Failed
gprs:trx-lms-limenet-micro.cs_paging_gprs_active.py (from gprs_trx-lms-limenet-micro)
Stacktrace
osmo-stp_10.42.42.5(pid=7150): Process ended prematurely: osmo-stp_10.42.42.5(pid=7150) [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7150)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-lms-limenet-micro cs_paging_gprs_active.py ---------------------------------------------- 19:33:31.500673 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:31.512555 tst gprs:trx-lms-limenet-micro: Using 1 x bts (candidates: 1) 19:33:31.684290 tst cs_paging_gprs_active.py: using LAC 23235 19:33:31.828555 tst cs_paging_gprs_active.py: using RAC 30 19:33:31.952880 tst cs_paging_gprs_active.py: using CellId 23235 19:33:32.072847 tst cs_paging_gprs_active.py: using BVCI 23236 19:33:32.096995 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:32.108723 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:32.120377 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:32.133013 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:32.144648 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:32.156212 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:32.167620 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:32.178914 tst gprs:trx-lms-limenet-micro: Using 1 x ip_address (candidates: 9) 19:33:32.190334 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 19:33:32.307707 tst gprs:trx-lms-limenet-micro: Using 1 x modem (candidates: 4) 19:33:32.589069 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:33:32.716698 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:33:33.032580 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Launched 19:33:33.296222 run iperf3-srv_10.42.42.10(pid=7141): Launched 19:33:33.482218 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:33:33.609276 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:33:33.925295 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7142): Launched 19:33:34.186845 run iperf3-srv_10.42.42.10(pid=7143): Launched 19:33:34.372763 tst cs_paging_gprs_active.py:38: start network... 19:33:34.499555 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:33:34.986179 run create_hlr_db(pid=7144): Launched 19:33:35.161750 bus /sierra_2: Setting Powered False 19:33:36.183373 run create_hlr_db(pid=7144): Terminated: ok {rc=0} 19:33:36.617446 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7146): Launched 19:33:36.946147 run osmo-hlr_10.42.42.2(pid=7147): Launched 19:33:37.068005 run osmo-stp_10.42.42.5: Starting osmo-stp 19:33:37.637701 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7149): Launched 19:33:37.965680 run osmo-stp_10.42.42.5(pid=7150): Launched 19:33:38.083952 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:33:38.654200 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7152): Launched 19:33:38.771896 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:33:39.059386 run patchelf(pid=7153): Launched 19:33:39.250991 run osmo-stp_10.42.42.5(pid=7150): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7150)] 19:33:39.391491 run osmo-stp_10.42.42.5(pid=7150): stdout: | (launched: 2022-12-09_19:33:37.804112) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:33:39.531716 run osmo-stp_10.42.42.5(pid=7150): stderr: | �[0;m�[38;5;43m20221209193337994 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209193337995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209193337995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209193337995 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:33:39.667209 run osmo-stp_10.42.42.5(pid=7150): stdout: | (launched: 2022-12-09_19:33:37.804112) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:33:39.801326 run osmo-stp_10.42.42.5(pid=7150): stderr: | �[0;m�[38;5;43m20221209193337994 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209193337995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209193337995 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209193337995 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209193337996 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:33:39.957786 run patchelf(pid=7153): Terminating (SIGINT) 19:33:40.141527 run patchelf(pid=7153): Terminated: ok {rc=0} 19:33:40.175183 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7150): Process ended prematurely: osmo-stp_10.42.42.5(pid=7150) [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7150)] [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38] 19:33:40.185101 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 19:33:40.248227 run osmo-hlr_10.42.42.2(pid=7147): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7147)] 19:33:40.299210 run osmo-hlr_10.42.42.2(pid=7147): stdout: | (launched: 2022-12-09_19:33:36.784348) 19:33:40.350580 run osmo-hlr_10.42.42.2(pid=7147): stderr: | �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209193336982 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209193336995 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-lms-limenet-micro/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209193337003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209193337003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209193337003 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:33:40.394150 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Terminating (SIGTERM) 19:33:40.435503 run iperf3-srv_10.42.42.10(pid=7141): Terminating (SIGTERM) 19:33:40.476870 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7142): Terminating (SIGTERM) 19:33:40.518973 run iperf3-srv_10.42.42.10(pid=7143): Terminating (SIGTERM) 19:33:40.560266 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7146): Terminating (SIGTERM) 19:33:40.601649 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7149): Terminating (SIGTERM) 19:33:40.643449 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7152): Terminating (SIGTERM) 19:33:40.653277 --- ParallelTerminationStrategy: PID 7140 died... 19:33:40.709010 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7140): Terminated: ok {rc=0} 19:33:40.719076 --- ParallelTerminationStrategy: PID 7141 died... 19:33:40.774606 run iperf3-srv_10.42.42.10(pid=7141): Terminated {rc=256} 19:33:40.784627 --- ParallelTerminationStrategy: PID 7142 died... 19:33:40.840015 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7142): Terminated: ok {rc=0} 19:33:40.850020 --- ParallelTerminationStrategy: PID 7143 died... 19:33:40.905177 run iperf3-srv_10.42.42.10(pid=7143): Terminated {rc=256} 19:33:40.915243 --- ParallelTerminationStrategy: PID 7146 died... 19:33:40.970074 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7146): Terminated: ok {rc=0} 19:33:40.980429 --- ParallelTerminationStrategy: PID 7149 died... 19:33:41.035581 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7149): Terminated: ok {rc=0} 19:33:41.046038 --- ParallelTerminationStrategy: PID 7152 died... 19:33:41.101177 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7152): Terminated: ok {rc=0} 19:33:41.186716 bus /gobi_0: Setting Powered False 19:33:42.290649 bus /gobi_0: Setting Powered False 19:33:43.396720 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7150): Process ended prematurely: osmo-stp_10.42.42.5(pid=7150) [trial-2363↪gprs:trx-lms-limenet-micro↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7150)]