Skip to content
[Jenkins]Jenkins
log insign up

Failed

gprs:trx-lms.ping.py (from gprs_trx-lms)

Failing for the past 36 builds (Since #2327 )
Took 7 sec.

Stacktrace

osmo-stp_10.42.42.5(pid=30995): Process ended prematurely: osmo-stp_10.42.42.5(pid=30995) [trial-2362↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30995)]

Standard Output

----------------------------------------------
trial-2362 gprs:trx-lms ping.py
----------------------------------------------
17:59:22.987759 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
17:59:22.999709 tst                     gprs:trx-lms: Using 1 x bts (candidates: 1)
17:59:23.143531 tst                          ping.py: using LAC 22735
17:59:23.271748 tst                          ping.py: using RAC 40
17:59:23.390835 tst                          ping.py: using CellId 22735
17:59:23.506761 tst                          ping.py: using BVCI 22736
17:59:23.529736 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
17:59:23.540238 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
17:59:23.550763 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
17:59:23.561577 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
17:59:23.572141 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
17:59:23.582834 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
17:59:23.593728 tst                     gprs:trx-lms: Using 1 x ip_address (candidates: 9)
17:59:23.604343 tst                     gprs:trx-lms: Using 1 x modem (candidates: 4)
17:59:23.896169 tst                       ping.py:19: start network...
17:59:24.029322 run              osmo-hlr_10.42.42.2: Starting osmo-hlr
17:59:24.531213 run         create_hlr_db(pid=30989): Launched
17:59:24.705128 bus                          /gobi_6: Setting Powered False
17:59:25.726245 run         create_hlr_db(pid=30989): Terminated: ok {rc=0}
17:59:26.154485 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30991): Launched
17:59:26.474060 run   osmo-hlr_10.42.42.2(pid=30992): Launched
17:59:26.592043 run              osmo-stp_10.42.42.5: Starting osmo-stp
17:59:27.155381 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30994): Launched
17:59:27.476545 run   osmo-stp_10.42.42.5(pid=30995): Launched
17:59:27.593616 run             osmo-ggsn_10.42.42.6: Starting osmo-ggsn
17:59:28.154916 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30997): Launched
17:59:28.269031 run             osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn
17:59:28.549317 run              patchelf(pid=30998): Launched
17:59:28.737494 run   osmo-stp_10.42.42.5(pid=30995): ERR: Terminated: ERROR {rc=1}  [trial-2362↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30995)]
17:59:28.875803 run   osmo-stp_10.42.42.5(pid=30995): stdout: 
| (launched: 2022-12-09_17:59:27.318692)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:59:29.014394 run   osmo-stp_10.42.42.5(pid=30995): stderr: 
| �[0;m�[38;5;43m20221209175927514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209175927514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209175927514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209175927515 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209175927515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209175927515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209175927515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:59:29.147839 run   osmo-stp_10.42.42.5(pid=30995): stdout: 
| (launched: 2022-12-09_17:59:27.318692)
| Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org>
| Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy
| License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html>
| This is free software: you are free to change and redistribute it.
| There is NO WARRANTY, to the extent permitted by law.
| 
| Free Software lives by contribution.  If you use this, please contribute!
|  
17:59:29.279305 run   osmo-stp_10.42.42.5(pid=30995): stderr: 
| �[0;m�[38;5;43m20221209175927514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189)
| �[0;m�[38;5;43m20221209175927514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207)
| �[0;m�[38;5;43m20221209175927514 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235)
| �[0;m20221209175927515 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822)
| % Unable to bind xUA server to IP(s)
| 20221209175927515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935)
| 20221209175927515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946)
| 20221209175927515 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99)
| Error binding VTY port
| : Address already in use 
17:59:29.432654 run              patchelf(pid=30998): Terminating (SIGINT)
17:59:29.613530 run              patchelf(pid=30998): Terminated: ok {rc=0}
17:59:29.646303 tst                       ping.py:22: ERR: Error: osmo-stp_10.42.42.5(pid=30995): Process ended prematurely: osmo-stp_10.42.42.5(pid=30995) [trial-2362↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30995)]  [trial-2362↪gprs:trx-lms↪ping.py:22]
17:59:29.655809 tst                       ping.py:22: Test FAILED (6.7 sec)
17:59:29.719355 run   osmo-hlr_10.42.42.2(pid=30992): ERR: Terminated: ERROR {rc=237}  [trial-2362↪gprs:trx-lms↪ping.py↪ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30992)]
17:59:29.771295 run   osmo-hlr_10.42.42.2(pid=30992): stdout: 
| (launched: 2022-12-09_17:59:26.316917) 
17:59:29.823967 run   osmo-hlr_10.42.42.2(pid=30992): stderr: 
| �[0;m�[1;31m20221209175926518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579)
| �[0;m�[1;31m20221209175926518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579)
| �[0;m�[1;31m20221209175926518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579)
| �[0;m�[1;31m20221209175926518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579)
| �[0;m�[1;31m20221209175926518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579)
| �[0;m�[1;31m20221209175926518 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596)
| �[0;m�[1;31m20221209175926530 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-lms/ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636)
| �[0;m20221209175926539 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935)
| 20221209175926540 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946)
| 20221209175926540 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 
17:59:29.868814 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30991): Terminating (SIGTERM)
17:59:29.911315 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30994): Terminating (SIGTERM)
17:59:29.953843 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30997): Terminating (SIGTERM)
17:59:29.963697 ---      ParallelTerminationStrategy: PID 30991 died...
17:59:30.020623 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30991): Terminated: ok {rc=0}
17:59:30.031011 ---      ParallelTerminationStrategy: PID 30994 died...
17:59:30.087375 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30994): Terminated: ok {rc=0}
17:59:30.098017 ---      ParallelTerminationStrategy: PID 30997 died...
17:59:30.154414 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30997): Terminated: ok {rc=0}
17:59:30.242788 bus                          /gobi_6: Setting Powered False

Standard Error

Traceback (most recent call last):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run
    self.path)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file
    spec.loader.exec_module( importlib.util.module_from_spec(spec) )
  File "<frozen importlib._bootstrap_external>", line 728, in exec_module
  File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping.py", line 22, in <module>
    ggsn.start()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start
    util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf'))
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath
    proc.launch_sync()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync
    raise e
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync
    self.wait()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait
    MainLoop.wait(self.terminated, timeout=timeout)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait
    if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep):
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise
    self.poll(may_block=True)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll
    self.deferred_handling.handle_queue()
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue
    handler(*args, **kwargs)
  File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll
    raise log_module.Error('Process ended prematurely: %s' % proc.name())
osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30995): Process ended prematurely: osmo-stp_10.42.42.5(pid=30995) [trial-2362↪gprs:trx-lms↪ping.py:22↪ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30995)]