Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=11751): Process ended prematurely: osmo-stp_10.42.42.5(pid=11751) [trial-2364↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11751)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 20:27:09.931824 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:09.942851 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 20:27:10.089371 tst cs_paging_gprs_active.py: using LAC 23516 20:27:10.214795 tst cs_paging_gprs_active.py: using RAC 56 20:27:10.341758 tst cs_paging_gprs_active.py: using CellId 23516 20:27:10.462065 tst cs_paging_gprs_active.py: using BVCI 23517 20:27:10.485205 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:10.495853 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:10.506302 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:10.517047 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:10.527620 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:10.538057 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:10.548755 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:10.559439 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 20:27:10.570211 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 20:27:10.689076 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 20:27:10.984612 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:27:11.119991 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:27:11.454833 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11741): Launched 20:27:11.733908 run iperf3-srv_10.42.42.10(pid=11742): Launched 20:27:11.933529 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:27:12.069423 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:27:12.404197 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11743): Launched 20:27:12.683297 run iperf3-srv_10.42.42.10(pid=11744): Launched 20:27:12.882831 tst cs_paging_gprs_active.py:38: start network... 20:27:13.019515 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:27:13.531576 run create_hlr_db(pid=11745): Launched 20:27:13.706592 bus /sierra_2: Setting Powered False 20:27:14.727800 run create_hlr_db(pid=11745): Terminated: ok {rc=0} 20:27:15.130456 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11747): Launched 20:27:15.433284 run osmo-hlr_10.42.42.2(pid=11748): Launched 20:27:15.552287 run osmo-stp_10.42.42.5: Starting osmo-stp 20:27:16.128847 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11750): Launched 20:27:16.536485 run osmo-stp_10.42.42.5(pid=11751): Launched 20:27:16.773022 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:27:17.313647 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11753): Launched 20:27:17.422212 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:27:17.687506 run patchelf(pid=11754): Launched 20:27:17.865288 run osmo-stp_10.42.42.5(pid=11751): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11751)] 20:27:17.995173 run osmo-stp_10.42.42.5(pid=11751): stdout: | (launched: 2022-12-09_20:27:16.285522) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:27:18.125678 run osmo-stp_10.42.42.5(pid=11751): stderr: | �[0;m�[38;5;43m20221209202716591 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202716592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202716592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202716592 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202716593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202716593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202716593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:27:18.251459 run osmo-stp_10.42.42.5(pid=11751): stdout: | (launched: 2022-12-09_20:27:16.285522) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:27:18.376298 run osmo-stp_10.42.42.5(pid=11751): stderr: | �[0;m�[38;5;43m20221209202716591 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209202716592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209202716592 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209202716592 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209202716593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209202716593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209202716593 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:27:18.521509 run patchelf(pid=11754): Terminating (SIGINT) 20:27:18.691660 run patchelf(pid=11754): Terminated: ok {rc=0} 20:27:18.722959 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=11751): Process ended prematurely: osmo-stp_10.42.42.5(pid=11751) [trial-2364↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11751)] [trial-2364↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 20:27:18.732330 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 20:27:18.792488 run osmo-hlr_10.42.42.2(pid=11748): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=11748)] 20:27:18.841175 run osmo-hlr_10.42.42.2(pid=11748): stdout: | (launched: 2022-12-09_20:27:15.284022) 20:27:18.890549 run osmo-hlr_10.42.42.2(pid=11748): stderr: | �[0;m�[1;31m20221209202715457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209202715457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209202715457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209202715457 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209202715458 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209202715458 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209202715469 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209202715477 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209202715478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209202715478 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:27:18.932385 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11741): Terminating (SIGTERM) 20:27:18.971903 run iperf3-srv_10.42.42.10(pid=11742): Terminating (SIGTERM) 20:27:19.011665 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11743): Terminating (SIGTERM) 20:27:19.050793 run iperf3-srv_10.42.42.10(pid=11744): Terminating (SIGTERM) 20:27:19.090346 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11747): Terminating (SIGTERM) 20:27:19.130112 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11750): Terminating (SIGTERM) 20:27:19.170133 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11753): Terminating (SIGTERM) 20:27:19.179515 --- ParallelTerminationStrategy: PID 11741 died... 20:27:19.232679 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11741): Terminated: ok {rc=0} 20:27:19.242435 --- ParallelTerminationStrategy: PID 11742 died... 20:27:19.295623 run iperf3-srv_10.42.42.10(pid=11742): Terminated {rc=256} 20:27:19.305186 --- ParallelTerminationStrategy: PID 11743 died... 20:27:19.357678 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=11743): Terminated: ok {rc=0} 20:27:19.367220 --- ParallelTerminationStrategy: PID 11744 died... 20:27:19.419631 run iperf3-srv_10.42.42.10(pid=11744): Terminated {rc=256} 20:27:19.429108 --- ParallelTerminationStrategy: PID 11747 died... 20:27:19.481332 run pcap-recorder_any(filters='host 10.42.42.2')(pid=11747): Terminated: ok {rc=0} 20:27:19.490946 --- ParallelTerminationStrategy: PID 11750 died... 20:27:19.543475 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=11750): Terminated: ok {rc=0} 20:27:19.553266 --- ParallelTerminationStrategy: PID 11753 died... 20:27:19.606597 run pcap-recorder_any(filters='host 10.42.42.6')(pid=11753): Terminated: ok {rc=0} 20:27:19.696185 bus /gobi_0: Setting Powered False 20:27:20.798620 bus /gobi_0: Setting Powered False 20:27:21.909797 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=11751): Process ended prematurely: osmo-stp_10.42.42.5(pid=11751) [trial-2364↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=11751)]