Failed
gprs:sysmo.cs_paging_gprs_active.py (from gprs_sysmo)
Stacktrace
osmo-stp_10.42.42.5(pid=10280): Process ended prematurely: osmo-stp_10.42.42.5(pid=10280) [trial-2364↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10280)]
Standard Output
---------------------------------------------- trial-2364 gprs:sysmo cs_paging_gprs_active.py ---------------------------------------------- 20:10:36.825814 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:36.836102 tst gprs:sysmo: Using 1 x bts (candidates: 1) 20:10:36.957848 tst cs_paging_gprs_active.py: using LAC 23428 20:10:37.080326 tst cs_paging_gprs_active.py: using RAC 223 20:10:37.199014 tst cs_paging_gprs_active.py: using CellId 23428 20:10:37.327520 tst cs_paging_gprs_active.py: using BVCI 23429 20:10:37.352583 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:37.363658 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:37.374677 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:37.385816 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:37.396478 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:37.407260 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:37.418050 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:37.428744 tst gprs:sysmo: Using 1 x ip_address (candidates: 9) 20:10:37.439755 tst gprs:sysmo: Using 1 x modem (candidates: 4) 20:10:37.554278 tst gprs:sysmo: Using 1 x modem (candidates: 4) 20:10:37.851219 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:10:37.988062 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:10:38.322688 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10270): Launched 20:10:38.601829 run iperf3-srv_10.42.42.10(pid=10271): Launched 20:10:38.800119 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:10:38.935145 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:10:39.269375 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10272): Launched 20:10:39.548142 run iperf3-srv_10.42.42.10(pid=10273): Launched 20:10:39.747582 tst cs_paging_gprs_active.py:38: start network... 20:10:39.882930 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:10:40.401840 run create_hlr_db(pid=10274): Launched 20:10:40.589939 bus /sierra_2: Setting Powered False 20:10:41.609934 run create_hlr_db(pid=10274): Terminated: ok {rc=0} 20:10:42.048242 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10276): Launched 20:10:42.373446 run osmo-hlr_10.42.42.2(pid=10277): Launched 20:10:42.491982 run osmo-stp_10.42.42.5: Starting osmo-stp 20:10:43.052311 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10279): Launched 20:10:43.375669 run osmo-stp_10.42.42.5(pid=10280): Launched 20:10:43.494217 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:10:45.063617 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10282): Launched 20:10:45.200345 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:10:45.485614 run patchelf(pid=10283): Launched 20:10:45.674431 run osmo-stp_10.42.42.5(pid=10280): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10280)] 20:10:45.811908 run osmo-stp_10.42.42.5(pid=10280): stdout: | (launched: 2022-12-09_20:10:43.216616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:10:45.959905 run osmo-stp_10.42.42.5(pid=10280): stderr: | �[0;m�[38;5;43m20221209201043408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201043408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201043408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201043408 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201043409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201043409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201043409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:10:46.090282 run osmo-stp_10.42.42.5(pid=10280): stdout: | (launched: 2022-12-09_20:10:43.216616) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:10:46.218983 run osmo-stp_10.42.42.5(pid=10280): stderr: | �[0;m�[38;5;43m20221209201043408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209201043408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209201043408 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209201043408 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209201043409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209201043409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209201043409 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:10:46.368333 run patchelf(pid=10283): Terminating (SIGINT) 20:10:46.543738 run patchelf(pid=10283): Terminated: ok {rc=0} 20:10:46.576578 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10280): Process ended prematurely: osmo-stp_10.42.42.5(pid=10280) [trial-2364↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10280)] [trial-2364↪gprs:sysmo↪cs_paging_gprs_active.py:38] 20:10:46.587311 tst cs_paging_gprs_active.py:38: Test FAILED (9.8 sec) 20:10:46.651894 run osmo-hlr_10.42.42.2(pid=10277): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:sysmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10277)] 20:10:46.703944 run osmo-hlr_10.42.42.2(pid=10277): stdout: | (launched: 2022-12-09_20:10:42.213496) 20:10:46.756667 run osmo-hlr_10.42.42.2(pid=10277): stderr: | �[0;m�[1;31m20221209201042414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209201042414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209201042414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209201042414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209201042414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209201042414 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209201042426 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:sysmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209201042435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209201042435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209201042435 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:10:46.799986 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10270): Terminating (SIGTERM) 20:10:46.845348 run iperf3-srv_10.42.42.10(pid=10271): Terminating (SIGTERM) 20:10:46.888244 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10272): Terminating (SIGTERM) 20:10:46.931814 run iperf3-srv_10.42.42.10(pid=10273): Terminating (SIGTERM) 20:10:46.978630 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10276): Terminating (SIGTERM) 20:10:47.022393 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10279): Terminating (SIGTERM) 20:10:47.065992 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10282): Terminating (SIGTERM) 20:10:47.077589 --- ParallelTerminationStrategy: PID 10270 died... 20:10:47.134986 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10270): Terminated: ok {rc=0} 20:10:47.146482 --- ParallelTerminationStrategy: PID 10271 died... 20:10:47.202544 run iperf3-srv_10.42.42.10(pid=10271): Terminated {rc=256} 20:10:47.212138 --- ParallelTerminationStrategy: PID 10272 died... 20:10:47.265699 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10272): Terminated: ok {rc=0} 20:10:47.276069 --- ParallelTerminationStrategy: PID 10273 died... 20:10:47.329671 run iperf3-srv_10.42.42.10(pid=10273): Terminated {rc=256} 20:10:47.339926 --- ParallelTerminationStrategy: PID 10276 died... 20:10:47.394151 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10276): Terminated: ok {rc=0} 20:10:47.403749 --- ParallelTerminationStrategy: PID 10279 died... 20:10:47.457402 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10279): Terminated: ok {rc=0} 20:10:47.467854 --- ParallelTerminationStrategy: PID 10282 died... 20:10:47.522451 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10282): Terminated: ok {rc=0} 20:10:47.611034 bus /gobi_0: Setting Powered False 20:10:48.715008 bus /gobi_0: Setting Powered False 20:10:49.827236 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10280): Process ended prematurely: osmo-stp_10.42.42.5(pid=10280) [trial-2364↪gprs:sysmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10280)]