Failed
gprs:oc2g+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=8155): Process ended prematurely: osmo-stp_10.42.42.5(pid=8155) [trial-2360↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8155)]
Standard Output
---------------------------------------------- trial-2360 gprs:oc2g+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 13:03:37.524462 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:03:37.537193 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:03:37.692589 tst ping_idle_ping.py: using LAC 21645 13:03:37.818762 tst ping_idle_ping.py: using RAC 225 13:03:37.945269 tst ping_idle_ping.py: using CellId 21645 13:03:38.067025 tst ping_idle_ping.py: using BVCI 21646 13:03:38.090524 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:03:38.101813 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:03:38.112800 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:03:38.124452 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:03:38.136060 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:03:38.147562 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:03:38.159127 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:03:38.170587 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:03:38.451591 tst ping_idle_ping.py:24: start network... 13:03:38.578896 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:03:39.073957 run create_hlr_db(pid=8149): Launched 13:03:39.249961 bus /gobi_6: Setting Powered False 13:03:40.271426 run create_hlr_db(pid=8149): Terminated: ok {rc=0} 13:03:40.701880 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8151): Launched 13:03:41.025126 run osmo-hlr_10.42.42.2(pid=8152): Launched 13:03:41.146308 run osmo-stp_10.42.42.5: Starting osmo-stp 13:03:41.680035 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8154): Launched 13:03:41.983483 run osmo-stp_10.42.42.5(pid=8155): Launched 13:03:42.092573 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:03:42.624229 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8157): Launched 13:03:42.732569 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:03:42.997218 run patchelf(pid=8158): Launched 13:03:43.175251 run osmo-stp_10.42.42.5(pid=8155): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8155)] 13:03:43.305470 run osmo-stp_10.42.42.5(pid=8155): stdout: | (launched: 2022-12-09_13:03:41.834263) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:03:43.436038 run osmo-stp_10.42.42.5(pid=8155): stderr: | �[0;m�[38;5;43m20221209130342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130342007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130342007 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130342007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130342008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130342008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:03:43.562447 run osmo-stp_10.42.42.5(pid=8155): stdout: | (launched: 2022-12-09_13:03:41.834263) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:03:43.687127 run osmo-stp_10.42.42.5(pid=8155): stderr: | �[0;m�[38;5;43m20221209130342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209130342006 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209130342007 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209130342007 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209130342007 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209130342008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209130342008 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:03:43.831814 run patchelf(pid=8158): Terminating (SIGINT) 13:03:44.001859 run patchelf(pid=8158): Terminated: ok {rc=0} 13:03:44.032512 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=8155): Process ended prematurely: osmo-stp_10.42.42.5(pid=8155) [trial-2360↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8155)] [trial-2360↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 13:03:44.041339 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 13:03:44.101708 run osmo-hlr_10.42.42.2(pid=8152): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8152)] 13:03:44.151010 run osmo-hlr_10.42.42.2(pid=8152): stdout: | (launched: 2022-12-09_13:03:40.866135) 13:03:44.200815 run osmo-hlr_10.42.42.2(pid=8152): stderr: | �[0;m�[1;31m20221209130341066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209130341066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209130341066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209130341066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209130341066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209130341066 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209130341079 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:oc2g+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209130341088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209130341088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209130341088 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:03:44.243494 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8151): Terminating (SIGTERM) 13:03:44.284383 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8154): Terminating (SIGTERM) 13:03:44.325188 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8157): Terminating (SIGTERM) 13:03:44.334406 --- ParallelTerminationStrategy: PID 8151 died... 13:03:44.388267 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8151): Terminated: ok {rc=0} 13:03:44.398218 --- ParallelTerminationStrategy: PID 8154 died... 13:03:44.452212 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8154): Terminated: ok {rc=0} 13:03:44.462013 --- ParallelTerminationStrategy: PID 8157 died... 13:03:44.515361 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8157): Terminated: ok {rc=0} 13:03:44.599748 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8155): Process ended prematurely: osmo-stp_10.42.42.5(pid=8155) [trial-2360↪gprs:oc2g+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8155)]