Failed
gprs:sysmo+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=2355): Process ended prematurely: osmo-stp_10.42.42.5(pid=2355) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2355)]
Standard Output
---------------------------------------------- trial-2363 gprs:sysmo+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 18:44:07.316677 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.327790 tst gprs:sysmo+mod-bts0-egprs: Using 1 x bts (candidates: 1) 18:44:07.457525 tst cs_paging_gprs_active.py: using LAC 22972 18:44:07.581803 tst cs_paging_gprs_active.py: using RAC 22 18:44:07.703399 tst cs_paging_gprs_active.py: using CellId 22972 18:44:07.825619 tst cs_paging_gprs_active.py: using BVCI 22973 18:44:07.848659 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.859709 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.870488 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.881413 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.892144 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.903017 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.914105 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.924875 tst gprs:sysmo+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 18:44:07.935955 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:44:08.054279 tst gprs:sysmo+mod-bts0-egprs: Using 1 x modem (candidates: 4) 18:44:08.347229 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 18:44:08.482999 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:44:08.816141 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2345): Launched 18:44:09.092708 run iperf3-srv_10.42.42.10(pid=2346): Launched 18:44:09.291156 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 18:44:09.426281 run iperf3-srv_10.42.42.10: Starting iperf3-srv 18:44:09.758669 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2347): Launched 18:44:10.034975 run iperf3-srv_10.42.42.10(pid=2348): Launched 18:44:10.233026 tst cs_paging_gprs_active.py:38: start network... 18:44:10.367830 run osmo-hlr_10.42.42.2: Starting osmo-hlr 18:44:10.874014 run create_hlr_db(pid=2349): Launched 18:44:11.060262 bus /gobi_6: Setting Powered False 18:44:12.080596 run create_hlr_db(pid=2349): Terminated: ok {rc=0} 18:44:12.484501 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2351): Launched 18:44:12.786558 run osmo-hlr_10.42.42.2(pid=2352): Launched 18:44:12.901755 run osmo-stp_10.42.42.5: Starting osmo-stp 18:44:13.422166 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2354): Launched 18:44:13.721687 run osmo-stp_10.42.42.5(pid=2355): Launched 18:44:13.830736 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 18:44:14.352568 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2357): Launched 18:44:14.459921 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 18:44:14.719924 run patchelf(pid=2358): Launched 18:44:14.894924 run osmo-stp_10.42.42.5(pid=2355): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2355)] 18:44:15.022654 run osmo-stp_10.42.42.5(pid=2355): stdout: | (launched: 2022-12-09_18:44:13.574211) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:44:15.150984 run osmo-stp_10.42.42.5(pid=2355): stderr: | �[0;m�[38;5;43m20221209184413745 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184413746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184413746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184413746 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184413747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184413747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184413747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:44:15.274867 run osmo-stp_10.42.42.5(pid=2355): stdout: | (launched: 2022-12-09_18:44:13.574211) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 18:44:15.397799 run osmo-stp_10.42.42.5(pid=2355): stderr: | �[0;m�[38;5;43m20221209184413745 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209184413746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209184413746 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209184413746 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209184413747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209184413747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209184413747 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 18:44:15.540493 run patchelf(pid=2358): Terminating (SIGINT) 18:44:15.708032 run patchelf(pid=2358): Terminated: ok {rc=0} 18:44:15.738885 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2355): Process ended prematurely: osmo-stp_10.42.42.5(pid=2355) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2355)] [trial-2363↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 18:44:15.747998 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 18:44:15.806724 run osmo-hlr_10.42.42.2(pid=2352): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2352)] 18:44:15.858695 run osmo-hlr_10.42.42.2(pid=2352): stdout: | (launched: 2022-12-09_18:44:12.636882) 18:44:15.914231 run osmo-hlr_10.42.42.2(pid=2352): stderr: | �[0;m�[1;31m20221209184412815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209184412815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209184412815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209184412815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209184412815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209184412815 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209184412826 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:sysmo+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209184412834 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209184412835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209184412835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 18:44:15.956190 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2345): Terminating (SIGTERM) 18:44:15.996935 run iperf3-srv_10.42.42.10(pid=2346): Terminating (SIGTERM) 18:44:16.040210 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2347): Terminating (SIGTERM) 18:44:16.082581 run iperf3-srv_10.42.42.10(pid=2348): Terminating (SIGTERM) 18:44:16.124108 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2351): Terminating (SIGTERM) 18:44:16.166214 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2354): Terminating (SIGTERM) 18:44:16.207338 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2357): Terminating (SIGTERM) 18:44:16.217869 --- ParallelTerminationStrategy: PID 2345 died... 18:44:16.270967 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2345): Terminated: ok {rc=0} 18:44:16.280892 --- ParallelTerminationStrategy: PID 2346 died... 18:44:16.333433 run iperf3-srv_10.42.42.10(pid=2346): Terminated {rc=256} 18:44:16.343174 --- ParallelTerminationStrategy: PID 2347 died... 18:44:16.395656 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2347): Terminated: ok {rc=0} 18:44:16.405413 --- ParallelTerminationStrategy: PID 2348 died... 18:44:16.458430 run iperf3-srv_10.42.42.10(pid=2348): Terminated {rc=256} 18:44:16.468259 --- ParallelTerminationStrategy: PID 2351 died... 18:44:16.520667 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2351): Terminated: ok {rc=0} 18:44:16.530602 --- ParallelTerminationStrategy: PID 2354 died... 18:44:16.583565 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2354): Terminated: ok {rc=0} 18:44:16.593662 --- ParallelTerminationStrategy: PID 2357 died... 18:44:16.646418 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2357): Terminated: ok {rc=0} 18:44:16.742001 bus /gobi_0: Setting Powered False 18:44:17.845407 bus /gobi_0: Setting Powered False 18:44:18.950778 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2355): Process ended prematurely: osmo-stp_10.42.42.5(pid=2355) [trial-2363↪gprs:sysmo+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2355)]