Failed
dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=11154): Process ended prematurely: osmo-stp_10.42.42.5(pid=11154) [trial-2364↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11154)]
Standard Output
---------------------------------------------- trial-2364 dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 20:22:31.372398 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:22:31.384087 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 20:22:31.561916 tst switch_tch_pdch.py: using LAC 23490 20:22:31.724478 tst switch_tch_pdch.py: using RAC 30 20:22:31.885800 tst switch_tch_pdch.py: using CellId 23490 20:22:32.019512 tst switch_tch_pdch.py: using BVCI 23491 20:22:32.044558 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:22:32.056847 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:22:32.068783 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:22:32.081058 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:22:32.093508 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:22:32.106296 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:22:32.118572 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 20:22:32.130509 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 20:22:32.253616 tst dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 20:22:32.550277 tst switch_tch_pdch.py:51: start network... 20:22:32.684061 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:22:33.197846 run create_hlr_db(pid=11143): Launched 20:22:33.383776 bus /gobi_6: Setting Powered False 20:22:34.403665 run create_hlr_db(pid=11143): Terminated: ok {rc=0} 20:22:34.830768 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11145): Launched 20:22:35.152892 run osmo-hlr_10.42.42.2(pid=11146): Launched 20:22:35.270005 run osmo-stp_10.42.42.5: Starting osmo-stp 20:22:35.827073 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11148): Launched 20:22:36.149437 run osmo-stp_10.42.42.5(pid=11154): Launched 20:22:36.265241 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:22:36.823268 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11156): Launched 20:22:36.937434 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:22:37.216786 run patchelf(pid=11157): Launched 20:22:37.404886 run osmo-stp_10.42.42.5(pid=11154): ERR: Terminated: ERROR {rc=1} [trial-2364↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11154)] 20:22:37.541251 run osmo-stp_10.42.42.5(pid=11154): stdout: | (launched: 2022-12-09_20:22:35.991406) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:22:37.677712 run osmo-stp_10.42.42.5(pid=11154): stderr: | �[0;m�[38;5;43m20221209202236185 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202236186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202236186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202236186 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202236187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202236187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202236187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:22:37.810494 run osmo-stp_10.42.42.5(pid=11154): stdout: | (launched: 2022-12-09_20:22:35.991406) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:22:37.941199 run osmo-stp_10.42.42.5(pid=11154): stderr: | �[0;m�[38;5;43m20221209202236185 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202236186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202236186 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202236186 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202236187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202236187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202236187 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:22:38.093180 run patchelf(pid=11157): Terminating (SIGINT) 20:22:38.272162 run patchelf(pid=11157): Terminated: ok {rc=0} 20:22:38.304660 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=11154): Process ended prematurely: osmo-stp_10.42.42.5(pid=11154) [trial-2364↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11154)] [trial-2364↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 20:22:38.314233 tst switch_tch_pdch.py:54: Test FAILED (6.9 sec) 20:22:38.376705 run osmo-hlr_10.42.42.2(pid=11146): ERR: Terminated: ERROR {rc=237} [trial-2364↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11146)] 20:22:38.427772 run osmo-hlr_10.42.42.2(pid=11146): stdout: | (launched: 2022-12-09_20:22:34.994299) 20:22:38.479502 run osmo-hlr_10.42.42.2(pid=11146): stderr: | �[0;m�[1;31m20221209202235193 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209202235193 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209202235193 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209202235193 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209202235193 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209202235193 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209202235204 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209202235213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209202235213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209202235213 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:22:38.523524 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11145): Terminating (SIGTERM) 20:22:38.564930 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11148): Terminating (SIGTERM) 20:22:38.606552 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11156): Terminating (SIGTERM) 20:22:38.615728 --- ParallelTerminationStrategy: PID 11145 died... 20:22:38.670981 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11145): Terminated: ok {rc=0} 20:22:38.680822 --- ParallelTerminationStrategy: PID 11148 died... 20:22:38.735806 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11148): Terminated: ok {rc=0} 20:22:38.745779 --- ParallelTerminationStrategy: PID 11156 died... 20:22:38.801284 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11156): Terminated: ok {rc=0} 20:22:38.888253 bus /gobi_0: Setting Powered False 20:22:39.989317 bus /gobi_0: Setting Powered False 20:22:41.099368 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11154): Process ended prematurely: osmo-stp_10.42.42.5(pid=11154) [trial-2364↪dynts:oc2g+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11154)]