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132944987 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:29:48.705794 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10499): Terminating (SIGTERM) 13:29:48.747941 run iperf3-srv_10.42.42.10(pid=10500): Terminating (SIGTERM) 13:29:48.790501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Terminating (SIGTERM) 13:29:48.833214 run iperf3-srv_10.42.42.10(pid=10502): Terminating (SIGTERM) 13:29:48.875463 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10505): Terminating (SIGTERM) 13:29:48.918276 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10508): Terminating (SIGTERM) 13:29:48.960620 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10511): Terminating (SIGTERM) 13:29:48.970072 --- ParallelTerminationStrategy: PID 10499 died... 13:29:49.026701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10499): Terminated: ok {rc=0} 13:29:49.037198 --- ParallelTerminationStrategy: PID 10500 died... 13:29:49.093196 run iperf3-srv_10.42.42.10(pid=10500): Terminated {rc=256} 13:29:49.103565 --- ParallelTerminationStrategy: PID 10501 died... 13:29:49.159795 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10501): Terminated: ok {rc=0} 13:29:49.169796 --- ParallelTerminationStrategy: PID 10502 died... 13:29:49.225871 run iperf3-srv_10.42.42.10(pid=10502): Terminated {rc=256} 13:29:49.235853 --- ParallelTerminationStrategy: PID 10505 died... 13:29:49.292014 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10505): Terminated: ok {rc=0} 13:29:49.302424 --- ParallelTerminationStrategy: PID 10508 died... 13:29:49.359101 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10508): Terminated: ok {rc=0} 13:29:49.369405 --- ParallelTerminationStrategy: PID 10511 died... 13:29:49.425512 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10511): Terminated: ok {rc=0} 13:29:49.515932 bus /gobi_0: Setting Powered False 13:29:50.619832 bus /gobi_0: Setting Powered False 13:29:51.730174 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10509): Process ended prematurely: osmo-stp_10.42.42.5(pid=10509) [trial-2360↪gprs:trx-umtrx+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10509)]