Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=31024): Process ended prematurely: osmo-stp_10.42.42.5(pid=31024) [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31024)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:59:40.494766 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:40.506218 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:59:40.654038 tst cs_paging_gprs_active.py: using LAC 22737 17:59:40.782305 tst cs_paging_gprs_active.py: using RAC 42 17:59:40.906355 tst cs_paging_gprs_active.py: using CellId 22737 17:59:41.028253 tst cs_paging_gprs_active.py: using BVCI 22738 17:59:41.051786 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:41.062753 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:41.073515 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:41.084488 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:41.095350 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:41.106324 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:41.117434 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:41.128169 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:59:41.139329 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:59:41.260214 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:59:41.543355 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:59:41.671578 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:59:41.993393 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31014): Launched 17:59:42.258622 run iperf3-srv_10.42.42.10(pid=31015): Launched 17:59:42.445807 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:59:42.573785 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:59:42.892533 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31016): Launched 17:59:43.158474 run iperf3-srv_10.42.42.10(pid=31017): Launched 17:59:43.346532 tst cs_paging_gprs_active.py:38: start network... 17:59:43.474305 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:59:43.957350 run create_hlr_db(pid=31018): Launched 17:59:44.133707 bus /gobi_6: Setting Powered False 17:59:45.156646 run create_hlr_db(pid=31018): Terminated: ok {rc=0} 17:59:45.596127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31020): Launched 17:59:46.055811 run osmo-hlr_10.42.42.2(pid=31021): Launched 17:59:46.261233 run osmo-stp_10.42.42.5: Starting osmo-stp 17:59:46.827009 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31023): Launched 17:59:47.206626 run osmo-stp_10.42.42.5(pid=31024): Launched 17:59:47.352457 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:59:47.926813 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31026): Launched 17:59:48.043829 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:59:48.331868 run patchelf(pid=31027): Launched 17:59:48.527083 run osmo-stp_10.42.42.5(pid=31024): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31024)] 17:59:48.667947 run osmo-stp_10.42.42.5(pid=31024): stdout: | (launched: 2022-12-09_17:59:46.989143) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:59:48.807804 run osmo-stp_10.42.42.5(pid=31024): stderr: | �[0;m�[38;5;43m20221209175947328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209175947328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209175947328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209175947337 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209175947338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209175947338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209175947338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:59:48.943691 run osmo-stp_10.42.42.5(pid=31024): stdout: | (launched: 2022-12-09_17:59:46.989143) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:59:49.078527 run osmo-stp_10.42.42.5(pid=31024): stderr: | �[0;m�[38;5;43m20221209175947328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209175947328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209175947328 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209175947337 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209175947338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209175947338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209175947338 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:59:49.234931 run patchelf(pid=31027): Terminating (SIGINT) 17:59:49.420441 run patchelf(pid=31027): Terminated: ok {rc=0} 17:59:49.454448 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=31024): Process ended prematurely: osmo-stp_10.42.42.5(pid=31024) [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31024)] [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:59:49.464416 tst cs_paging_gprs_active.py:38: Test FAILED (9.0 sec) 17:59:49.528762 run osmo-hlr_10.42.42.2(pid=31021): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=31021)] 17:59:49.580830 run osmo-hlr_10.42.42.2(pid=31021): stdout: | (launched: 2022-12-09_17:59:45.763321) 17:59:49.633625 run osmo-hlr_10.42.42.2(pid=31021): stderr: | �[0;m�[1;31m20221209175946010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209175946010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209175946010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209175946010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209175946010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209175946010 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209175946031 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209175946041 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209175946041 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209175946041 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:59:49.678589 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31014): Terminating (SIGTERM) 17:59:49.720691 run iperf3-srv_10.42.42.10(pid=31015): Terminating (SIGTERM) 17:59:49.764793 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31016): Terminating (SIGTERM) 17:59:49.806938 run iperf3-srv_10.42.42.10(pid=31017): Terminating (SIGTERM) 17:59:49.849071 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31020): Terminating (SIGTERM) 17:59:49.891074 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31023): Terminating (SIGTERM) 17:59:49.933258 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31026): Terminating (SIGTERM) 17:59:49.943008 --- ParallelTerminationStrategy: PID 31014 died... 17:59:49.999534 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31014): Terminated: ok {rc=0} 17:59:50.009751 --- ParallelTerminationStrategy: PID 31015 died... 17:59:50.065909 run iperf3-srv_10.42.42.10(pid=31015): Terminated {rc=256} 17:59:50.076089 --- ParallelTerminationStrategy: PID 31016 died... 17:59:50.132453 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=31016): Terminated: ok {rc=0} 17:59:50.142643 --- ParallelTerminationStrategy: PID 31017 died... 17:59:50.199021 run iperf3-srv_10.42.42.10(pid=31017): Terminated {rc=256} 17:59:50.209390 --- ParallelTerminationStrategy: PID 31020 died... 17:59:50.265604 run pcap-recorder_any(filters='host 10.42.42.2')(pid=31020): Terminated: ok {rc=0} 17:59:50.275842 --- ParallelTerminationStrategy: PID 31023 died... 17:59:50.331834 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=31023): Terminated: ok {rc=0} 17:59:50.341994 --- ParallelTerminationStrategy: PID 31026 died... 17:59:50.397750 run pcap-recorder_any(filters='host 10.42.42.6')(pid=31026): Terminated: ok {rc=0} 17:59:50.485674 bus /gobi_0: Setting Powered False 17:59:51.592941 bus /gobi_0: Setting Powered False 17:59:52.701482 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=31024): Process ended prematurely: osmo-stp_10.42.42.5(pid=31024) [trial-2362↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=31024)]