Failed
gprs:sysmo+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7556): Process ended prematurely: osmo-stp_10.42.42.5(pid=7556) [trial-2360↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7556)]
Standard Output
---------------------------------------------- trial-2360 gprs:sysmo+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 12:54:54.283049 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.294274 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 12:54:54.445245 tst cs_paging_gprs_active.py: using LAC 21599 12:54:54.570715 tst cs_paging_gprs_active.py: using RAC 179 12:54:54.694485 tst cs_paging_gprs_active.py: using CellId 21599 12:54:54.820573 tst cs_paging_gprs_active.py: using BVCI 21600 12:54:54.845090 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.856262 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.867277 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.878999 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.890605 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.902235 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.914028 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.925595 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 12:54:54.937518 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:54:55.052539 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 12:54:55.345363 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 12:54:55.479241 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:54:55.811251 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7546): Launched 12:54:56.087869 run iperf3-srv_10.42.42.10(pid=7547): Launched 12:54:56.285142 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 12:54:56.418965 run iperf3-srv_10.42.42.10: Starting iperf3-srv 12:54:56.751659 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7548): Launched 12:54:57.028269 run iperf3-srv_10.42.42.10(pid=7549): Launched 12:54:57.225151 tst cs_paging_gprs_active.py:38: start network... 12:54:57.359498 run osmo-hlr_10.42.42.2: Starting osmo-hlr 12:54:57.865308 run create_hlr_db(pid=7550): Launched 12:54:58.050232 bus /gobi_6: Setting Powered False 12:54:59.071428 run create_hlr_db(pid=7550): Terminated: ok {rc=0} 12:54:59.498027 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7552): Launched 12:54:59.820550 run osmo-hlr_10.42.42.2(pid=7553): Launched 12:54:59.941274 run osmo-stp_10.42.42.5: Starting osmo-stp 12:55:00.500406 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7555): Launched 12:55:00.822866 run osmo-stp_10.42.42.5(pid=7556): Launched 12:55:01.030725 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 12:55:01.672933 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7558): Launched 12:55:01.784124 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 12:55:02.091788 run patchelf(pid=7562): Launched 12:55:02.273955 run osmo-stp_10.42.42.5(pid=7556): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7556)] 12:55:02.402622 run osmo-stp_10.42.42.5(pid=7556): stdout: | (launched: 2022-12-09_12:55:00.663621) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:55:02.531618 run osmo-stp_10.42.42.5(pid=7556): stderr: | �[0;m�[38;5;43m20221209125500895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209125500895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209125500895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209125500896 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209125500896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209125500896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209125500896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:55:02.656059 run osmo-stp_10.42.42.5(pid=7556): stdout: | (launched: 2022-12-09_12:55:00.663621) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 12:55:02.779706 run osmo-stp_10.42.42.5(pid=7556): stderr: | �[0;m�[38;5;43m20221209125500895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209125500895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209125500895 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209125500896 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209125500896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209125500896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209125500896 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 12:55:02.922567 run patchelf(pid=7562): Terminating (SIGINT) 12:55:03.090310 run patchelf(pid=7562): Terminated: ok {rc=0} 12:55:03.121572 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7556): Process ended prematurely: osmo-stp_10.42.42.5(pid=7556) [trial-2360↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7556)] [trial-2360↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 12:55:03.130981 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 12:55:03.190283 run osmo-hlr_10.42.42.2(pid=7553): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7553)] 12:55:03.238483 run osmo-hlr_10.42.42.2(pid=7553): stdout: | (launched: 2022-12-09_12:54:59.661065) 12:55:03.287746 run osmo-hlr_10.42.42.2(pid=7553): stderr: | �[0;m�[1;31m20221209125459858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209125459859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209125459859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209125459859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209125459859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209125459859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209125459871 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:sysmo+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209125459879 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209125459880 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209125459880 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 12:55:03.329648 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7546): Terminating (SIGTERM) 12:55:03.369136 run iperf3-srv_10.42.42.10(pid=7547): Terminating (SIGTERM) 12:55:03.408727 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7548): Terminating (SIGTERM) 12:55:03.448042 run iperf3-srv_10.42.42.10(pid=7549): Terminating (SIGTERM) 12:55:03.487467 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7552): Terminating (SIGTERM) 12:55:03.526860 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7555): Terminating (SIGTERM) 12:55:03.566268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7558): Terminating (SIGTERM) 12:55:03.575322 --- ParallelTerminationStrategy: PID 7546 died... 12:55:03.628372 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7546): Terminated: ok {rc=0} 12:55:03.638218 --- ParallelTerminationStrategy: PID 7547 died... 12:55:03.691394 run iperf3-srv_10.42.42.10(pid=7547): Terminated {rc=256} 12:55:03.701002 --- ParallelTerminationStrategy: PID 7548 died... 12:55:03.753457 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7548): Terminated: ok {rc=0} 12:55:03.763131 --- ParallelTerminationStrategy: PID 7549 died... 12:55:03.815533 run iperf3-srv_10.42.42.10(pid=7549): Terminated {rc=256} 12:55:03.825339 --- ParallelTerminationStrategy: PID 7552 died... 12:55:03.878362 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7552): Terminated: ok {rc=0} 12:55:03.887937 --- ParallelTerminationStrategy: PID 7555 died... 12:55:03.940798 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7555): Terminated: ok {rc=0} 12:55:03.950490 --- ParallelTerminationStrategy: PID 7558 died... 12:55:04.003109 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7558): Terminated: ok {rc=0} 12:55:04.090091 bus /gobi_0: Setting Powered False 12:55:05.193669 bus /gobi_0: Setting Powered False 12:55:06.303693 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7556): Process ended prematurely: osmo-stp_10.42.42.5(pid=7556) [trial-2360↪gprs:sysmo+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7556)]