Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=10374): Process ended prematurely: osmo-stp_10.42.42.5(pid=10374) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10374)]
Standard Output
---------------------------------------------- trial-2360 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 13:27:40.104669 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.116005 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 13:27:40.271283 tst cs_paging_gprs_active.py: using LAC 21773 13:27:40.389091 tst cs_paging_gprs_active.py: using RAC 98 13:27:40.508414 tst cs_paging_gprs_active.py: using CellId 21773 13:27:40.628458 tst cs_paging_gprs_active.py: using BVCI 21774 13:27:40.651697 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.662570 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.673243 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.684367 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.695218 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.706061 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.716911 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.727646 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 13:27:40.738542 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:27:40.860152 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 13:27:41.138921 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 13:27:41.265330 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:27:41.579745 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10364): Launched 13:27:41.840601 run iperf3-srv_10.42.42.10(pid=10365): Launched 13:27:42.024928 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 13:27:42.151048 run iperf3-srv_10.42.42.10: Starting iperf3-srv 13:27:42.463488 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10366): Launched 13:27:42.722990 run iperf3-srv_10.42.42.10(pid=10367): Launched 13:27:42.907221 tst cs_paging_gprs_active.py:38: start network... 13:27:43.032536 run osmo-hlr_10.42.42.2: Starting osmo-hlr 13:27:43.517434 run create_hlr_db(pid=10368): Launched 13:27:43.691192 bus /gobi_6: Setting Powered False 13:27:44.714199 run create_hlr_db(pid=10368): Terminated: ok {rc=0} 13:27:45.144329 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10370): Launched 13:27:45.469862 run osmo-hlr_10.42.42.2(pid=10371): Launched 13:27:45.592838 run osmo-stp_10.42.42.5: Starting osmo-stp 13:27:46.198840 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10373): Launched 13:27:46.644241 run osmo-stp_10.42.42.5(pid=10374): Launched 13:27:46.935140 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 13:27:47.622121 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10376): Launched 13:27:47.730224 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 13:27:48.001120 run patchelf(pid=10377): Launched 13:27:48.178408 run osmo-stp_10.42.42.5(pid=10374): ERR: Terminated: ERROR {rc=1} [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10374)] 13:27:48.307921 run osmo-stp_10.42.42.5(pid=10374): stdout: | (launched: 2022-12-09_13:27:46.407502) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:48.438093 run osmo-stp_10.42.42.5(pid=10374): stderr: | �[0;m�[38;5;43m20221209132746767 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132746768 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132746769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132746771 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132746774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132746777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132746777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:48.563471 run osmo-stp_10.42.42.5(pid=10374): stdout: | (launched: 2022-12-09_13:27:46.407502) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 13:27:48.687521 run osmo-stp_10.42.42.5(pid=10374): stderr: | �[0;m�[38;5;43m20221209132746767 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209132746768 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209132746769 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209132746771 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209132746774 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209132746777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209132746777 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 13:27:48.831573 run patchelf(pid=10377): Terminating (SIGINT) 13:27:49.000853 run patchelf(pid=10377): Terminated: ok {rc=0} 13:27:49.032087 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10374): Process ended prematurely: osmo-stp_10.42.42.5(pid=10374) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10374)] [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 13:27:49.041390 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 13:27:49.101079 run osmo-hlr_10.42.42.2(pid=10371): ERR: Terminated: ERROR {rc=237} [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10371)] 13:27:49.149737 run osmo-hlr_10.42.42.2(pid=10371): stdout: | (launched: 2022-12-09_13:27:45.310455) 13:27:49.199065 run osmo-hlr_10.42.42.2(pid=10371): stderr: | �[0;m�[1;31m20221209132745508 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209132745508 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209132745508 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209132745508 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209132745508 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209132745508 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209132745521 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2360/run.2022-12-09_12-45-57/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209132745529 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209132745530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209132745530 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 13:27:49.241234 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10364): Terminating (SIGTERM) 13:27:49.280693 run iperf3-srv_10.42.42.10(pid=10365): Terminating (SIGTERM) 13:27:49.320222 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10366): Terminating (SIGTERM) 13:27:49.359698 run iperf3-srv_10.42.42.10(pid=10367): Terminating (SIGTERM) 13:27:49.399355 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10370): Terminating (SIGTERM) 13:27:49.438797 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10373): Terminating (SIGTERM) 13:27:49.478433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10376): Terminating (SIGTERM) 13:27:49.487650 --- ParallelTerminationStrategy: PID 10364 died... 13:27:49.540275 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10364): Terminated: ok {rc=0} 13:27:49.549924 --- ParallelTerminationStrategy: PID 10365 died... 13:27:49.602303 run iperf3-srv_10.42.42.10(pid=10365): Terminated {rc=256} 13:27:49.611773 --- ParallelTerminationStrategy: PID 10366 died... 13:27:49.665082 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10366): Terminated: ok {rc=0} 13:27:49.674606 --- ParallelTerminationStrategy: PID 10367 died... 13:27:49.727070 run iperf3-srv_10.42.42.10(pid=10367): Terminated {rc=256} 13:27:49.736603 --- ParallelTerminationStrategy: PID 10370 died... 13:27:49.790193 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10370): Terminated: ok {rc=0} 13:27:49.799756 --- ParallelTerminationStrategy: PID 10373 died... 13:27:49.852577 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10373): Terminated: ok {rc=0} 13:27:49.862232 --- ParallelTerminationStrategy: PID 10376 died... 13:27:49.914899 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10376): Terminated: ok {rc=0} 13:27:49.998281 bus /gobi_0: Setting Powered False 13:27:51.105122 bus /gobi_0: Setting Powered False 13:27:52.217282 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10374): Process ended prematurely: osmo-stp_10.42.42.5(pid=10374) [trial-2360↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10374)]