Failed
gprs:trx-b200+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-b200+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=9026): Process ended prematurely: osmo-stp_10.42.42.5(pid=9026) [trial-2360↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9026)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-b200+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 13:12:21.151393 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:12:21.163381 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 13:12:21.321855 tst ping_idle_ping.py: using LAC 21691 13:12:21.440407 tst ping_idle_ping.py: using RAC 16 13:12:21.560437 tst ping_idle_ping.py: using CellId 21691 13:12:21.678789 tst ping_idle_ping.py: using BVCI 21692 13:12:21.702057 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:12:21.712872 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:12:21.723599 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:12:21.734338 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:12:21.744932 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:12:21.755685 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:12:21.766524 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 13:12:21.777340 tst gprs:trx-b200+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 13:12:22.070451 tst ping_idle_ping.py:24: start network... 13:12:22.206113 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:12:22.718269 run create_hlr_db(pid=9020): Launched 13:12:22.907354 bus /gobi_6: Setting Powered False 13:12:23.926324 run create_hlr_db(pid=9020): Terminated: ok {rc=0} 13:12:24.332577 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9022): Launched 13:12:24.636799 run osmo-hlr_10.42.42.2(pid=9023): Launched 13:12:24.752320 run osmo-stp_10.42.42.5: Starting osmo-stp 13:12:25.286853 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9025): Launched 13:12:25.589865 run osmo-stp_10.42.42.5(pid=9026): Launched 13:12:25.700160 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:12:26.226285 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9028): Launched 13:12:26.333643 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:12:26.597714 run patchelf(pid=9029): Launched 13:12:26.775091 run osmo-stp_10.42.42.5(pid=9026): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9026)] 13:12:26.904651 run osmo-stp_10.42.42.5(pid=9026): stdout: | (launched: 2022-12-09_13:12:25.439994) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:12:27.034438 run osmo-stp_10.42.42.5(pid=9026): stderr: | �[0;m�[38;5;43m20221209131225608 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209131225608 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209131225609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209131225609 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209131225610 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209131225610 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209131225610 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:12:27.159872 run osmo-stp_10.42.42.5(pid=9026): stdout: | (launched: 2022-12-09_13:12:25.439994) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:12:27.284562 run osmo-stp_10.42.42.5(pid=9026): stderr: | �[0;m�[38;5;43m20221209131225608 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209131225608 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209131225609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209131225609 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209131225610 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209131225610 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209131225610 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:12:27.428735 run patchelf(pid=9029): Terminating (SIGINT) 13:12:27.597559 run patchelf(pid=9029): Terminated: ok {rc=0} 13:12:27.628337 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=9026): Process ended prematurely: osmo-stp_10.42.42.5(pid=9026) [trial-2360↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9026)] [trial-2360↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 13:12:27.636770 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 13:12:27.695958 run osmo-hlr_10.42.42.2(pid=9023): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=9023)] 13:12:27.744217 run osmo-hlr_10.42.42.2(pid=9023): stdout: | (launched: 2022-12-09_13:12:24.486898) 13:12:27.793353 run osmo-hlr_10.42.42.2(pid=9023): stderr: | �[0;m�[1;31m20221209131224663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209131224663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209131224663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209131224663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209131224663 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209131224664 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209131224676 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-b200+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209131224686 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209131224687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209131224687 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:12:27.834998 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9022): Terminating (SIGTERM) 13:12:27.874483 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9025): Terminating (SIGTERM) 13:12:27.913632 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9028): Terminating (SIGTERM) 13:12:27.922694 --- ParallelTerminationStrategy: PID 9022 died... 13:12:27.975268 run pcap-recorder_any(filters='host 10.42.42.2')(pid=9022): Terminated: ok {rc=0} 13:12:27.984724 --- ParallelTerminationStrategy: PID 9025 died... 13:12:28.037029 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=9025): Terminated: ok {rc=0} 13:12:28.046427 --- ParallelTerminationStrategy: PID 9028 died... 13:12:28.098662 run pcap-recorder_any(filters='host 10.42.42.6')(pid=9028): Terminated: ok {rc=0} 13:12:28.180877 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=9026): Process ended prematurely: osmo-stp_10.42.42.5(pid=9026) [trial-2360↪gprs:trx-b200+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=9026)]