Failed
gprs:trx-lms+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_trx-lms+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=14368): Process ended prematurely: osmo-stp_10.42.42.5(pid=14368) [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14368)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-lms+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 20:56:58.065777 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:58.077263 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:56:58.241565 tst ping_idle_ping.py: using LAC 23673 20:56:58.368869 tst ping_idle_ping.py: using RAC 213 20:56:58.495969 tst ping_idle_ping.py: using CellId 23673 20:56:58.621708 tst ping_idle_ping.py: using BVCI 23674 20:56:58.646479 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:58.657980 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:58.669329 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:58.681297 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:58.693892 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:58.705882 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:58.717331 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:56:58.729006 tst gprs:trx-lms+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:56:59.007286 tst ping_idle_ping.py:24: start network... 20:56:59.132030 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:56:59.608077 run create_hlr_db(pid=14362): Launched 20:56:59.781975 bus /gobi_6: Setting Powered False 20:57:00.803614 run create_hlr_db(pid=14362): Terminated: ok {rc=0} 20:57:01.267854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14364): Launched 20:57:01.708340 run osmo-hlr_10.42.42.2(pid=14365): Launched 20:57:01.959623 run osmo-stp_10.42.42.5: Starting osmo-stp 20:57:02.564390 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14367): Launched 20:57:02.862454 run osmo-stp_10.42.42.5(pid=14368): Launched 20:57:02.971315 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:57:03.491490 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14370): Launched 20:57:03.598523 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:57:03.859042 run patchelf(pid=14371): Launched 20:57:04.033867 run osmo-stp_10.42.42.5(pid=14368): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14368)] 20:57:04.162376 run osmo-stp_10.42.42.5(pid=14368): stdout: | (launched: 2022-12-09_20:57:02.715898) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:57:04.290497 run osmo-stp_10.42.42.5(pid=14368): stderr: | �[0;m�[38;5;43m20221209205702887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209205702888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209205702888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209205702888 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209205702889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209205702889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209205702889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:57:04.414543 run osmo-stp_10.42.42.5(pid=14368): stdout: | (launched: 2022-12-09_20:57:02.715898) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:57:04.537215 run osmo-stp_10.42.42.5(pid=14368): stderr: | �[0;m�[38;5;43m20221209205702887 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209205702888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209205702888 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209205702888 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209205702889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209205702889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209205702889 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:57:04.680032 run patchelf(pid=14371): Terminating (SIGINT) 20:57:04.847919 run patchelf(pid=14371): Terminated: ok {rc=0} 20:57:04.878655 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=14368): Process ended prematurely: osmo-stp_10.42.42.5(pid=14368) [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14368)] [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 20:57:04.887399 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 20:57:04.948727 run osmo-hlr_10.42.42.2(pid=14365): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14365)] 20:57:04.997907 run osmo-hlr_10.42.42.2(pid=14365): stdout: | (launched: 2022-12-09_20:57:01.435404) 20:57:05.048306 run osmo-hlr_10.42.42.2(pid=14365): stderr: | �[0;m�[1;31m20221209205701688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209205701688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209205701688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209205701688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209205701688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209205701688 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209205701704 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-lms+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209205701721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209205701721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209205701721 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:57:05.090516 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14364): Terminating (SIGTERM) 20:57:05.130815 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14367): Terminating (SIGTERM) 20:57:05.171048 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14370): Terminating (SIGTERM) 20:57:05.180901 --- ParallelTerminationStrategy: PID 14364 died... 20:57:05.234200 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14364): Terminated: ok {rc=0} 20:57:05.244415 --- ParallelTerminationStrategy: PID 14367 died... 20:57:05.297153 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14367): Terminated: ok {rc=0} 20:57:05.307063 --- ParallelTerminationStrategy: PID 14370 died... 20:57:05.360072 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14370): Terminated: ok {rc=0} 20:57:05.443038 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14368): Process ended prematurely: osmo-stp_10.42.42.5(pid=14368) [trial-2364↪gprs:trx-lms+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14368)]