Failed
dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=9661): Process ended prematurely: osmo-stp_10.42.42.5(pid=9661) [trial-2360↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9661)]
Standard Output
---------------------------------------------- trial-2360 dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 13:21:23.782658 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:21:23.794635 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 13:21:23.954562 tst switch_tch_pdch.py: using LAC 21739 13:21:24.077707 tst switch_tch_pdch.py: using RAC 64 13:21:24.194626 tst switch_tch_pdch.py: using CellId 21739 13:21:24.311787 tst switch_tch_pdch.py: using BVCI 21740 13:21:24.334781 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:21:24.346160 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:21:24.357414 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:21:24.369115 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:21:24.380618 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:21:24.392217 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:21:24.404535 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 13:21:24.416389 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 13:21:24.536746 tst dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 13:21:24.828293 tst switch_tch_pdch.py:51: start network... 13:21:24.962505 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:21:25.470125 run create_hlr_db(pid=9655): Launched 13:21:25.657151 bus /gobi_6: Setting Powered False 13:21:26.677404 run create_hlr_db(pid=9655): Terminated: ok {rc=0} 13:21:27.083271 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9657): Launched 13:21:27.387140 run osmo-hlr_10.42.42.2(pid=9658): Launched 13:21:27.500045 run osmo-stp_10.42.42.5: Starting osmo-stp 13:21:28.022518 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9660): Launched 13:21:28.324391 run osmo-stp_10.42.42.5(pid=9661): Launched 13:21:28.434086 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:21:28.958782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9663): Launched 13:21:29.065595 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:21:29.327734 run patchelf(pid=9664): Launched 13:21:29.503823 run osmo-stp_10.42.42.5(pid=9661): ERR: Terminated: ERROR {rc=1} [trial-2360↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9661)] 13:21:29.632265 run osmo-stp_10.42.42.5(pid=9661): stdout: | (launched: 2022-12-09_13:21:28.175192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:21:29.760821 run osmo-stp_10.42.42.5(pid=9661): stderr: | �[0;m�[38;5;43m20221209132128345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132128345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132128345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132128346 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132128346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132128346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132128346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:21:29.884636 run osmo-stp_10.42.42.5(pid=9661): stdout: | (launched: 2022-12-09_13:21:28.175192) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:21:30.007900 run osmo-stp_10.42.42.5(pid=9661): stderr: | �[0;m�[38;5;43m20221209132128345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132128345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132128345 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132128346 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132128346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132128346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132128346 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:21:30.151235 run patchelf(pid=9664): Terminating (SIGINT) 13:21:30.319105 run patchelf(pid=9664): Terminated: ok {rc=0} 13:21:30.349560 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=9661): Process ended prematurely: osmo-stp_10.42.42.5(pid=9661) [trial-2360↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9661)] [trial-2360↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 13:21:30.358111 tst switch_tch_pdch.py:54: Test FAILED (6.6 sec) 13:21:30.417437 run osmo-hlr_10.42.42.2(pid=9658): ERR: Terminated: ERROR {rc=237} [trial-2360↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9658)] 13:21:30.466137 run osmo-hlr_10.42.42.2(pid=9658): stdout: | (launched: 2022-12-09_13:21:27.237100) 13:21:30.515408 run osmo-hlr_10.42.42.2(pid=9658): stderr: | �[0;m�[1;31m20221209132127414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132127414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132127414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132127414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132127414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132127414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132127426 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132127435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132127435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132127435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:21:30.557248 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9657): Terminating (SIGTERM) 13:21:30.596629 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9660): Terminating (SIGTERM) 13:21:30.635921 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9663): Terminating (SIGTERM) 13:21:30.645055 --- ParallelTerminationStrategy: PID 9657 died... 13:21:30.697789 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9657): Terminated: ok {rc=0} 13:21:30.707211 --- ParallelTerminationStrategy: PID 9660 died... 13:21:30.760161 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9660): Terminated: ok {rc=0} 13:21:30.769712 --- ParallelTerminationStrategy: PID 9663 died... 13:21:30.822160 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9663): Terminated: ok {rc=0} 13:21:30.930922 bus /gobi_0: Setting Powered False 13:21:32.035995 bus /gobi_0: Setting Powered False 13:21:33.141404 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9661): Process ended prematurely: osmo-stp_10.42.42.5(pid=9661) [trial-2360↪dynts:trx-sysmocell5000+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9661)]