Failed
gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=7357): Process ended prematurely: osmo-stp_10.42.42.5(pid=7357) [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7357)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 19:36:31.573411 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:31.585779 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 19:36:31.782591 tst cs_paging_gprs_active.py: using LAC 23250 19:36:31.911670 tst cs_paging_gprs_active.py: using RAC 45 19:36:32.037786 tst cs_paging_gprs_active.py: using CellId 23250 19:36:32.164907 tst cs_paging_gprs_active.py: using BVCI 23251 19:36:32.190759 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:32.202817 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:32.215299 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:32.227896 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:32.240506 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:32.253884 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:32.266400 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:32.278008 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 19:36:32.290465 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:36:32.409115 tst gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 19:36:32.703783 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:36:32.831981 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:36:33.148689 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7347): Launched 19:36:33.412720 run iperf3-srv_10.42.42.10(pid=7348): Launched 19:36:33.599570 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:36:33.731566 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:36:34.069648 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7349): Launched 19:36:34.352303 run iperf3-srv_10.42.42.10(pid=7350): Launched 19:36:34.553028 tst cs_paging_gprs_active.py:38: start network... 19:36:34.689191 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:36:35.202598 run create_hlr_db(pid=7351): Launched 19:36:35.391886 bus /gobi_6: Setting Powered False 19:36:36.413000 run create_hlr_db(pid=7351): Terminated: ok {rc=0} 19:36:36.846232 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7353): Launched 19:36:37.172215 run osmo-hlr_10.42.42.2(pid=7354): Launched 19:36:37.290561 run osmo-stp_10.42.42.5: Starting osmo-stp 19:36:37.856254 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7356): Launched 19:36:38.182871 run osmo-stp_10.42.42.5(pid=7357): Launched 19:36:38.301053 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:36:38.868400 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7359): Launched 19:36:38.985009 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:36:39.277363 run patchelf(pid=7360): Launched 19:36:39.468261 run osmo-stp_10.42.42.5(pid=7357): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7357)] 19:36:39.607346 run osmo-stp_10.42.42.5(pid=7357): stdout: | (launched: 2022-12-09_19:36:38.021375) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:36:39.747004 run osmo-stp_10.42.42.5(pid=7357): stderr: | �[0;m�[38;5;43m20221209193638209 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209193638210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209193638210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209193638210 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209193638211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209193638211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209193638211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:36:39.881260 run osmo-stp_10.42.42.5(pid=7357): stdout: | (launched: 2022-12-09_19:36:38.021375) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:36:40.014738 run osmo-stp_10.42.42.5(pid=7357): stderr: | �[0;m�[38;5;43m20221209193638209 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209193638210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209193638210 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209193638210 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209193638211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209193638211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209193638211 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:36:40.169915 run patchelf(pid=7360): Terminating (SIGINT) 19:36:40.352636 run patchelf(pid=7360): Terminated: ok {rc=0} 19:36:40.386632 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7357): Process ended prematurely: osmo-stp_10.42.42.5(pid=7357) [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7357)] [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 19:36:40.396736 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 19:36:40.459571 run osmo-hlr_10.42.42.2(pid=7354): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7354)] 19:36:40.510340 run osmo-hlr_10.42.42.2(pid=7354): stdout: | (launched: 2022-12-09_19:36:37.011351) 19:36:40.561737 run osmo-hlr_10.42.42.2(pid=7354): stderr: | �[0;m�[1;31m20221209193637207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209193637207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209193637207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209193637207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209193637207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209193637207 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209193637220 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209193637228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209193637228 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209193637229 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:36:40.605358 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7347): Terminating (SIGTERM) 19:36:40.646740 run iperf3-srv_10.42.42.10(pid=7348): Terminating (SIGTERM) 19:36:40.688098 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7349): Terminating (SIGTERM) 19:36:40.729704 run iperf3-srv_10.42.42.10(pid=7350): Terminating (SIGTERM) 19:36:40.771199 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7353): Terminating (SIGTERM) 19:36:40.812839 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7356): Terminating (SIGTERM) 19:36:40.854220 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7359): Terminating (SIGTERM) 19:36:40.863904 --- ParallelTerminationStrategy: PID 7347 died... 19:36:40.919663 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7347): Terminated: ok {rc=0} 19:36:40.929805 --- ParallelTerminationStrategy: PID 7348 died... 19:36:40.985336 run iperf3-srv_10.42.42.10(pid=7348): Terminated {rc=256} 19:36:40.995229 --- ParallelTerminationStrategy: PID 7349 died... 19:36:41.050429 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7349): Terminated: ok {rc=0} 19:36:41.060702 --- ParallelTerminationStrategy: PID 7350 died... 19:36:41.115966 run iperf3-srv_10.42.42.10(pid=7350): Terminated {rc=256} 19:36:41.126078 --- ParallelTerminationStrategy: PID 7353 died... 19:36:41.181801 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7353): Terminated: ok {rc=0} 19:36:41.191716 --- ParallelTerminationStrategy: PID 7356 died... 19:36:41.247031 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7356): Terminated: ok {rc=0} 19:36:41.256933 --- ParallelTerminationStrategy: PID 7359 died... 19:36:41.312813 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7359): Terminated: ok {rc=0} 19:36:41.398818 bus /gobi_0: Setting Powered False 19:36:42.502301 bus /gobi_0: Setting Powered False 19:36:43.612061 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7357): Process ended prematurely: osmo-stp_10.42.42.5(pid=7357) [trial-2363↪gprs:trx-lms-limenet-micro+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7357)]