Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=13683): Process ended prematurely: osmo-stp_10.42.42.5(pid=13683) [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13683)]
Standard Output
---------------------------------------------- trial-2360 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 13:59:04.026751 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.039276 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 13:59:04.185576 tst iperf3m4.py: using LAC 21940 13:59:04.311948 tst iperf3m4.py: using RAC 10 13:59:04.437701 tst iperf3m4.py: using CellId 21940 13:59:04.561714 tst iperf3m4.py: using BVCI 21941 13:59:04.584700 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.596062 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.607678 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.619546 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.630823 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.642133 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.653359 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.664337 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 13:59:04.675610 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:59:04.792854 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:59:04.909846 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:59:05.028523 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 13:59:05.320282 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 13:59:05.454515 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:59:05.785022 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13669): Launched 13:59:06.059541 run iperf3-srv_10.42.42.10(pid=13670): Launched 13:59:06.255744 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 13:59:06.389757 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:59:06.720175 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13671): Launched 13:59:06.994496 run iperf3-srv_10.42.42.10(pid=13672): Launched 13:59:07.190748 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 13:59:07.324599 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:59:07.656028 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13673): Launched 13:59:07.930668 run iperf3-srv_10.42.42.10(pid=13674): Launched 13:59:08.126231 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 13:59:08.260392 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:59:08.590704 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13675): Launched 13:59:08.866205 run iperf3-srv_10.42.42.10(pid=13676): Launched 13:59:09.062133 tst iperf3m4.py:8: start network... 13:59:09.196138 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:59:09.698926 run create_hlr_db(pid=13677): Launched 13:59:09.884344 bus /gobi_6: Setting Powered False 13:59:10.905162 run create_hlr_db(pid=13677): Terminated: ok {rc=0} 13:59:11.306285 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13679): Launched 13:59:11.606353 run osmo-hlr_10.42.42.2(pid=13680): Launched 13:59:11.720934 run osmo-stp_10.42.42.5: Starting osmo-stp 13:59:12.240168 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13682): Launched 13:59:12.540833 run osmo-stp_10.42.42.5(pid=13683): Launched 13:59:12.650927 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:59:13.173811 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13685): Launched 13:59:13.281116 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:59:13.542028 run patchelf(pid=13686): Launched 13:59:13.717601 run osmo-stp_10.42.42.5(pid=13683): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13683)] 13:59:13.846004 run osmo-stp_10.42.42.5(pid=13683): stdout: | (launched: 2022-12-09_13:59:12.392871) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:59:13.974849 run osmo-stp_10.42.42.5(pid=13683): stderr: | �[0;m�[38;5;43m20221209135912557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209135912557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209135912557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209135912558 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209135912558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209135912558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209135912558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:59:14.099182 run osmo-stp_10.42.42.5(pid=13683): stdout: | (launched: 2022-12-09_13:59:12.392871) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:59:14.222431 run osmo-stp_10.42.42.5(pid=13683): stderr: | �[0;m�[38;5;43m20221209135912557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209135912557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209135912557 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209135912558 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209135912558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209135912558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209135912558 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:59:14.365791 run patchelf(pid=13686): Terminating (SIGINT) 13:59:14.534086 run patchelf(pid=13686): Terminated: ok {rc=0} 13:59:14.565370 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=13683): Process ended prematurely: osmo-stp_10.42.42.5(pid=13683) [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13683)] [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 13:59:14.574544 tst iperf3m4.py:8: Test FAILED (10.6 sec) 13:59:14.634685 run osmo-hlr_10.42.42.2(pid=13680): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13680)] 13:59:14.683389 run osmo-hlr_10.42.42.2(pid=13680): stdout: | (launched: 2022-12-09_13:59:11.458522) 13:59:14.733831 run osmo-hlr_10.42.42.2(pid=13680): stderr: | �[0;m�[1;31m20221209135911632 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209135911632 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209135911632 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209135911632 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209135911632 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209135911632 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209135911644 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209135911653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209135911653 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209135911654 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:59:14.775859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13669): Terminating (SIGTERM) 13:59:14.815594 run iperf3-srv_10.42.42.10(pid=13670): Terminating (SIGTERM) 13:59:14.855437 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13671): Terminating (SIGTERM) 13:59:14.895198 run iperf3-srv_10.42.42.10(pid=13672): Terminating (SIGTERM) 13:59:14.934930 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13673): Terminating (SIGTERM) 13:59:14.974519 run iperf3-srv_10.42.42.10(pid=13674): Terminating (SIGTERM) 13:59:15.014240 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13675): Terminating (SIGTERM) 13:59:15.053815 run iperf3-srv_10.42.42.10(pid=13676): Terminating (SIGTERM) 13:59:15.093473 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13679): Terminating (SIGTERM) 13:59:15.133248 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13682): Terminating (SIGTERM) 13:59:15.173625 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13685): Terminating (SIGTERM) 13:59:15.182871 --- ParallelTerminationStrategy: PID 13669 died... 13:59:15.236091 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13669): Terminated: ok {rc=0} 13:59:15.245896 --- ParallelTerminationStrategy: PID 13670 died... 13:59:15.298968 run iperf3-srv_10.42.42.10(pid=13670): Terminated {rc=256} 13:59:15.308513 --- ParallelTerminationStrategy: PID 13671 died... 13:59:15.361925 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13671): Terminated: ok {rc=0} 13:59:15.371616 --- ParallelTerminationStrategy: PID 13672 died... 13:59:15.424593 run iperf3-srv_10.42.42.10(pid=13672): Terminated {rc=256} 13:59:15.434172 --- ParallelTerminationStrategy: PID 13673 died... 13:59:15.486856 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13673): Terminated: ok {rc=0} 13:59:15.496509 --- ParallelTerminationStrategy: PID 13674 died... 13:59:15.549113 run iperf3-srv_10.42.42.10(pid=13674): Terminated {rc=256} 13:59:15.558910 --- ParallelTerminationStrategy: PID 13675 died... 13:59:15.611815 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13675): Terminated: ok {rc=0} 13:59:15.621460 --- ParallelTerminationStrategy: PID 13676 died... 13:59:15.673857 run iperf3-srv_10.42.42.10(pid=13676): Terminated {rc=256} 13:59:15.683589 --- ParallelTerminationStrategy: PID 13679 died... 13:59:15.736116 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13679): Terminated: ok {rc=0} 13:59:15.745726 --- ParallelTerminationStrategy: PID 13682 died... 13:59:15.798508 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13682): Terminated: ok {rc=0} 13:59:15.808299 --- ParallelTerminationStrategy: PID 13685 died... 13:59:15.861762 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13685): Terminated: ok {rc=0} 13:59:15.949905 bus /gobi_4: Setting Powered False 13:59:17.064847 bus /gobi_4: Setting Powered False 13:59:18.175485 bus /gobi_1: Setting Powered False 13:59:19.277638 bus /gobi_1: Setting Powered False 13:59:20.388504 bus /gobi_0: Setting Powered False 13:59:21.491130 bus /gobi_0: Setting Powered False 13:59:22.603398 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13683): Process ended prematurely: osmo-stp_10.42.42.5(pid=13683) [trial-2360↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13683)]