Failed
gprs:trx-b200+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-b200+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=3773): Process ended prematurely: osmo-stp_10.42.42.5(pid=3773) [trial-2363↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3773)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-b200+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:00:28.109840 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.120424 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:00:28.258227 tst cs_paging_gprs_active.py: using LAC 23060 19:00:28.386683 tst cs_paging_gprs_active.py: using RAC 110 19:00:28.514527 tst cs_paging_gprs_active.py: using CellId 23060 19:00:28.642831 tst cs_paging_gprs_active.py: using BVCI 23061 19:00:28.668461 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.679988 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.691283 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.702797 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.713894 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.725102 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.737349 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.748401 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:00:28.760003 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:00:28.882135 tst gprs:trx-b200+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:00:29.179313 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:00:29.318613 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:00:29.659598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3763): Launched 19:00:29.943476 run iperf3-srv_10.42.42.10(pid=3764): Launched 19:00:30.146215 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:00:30.284153 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:00:30.624800 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3765): Launched 19:00:30.910190 run iperf3-srv_10.42.42.10(pid=3766): Launched 19:00:31.117273 tst cs_paging_gprs_active.py:38: start network... 19:00:31.259222 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:00:31.898765 run create_hlr_db(pid=3767): Launched 19:00:32.095865 bus /gobi_6: Setting Powered False 19:00:33.110737 run create_hlr_db(pid=3767): Terminated: ok {rc=0} 19:00:33.524538 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3769): Launched 19:00:33.832039 run osmo-hlr_10.42.42.2(pid=3770): Launched 19:00:33.949284 run osmo-stp_10.42.42.5: Starting osmo-stp 19:00:34.483420 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3772): Launched 19:00:34.791170 run osmo-stp_10.42.42.5(pid=3773): Launched 19:00:34.903446 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:00:35.439717 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3775): Launched 19:00:35.549136 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:00:35.817505 run patchelf(pid=3776): Launched 19:00:35.997205 run osmo-stp_10.42.42.5(pid=3773): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3773)] 19:00:36.128303 run osmo-stp_10.42.42.5(pid=3773): stdout: | (launched: 2022-12-09_19:00:34.639902) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:00:36.260418 run osmo-stp_10.42.42.5(pid=3773): stderr: | �[0;m�[38;5;43m20221209190034813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209190034813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209190034813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209190034814 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209190034814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209190034814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209190034814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:00:36.387874 run osmo-stp_10.42.42.5(pid=3773): stdout: | (launched: 2022-12-09_19:00:34.639902) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:00:36.513464 run osmo-stp_10.42.42.5(pid=3773): stderr: | �[0;m�[38;5;43m20221209190034813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209190034813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209190034813 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209190034814 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209190034814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209190034814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209190034814 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:00:36.659806 run patchelf(pid=3776): Terminating (SIGINT) 19:00:36.831441 run patchelf(pid=3776): Terminated: ok {rc=0} 19:00:36.863096 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=3773): Process ended prematurely: osmo-stp_10.42.42.5(pid=3773) [trial-2363↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3773)] [trial-2363↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:00:36.872264 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 19:00:36.931831 run osmo-hlr_10.42.42.2(pid=3770): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=3770)] 19:00:36.980138 run osmo-hlr_10.42.42.2(pid=3770): stdout: | (launched: 2022-12-09_19:00:33.681762) 19:00:37.029097 run osmo-hlr_10.42.42.2(pid=3770): stderr: | �[0;m�[1;31m20221209190033858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209190033858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209190033858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209190033858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209190033858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209190033858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209190033871 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-b200+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209190033880 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209190033880 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209190033880 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:00:37.070619 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3763): Terminating (SIGTERM) 19:00:37.109732 run iperf3-srv_10.42.42.10(pid=3764): Terminating (SIGTERM) 19:00:37.148857 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3765): Terminating (SIGTERM) 19:00:37.187817 run iperf3-srv_10.42.42.10(pid=3766): Terminating (SIGTERM) 19:00:37.226920 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3769): Terminating (SIGTERM) 19:00:37.266173 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3772): Terminating (SIGTERM) 19:00:37.305424 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3775): Terminating (SIGTERM) 19:00:37.314406 --- ParallelTerminationStrategy: PID 3763 died... 19:00:37.366647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3763): Terminated: ok {rc=0} 19:00:37.376021 --- ParallelTerminationStrategy: PID 3764 died... 19:00:37.427860 run iperf3-srv_10.42.42.10(pid=3764): Terminated {rc=256} 19:00:37.437226 --- ParallelTerminationStrategy: PID 3765 died... 19:00:37.489270 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=3765): Terminated: ok {rc=0} 19:00:37.498669 --- ParallelTerminationStrategy: PID 3766 died... 19:00:37.550621 run iperf3-srv_10.42.42.10(pid=3766): Terminated {rc=256} 19:00:37.559910 --- ParallelTerminationStrategy: PID 3769 died... 19:00:37.612053 run pcap-recorder_any(filters='host 10.42.42.2')(pid=3769): Terminated: ok {rc=0} 19:00:37.621841 --- ParallelTerminationStrategy: PID 3772 died... 19:00:37.674130 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=3772): Terminated: ok {rc=0} 19:00:37.683563 --- ParallelTerminationStrategy: PID 3775 died... 19:00:37.735607 run pcap-recorder_any(filters='host 10.42.42.6')(pid=3775): Terminated: ok {rc=0} 19:00:37.823470 bus /gobi_0: Setting Powered False 19:00:38.925427 bus /gobi_0: Setting Powered False 19:00:40.035726 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=3773): Process ended prematurely: osmo-stp_10.42.42.5(pid=3773) [trial-2363↪gprs:trx-b200+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=3773)]