Failed
gprs:trx-umtrx+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=5772): Process ended prematurely: osmo-stp_10.42.42.5(pid=5772) [trial-2363↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5772)]
Standard Output
---------------------------------------------- trial-2363 gprs:trx-umtrx+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 19:17:46.037160 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.048710 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x bts (candidates: 1) 19:17:46.195612 tst cs_paging_gprs_active.py: using LAC 23151 19:17:46.319487 tst cs_paging_gprs_active.py: using RAC 201 19:17:46.446291 tst cs_paging_gprs_active.py: using CellId 23151 19:17:46.576811 tst cs_paging_gprs_active.py: using BVCI 23152 19:17:46.603589 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.615680 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.627815 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.640397 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.652711 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.664546 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.677086 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.689675 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 19:17:46.702107 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:17:46.852709 tst gprs:trx-umtrx+mod-bts0-egprs: Using 1 x modem (candidates: 4) 19:17:47.163678 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 19:17:47.296862 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:17:47.620564 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5762): Launched 19:17:47.887193 run iperf3-srv_10.42.42.10(pid=5763): Launched 19:17:48.076253 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 19:17:48.205363 run iperf3-srv_10.42.42.10: Starting iperf3-srv 19:17:48.526480 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5764): Launched 19:17:48.793709 run iperf3-srv_10.42.42.10(pid=5765): Launched 19:17:48.982162 tst cs_paging_gprs_active.py:38: start network... 19:17:49.110568 run osmo-hlr_10.42.42.2: Starting osmo-hlr 19:17:49.604113 run create_hlr_db(pid=5766): Launched 19:17:49.781494 bus /gobi_6: Setting Powered False 19:17:50.803190 run create_hlr_db(pid=5766): Terminated: ok {rc=0} 19:17:51.213744 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5768): Launched 19:17:51.523024 run osmo-hlr_10.42.42.2(pid=5769): Launched 19:17:51.645409 run osmo-stp_10.42.42.5: Starting osmo-stp 19:17:52.186062 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5771): Launched 19:17:52.495207 run osmo-stp_10.42.42.5(pid=5772): Launched 19:17:52.607377 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 19:17:53.143749 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5774): Launched 19:17:53.253538 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 19:17:53.522114 run patchelf(pid=5775): Launched 19:17:53.702296 run osmo-stp_10.42.42.5(pid=5772): ERR: Terminated: ERROR {rc=1} [trial-2363↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5772)] 19:17:53.834134 run osmo-stp_10.42.42.5(pid=5772): stdout: | (launched: 2022-12-09_19:17:52.342665) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:17:53.965852 run osmo-stp_10.42.42.5(pid=5772): stderr: | �[0;m�[38;5;43m20221209191752515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209191752515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209191752515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209191752516 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209191752516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209191752516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209191752516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:17:54.092832 run osmo-stp_10.42.42.5(pid=5772): stdout: | (launched: 2022-12-09_19:17:52.342665) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 19:17:54.218834 run osmo-stp_10.42.42.5(pid=5772): stderr: | �[0;m�[38;5;43m20221209191752515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209191752515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209191752515 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209191752516 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209191752516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209191752516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209191752516 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 19:17:54.365793 run patchelf(pid=5775): Terminating (SIGINT) 19:17:54.538806 run patchelf(pid=5775): Terminated: ok {rc=0} 19:17:54.570573 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5772): Process ended prematurely: osmo-stp_10.42.42.5(pid=5772) [trial-2363↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5772)] [trial-2363↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 19:17:54.579769 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 19:17:54.639299 run osmo-hlr_10.42.42.2(pid=5769): ERR: Terminated: ERROR {rc=237} [trial-2363↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5769)] 19:17:54.687420 run osmo-hlr_10.42.42.2(pid=5769): stdout: | (launched: 2022-12-09_19:17:51.370737) 19:17:54.735985 run osmo-hlr_10.42.42.2(pid=5769): stderr: | �[0;m�[1;31m20221209191751551 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209191751551 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209191751551 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209191751551 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209191751551 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209191751551 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209191751563 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2363/run.2022-12-09_18-37-22/gprs:trx-umtrx+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209191751572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209191751572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209191751572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 19:17:54.777378 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5762): Terminating (SIGTERM) 19:17:54.816346 run iperf3-srv_10.42.42.10(pid=5763): Terminating (SIGTERM) 19:17:54.855378 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5764): Terminating (SIGTERM) 19:17:54.894246 run iperf3-srv_10.42.42.10(pid=5765): Terminating (SIGTERM) 19:17:54.933155 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5768): Terminating (SIGTERM) 19:17:54.971999 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5771): Terminating (SIGTERM) 19:17:55.010945 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5774): Terminating (SIGTERM) 19:17:55.020041 --- ParallelTerminationStrategy: PID 5762 died... 19:17:55.072217 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5762): Terminated: ok {rc=0} 19:17:55.081771 --- ParallelTerminationStrategy: PID 5763 died... 19:17:55.133725 run iperf3-srv_10.42.42.10(pid=5763): Terminated {rc=256} 19:17:55.143142 --- ParallelTerminationStrategy: PID 5764 died... 19:17:55.195067 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5764): Terminated: ok {rc=0} 19:17:55.204456 --- ParallelTerminationStrategy: PID 5765 died... 19:17:55.256441 run iperf3-srv_10.42.42.10(pid=5765): Terminated {rc=256} 19:17:55.265921 --- ParallelTerminationStrategy: PID 5768 died... 19:17:55.317928 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5768): Terminated: ok {rc=0} 19:17:55.327395 --- ParallelTerminationStrategy: PID 5771 died... 19:17:55.381174 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5771): Terminated: ok {rc=0} 19:17:55.390819 --- ParallelTerminationStrategy: PID 5774 died... 19:17:55.443307 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5774): Terminated: ok {rc=0} 19:17:55.531239 bus /gobi_0: Setting Powered False 19:17:56.633611 bus /gobi_0: Setting Powered False 19:17:57.745315 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5772): Process ended prematurely: osmo-stp_10.42.42.5(pid=5772) [trial-2363↪gprs:trx-umtrx+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5772)]