Failed
gprs:trx-lms+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_trx-lms+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=14178): Process ended prematurely: osmo-stp_10.42.42.5(pid=14178) [trial-2364↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14178)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-lms+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 20:54:09.234874 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.246092 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x bts (candidates: 1) 20:54:09.392874 tst cs_paging_gprs_active.py: using LAC 23659 20:54:09.522477 tst cs_paging_gprs_active.py: using RAC 199 20:54:09.651743 tst cs_paging_gprs_active.py: using CellId 23659 20:54:09.779419 tst cs_paging_gprs_active.py: using BVCI 23660 20:54:09.804470 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.815834 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.826863 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.837920 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.848862 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.859830 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.871092 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.882058 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 20:54:09.893236 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:54:10.010156 tst gprs:trx-lms+mod-bts0-egprs: Using 1 x modem (candidates: 4) 20:54:10.293602 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:54:10.421955 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:54:10.740196 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14168): Launched 20:54:11.003499 run iperf3-srv_10.42.42.10(pid=14169): Launched 20:54:11.189852 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:54:11.317686 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:54:11.633101 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14170): Launched 20:54:11.902973 run iperf3-srv_10.42.42.10(pid=14171): Launched 20:54:12.103463 tst cs_paging_gprs_active.py:38: start network... 20:54:12.240217 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:54:12.763639 run create_hlr_db(pid=14172): Launched 20:54:12.951519 bus /gobi_6: Setting Powered False 20:54:13.971546 run create_hlr_db(pid=14172): Terminated: ok {rc=0} 20:54:14.404673 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14174): Launched 20:54:14.731244 run osmo-hlr_10.42.42.2(pid=14175): Launched 20:54:14.853730 run osmo-stp_10.42.42.5: Starting osmo-stp 20:54:15.419433 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14177): Launched 20:54:15.744766 run osmo-stp_10.42.42.5(pid=14178): Launched 20:54:15.918675 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:54:16.563151 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14180): Launched 20:54:16.675985 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:54:16.964104 run patchelf(pid=14181): Launched 20:54:17.151164 run osmo-stp_10.42.42.5(pid=14178): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14178)] 20:54:17.284856 run osmo-stp_10.42.42.5(pid=14178): stdout: | (launched: 2022-12-09_20:54:15.584827) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:54:17.417163 run osmo-stp_10.42.42.5(pid=14178): stderr: | �[0;m�[38;5;43m20221209205415779 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209205415779 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209205415779 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209205415780 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209205415780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209205415780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209205415781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:54:17.543579 run osmo-stp_10.42.42.5(pid=14178): stdout: | (launched: 2022-12-09_20:54:15.584827) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:54:17.668721 run osmo-stp_10.42.42.5(pid=14178): stderr: | �[0;m�[38;5;43m20221209205415779 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209205415779 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209205415779 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209205415780 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209205415780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209205415780 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209205415781 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:54:17.815083 run patchelf(pid=14181): Terminating (SIGINT) 20:54:17.986999 run patchelf(pid=14181): Terminated: ok {rc=0} 20:54:18.018758 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=14178): Process ended prematurely: osmo-stp_10.42.42.5(pid=14178) [trial-2364↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14178)] [trial-2364↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 20:54:18.028265 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 20:54:18.089515 run osmo-hlr_10.42.42.2(pid=14175): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14175)] 20:54:18.139702 run osmo-hlr_10.42.42.2(pid=14175): stdout: | (launched: 2022-12-09_20:54:14.570883) 20:54:18.189805 run osmo-hlr_10.42.42.2(pid=14175): stderr: | �[0;m�[1;31m20221209205414771 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209205414771 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209205414772 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209205414772 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209205414772 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209205414772 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209205414783 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-lms+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209205414792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209205414792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209205414792 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:54:18.231619 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14168): Terminating (SIGTERM) 20:54:18.271837 run iperf3-srv_10.42.42.10(pid=14169): Terminating (SIGTERM) 20:54:18.312195 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14170): Terminating (SIGTERM) 20:54:18.352622 run iperf3-srv_10.42.42.10(pid=14171): Terminating (SIGTERM) 20:54:18.393251 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14174): Terminating (SIGTERM) 20:54:18.433908 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14177): Terminating (SIGTERM) 20:54:18.474400 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14180): Terminating (SIGTERM) 20:54:18.484192 --- ParallelTerminationStrategy: PID 14168 died... 20:54:18.538576 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14168): Terminated: ok {rc=0} 20:54:18.548306 --- ParallelTerminationStrategy: PID 14169 died... 20:54:18.601620 run iperf3-srv_10.42.42.10(pid=14169): Terminated {rc=256} 20:54:18.611833 --- ParallelTerminationStrategy: PID 14170 died... 20:54:18.665540 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=14170): Terminated: ok {rc=0} 20:54:18.675604 --- ParallelTerminationStrategy: PID 14171 died... 20:54:18.729084 run iperf3-srv_10.42.42.10(pid=14171): Terminated {rc=256} 20:54:18.739336 --- ParallelTerminationStrategy: PID 14174 died... 20:54:18.792687 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14174): Terminated: ok {rc=0} 20:54:18.802994 --- ParallelTerminationStrategy: PID 14177 died... 20:54:18.856696 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14177): Terminated: ok {rc=0} 20:54:18.867020 --- ParallelTerminationStrategy: PID 14180 died... 20:54:18.920609 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14180): Terminated: ok {rc=0} 20:54:19.010347 bus /gobi_0: Setting Powered False 20:54:20.115691 bus /gobi_0: Setting Powered False 20:54:21.222057 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14178): Process ended prematurely: osmo-stp_10.42.42.5(pid=14178) [trial-2364↪gprs:trx-lms+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14178)]