Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=30132): Process ended prematurely: osmo-stp_10.42.42.5(pid=30132) [trial-2362↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30132)]
Standard Output
---------------------------------------------- trial-2362 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 17:50:44.897339 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:44.908528 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 17:50:45.056287 tst cs_paging_gprs_active.py: using LAC 22690 17:50:45.184088 tst cs_paging_gprs_active.py: using RAC 250 17:50:45.314412 tst cs_paging_gprs_active.py: using CellId 22690 17:50:45.442397 tst cs_paging_gprs_active.py: using BVCI 22691 17:50:45.467483 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:45.478846 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:45.489933 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:45.501499 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:45.512538 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:45.523718 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:45.534978 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:45.546055 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 17:50:45.557437 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:50:45.674154 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 17:50:45.987022 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 17:50:46.129437 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:50:46.493525 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30122): Launched 17:50:46.794393 run iperf3-srv_10.42.42.10(pid=30123): Launched 17:50:46.988130 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 17:50:47.121324 run iperf3-srv_10.42.42.10: Starting iperf3-srv 17:50:47.442513 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30124): Launched 17:50:47.707546 run iperf3-srv_10.42.42.10(pid=30125): Launched 17:50:47.894252 tst cs_paging_gprs_active.py:38: start network... 17:50:48.021815 run osmo-hlr_10.42.42.2: Starting osmo-hlr 17:50:48.504599 run create_hlr_db(pid=30126): Launched 17:50:48.680630 bus /gobi_6: Setting Powered False 17:50:49.701929 run create_hlr_db(pid=30126): Terminated: ok {rc=0} 17:50:50.137929 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30128): Launched 17:50:50.467711 run osmo-hlr_10.42.42.2(pid=30129): Launched 17:50:50.587878 run osmo-stp_10.42.42.5: Starting osmo-stp 17:50:51.158243 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30131): Launched 17:50:51.487802 run osmo-stp_10.42.42.5(pid=30132): Launched 17:50:51.606700 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 17:50:52.177447 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30134): Launched 17:50:52.294195 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 17:50:52.581163 run patchelf(pid=30135): Launched 17:50:52.772845 run osmo-stp_10.42.42.5(pid=30132): ERR: Terminated: ERROR {rc=1} [trial-2362↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30132)] 17:50:52.912289 run osmo-stp_10.42.42.5(pid=30132): stdout: | (launched: 2022-12-09_17:50:51.325308) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:50:53.052428 run osmo-stp_10.42.42.5(pid=30132): stderr: | �[0;m�[38;5;43m20221209175051518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209175051518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209175051518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209175051519 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209175051519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209175051519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209175051519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:50:53.187290 run osmo-stp_10.42.42.5(pid=30132): stdout: | (launched: 2022-12-09_17:50:51.325308) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 17:50:53.321489 run osmo-stp_10.42.42.5(pid=30132): stderr: | �[0;m�[38;5;43m20221209175051518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209175051518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209175051518 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209175051519 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209175051519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209175051519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209175051519 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 17:50:53.478068 run patchelf(pid=30135): Terminating (SIGINT) 17:50:53.662439 run patchelf(pid=30135): Terminated: ok {rc=0} 17:50:53.696250 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=30132): Process ended prematurely: osmo-stp_10.42.42.5(pid=30132) [trial-2362↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30132)] [trial-2362↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 17:50:53.706286 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 17:50:53.769492 run osmo-hlr_10.42.42.2(pid=30129): ERR: Terminated: ERROR {rc=237} [trial-2362↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=30129)] 17:50:53.820865 run osmo-hlr_10.42.42.2(pid=30129): stdout: | (launched: 2022-12-09_17:50:50.305739) 17:50:53.872910 run osmo-hlr_10.42.42.2(pid=30129): stderr: | �[0;m�[1;31m20221209175050504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209175050504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209175050504 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209175050505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209175050505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209175050505 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209175050518 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2362/run.2022-12-09_17-10-07/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209175050527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209175050527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209175050527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 17:50:53.917414 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30122): Terminating (SIGTERM) 17:50:53.959266 run iperf3-srv_10.42.42.10(pid=30123): Terminating (SIGTERM) 17:50:54.001221 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30124): Terminating (SIGTERM) 17:50:54.043036 run iperf3-srv_10.42.42.10(pid=30125): Terminating (SIGTERM) 17:50:54.085052 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30128): Terminating (SIGTERM) 17:50:54.127011 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30131): Terminating (SIGTERM) 17:50:54.168814 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30134): Terminating (SIGTERM) 17:50:54.178638 --- ParallelTerminationStrategy: PID 30122 died... 17:50:54.234529 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30122): Terminated: ok {rc=0} 17:50:54.245004 --- ParallelTerminationStrategy: PID 30123 died... 17:50:54.300718 run iperf3-srv_10.42.42.10(pid=30123): Terminated {rc=256} 17:50:54.310787 --- ParallelTerminationStrategy: PID 30124 died... 17:50:54.366243 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=30124): Terminated: ok {rc=0} 17:50:54.376215 --- ParallelTerminationStrategy: PID 30125 died... 17:50:54.431561 run iperf3-srv_10.42.42.10(pid=30125): Terminated {rc=256} 17:50:54.441670 --- ParallelTerminationStrategy: PID 30128 died... 17:50:54.497105 run pcap-recorder_any(filters='host 10.42.42.2')(pid=30128): Terminated: ok {rc=0} 17:50:54.507146 --- ParallelTerminationStrategy: PID 30131 died... 17:50:54.562588 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=30131): Terminated: ok {rc=0} 17:50:54.572543 --- ParallelTerminationStrategy: PID 30134 died... 17:50:54.627890 run pcap-recorder_any(filters='host 10.42.42.6')(pid=30134): Terminated: ok {rc=0} 17:50:54.715136 bus /gobi_0: Setting Powered False 17:50:55.819038 bus /gobi_0: Setting Powered False 17:50:56.929669 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=30132): Process ended prematurely: osmo-stp_10.42.42.5(pid=30132) [trial-2362↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=30132)]