Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=26124): Process ended prematurely: osmo-stp_10.42.42.5(pid=26124) [trial-2362↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26124)]
Standard Output
---------------------------------------------- trial-2362 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:16:59.269837 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.281243 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:16:59.413663 tst cs_paging_gprs_active.py: using LAC 22511 17:16:59.543452 tst cs_paging_gprs_active.py: using RAC 71 17:16:59.673186 tst cs_paging_gprs_active.py: using CellId 22511 17:16:59.804713 tst cs_paging_gprs_active.py: using BVCI 22512 17:16:59.830197 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.841563 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.852429 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.863678 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.874807 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.885973 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.897312 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.908334 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:16:59.919958 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:17:00.035925 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:17:00.333979 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:17:00.473437 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:17:00.818318 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26111): Launched 17:17:01.143621 run iperf3-srv_10.42.42.10(pid=26112): Launched 17:17:01.350860 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:17:01.491322 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:17:01.866653 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26116): Launched 17:17:02.207050 run iperf3-srv_10.42.42.10(pid=26117): Launched 17:17:02.413504 tst cs_paging_gprs_active.py:38: start network... 17:17:02.555524 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:17:03.087175 run create_hlr_db(pid=26118): Launched 17:17:03.279178 bus /gobi_6: Setting Powered False 17:17:04.299776 run create_hlr_db(pid=26118): Terminated: ok {rc=0} 17:17:04.716864 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26120): Launched 17:17:05.029492 run osmo-hlr_10.42.42.2(pid=26121): Launched 17:17:05.142527 run osmo-stp_10.42.42.5: Starting osmo-stp 17:17:05.681651 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26123): Launched 17:17:05.993506 run osmo-stp_10.42.42.5(pid=26124): Launched 17:17:06.106359 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:17:06.646281 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26126): Launched 17:17:06.756311 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:17:07.027810 run patchelf(pid=26127): Launched 17:17:07.208746 run osmo-stp_10.42.42.5(pid=26124): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26124)] 17:17:07.340677 run osmo-stp_10.42.42.5(pid=26124): stdout: | (launched: 2022-12-09_17:17:05.838287) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:17:07.472884 run osmo-stp_10.42.42.5(pid=26124): stderr: | �[0;m�[38;5;43m20221209171706012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209171706012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209171706013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209171706013 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209171706013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209171706014 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209171706014 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:17:07.600483 run osmo-stp_10.42.42.5(pid=26124): stdout: | (launched: 2022-12-09_17:17:05.838287) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:17:07.727512 run osmo-stp_10.42.42.5(pid=26124): stderr: | �[0;m�[38;5;43m20221209171706012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209171706012 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209171706013 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209171706013 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209171706013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209171706014 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209171706014 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:17:07.875393 run patchelf(pid=26127): Terminating (SIGINT) 17:17:08.049194 run patchelf(pid=26127): Terminated: ok {rc=0} 17:17:08.080999 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=26124): Process ended prematurely: osmo-stp_10.42.42.5(pid=26124) [trial-2362↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26124)] [trial-2362↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:17:08.090434 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 17:17:08.151323 run osmo-hlr_10.42.42.2(pid=26121): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=26121)] 17:17:08.200850 run osmo-hlr_10.42.42.2(pid=26121): stdout: | (launched: 2022-12-09_17:17:04.873878) 17:17:08.251485 run osmo-hlr_10.42.42.2(pid=26121): stderr: | �[0;m�[1;31m20221209171705054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209171705054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209171705054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209171705054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209171705054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209171705054 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209171705105 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209171705115 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209171705116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209171705116 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:17:08.294371 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26111): Terminating (SIGTERM) 17:17:08.334059 run iperf3-srv_10.42.42.10(pid=26112): Terminating (SIGTERM) 17:17:08.374084 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26116): Terminating (SIGTERM) 17:17:08.414024 run iperf3-srv_10.42.42.10(pid=26117): Terminating (SIGTERM) 17:17:08.454083 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26120): Terminating (SIGTERM) 17:17:08.494095 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26123): Terminating (SIGTERM) 17:17:08.534183 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26126): Terminating (SIGTERM) 17:17:08.543462 --- ParallelTerminationStrategy: PID 26111 died... 17:17:08.597534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26111): Terminated: ok {rc=0} 17:17:08.607310 --- ParallelTerminationStrategy: PID 26112 died... 17:17:08.660586 run iperf3-srv_10.42.42.10(pid=26112): Terminated {rc=256} 17:17:08.670353 --- ParallelTerminationStrategy: PID 26116 died... 17:17:08.723362 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=26116): Terminated: ok {rc=0} 17:17:08.733147 --- ParallelTerminationStrategy: PID 26117 died... 17:17:08.785942 run iperf3-srv_10.42.42.10(pid=26117): Terminated {rc=256} 17:17:08.795661 --- ParallelTerminationStrategy: PID 26120 died... 17:17:08.849288 run pcap-recorder_any(filters='host 10.42.42.2')(pid=26120): Terminated: ok {rc=0} 17:17:08.858851 --- ParallelTerminationStrategy: PID 26123 died... 17:17:08.911942 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=26123): Terminated: ok {rc=0} 17:17:08.921651 --- ParallelTerminationStrategy: PID 26126 died... 17:17:08.975033 run pcap-recorder_any(filters='host 10.42.42.6')(pid=26126): Terminated: ok {rc=0} 17:17:09.059064 bus /gobi_0: Setting Powered False 17:17:10.166567 bus /gobi_0: Setting Powered False 17:17:11.278440 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=26124): Process ended prematurely: osmo-stp_10.42.42.5(pid=26124) [trial-2362↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=26124)]