Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=12850): Process ended prematurely: osmo-stp_10.42.42.5(pid=12850) [trial-2364↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12850)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-sysmocell5000+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:39:05.600942 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:05.612520 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:39:05.775653 tst cs_paging_gprs_active.py: using LAC 23578 20:39:05.898500 tst cs_paging_gprs_active.py: using RAC 118 20:39:06.019500 tst cs_paging_gprs_active.py: using CellId 23578 20:39:06.142253 tst cs_paging_gprs_active.py: using BVCI 23579 20:39:06.166002 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:06.177074 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:06.187995 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:06.199613 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:06.211162 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:06.222693 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:06.234289 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:06.245859 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:39:06.257507 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:39:06.381377 tst gprs:trx-sysmocell5000+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:39:06.666410 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:39:06.796093 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:39:07.116897 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12840): Launched 20:39:07.382062 run iperf3-srv_10.42.42.10(pid=12841): Launched 20:39:07.572380 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:39:07.701618 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:39:08.020592 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12842): Launched 20:39:08.284525 run iperf3-srv_10.42.42.10(pid=12843): Launched 20:39:08.472367 tst cs_paging_gprs_active.py:38: start network... 20:39:08.600906 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:39:09.085790 run create_hlr_db(pid=12844): Launched 20:39:09.262958 bus /gobi_6: Setting Powered False 20:39:10.295681 run create_hlr_db(pid=12844): Terminated: ok {rc=0} 20:39:10.705724 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12846): Launched 20:39:11.013028 run osmo-hlr_10.42.42.2(pid=12847): Launched 20:39:11.132155 run osmo-stp_10.42.42.5: Starting osmo-stp 20:39:11.670928 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12849): Launched 20:39:11.978943 run osmo-stp_10.42.42.5(pid=12850): Launched 20:39:12.091468 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:39:12.623454 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12852): Launched 20:39:12.732757 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:39:13.001079 run patchelf(pid=12853): Launched 20:39:13.181093 run osmo-stp_10.42.42.5(pid=12850): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12850)] 20:39:13.312521 run osmo-stp_10.42.42.5(pid=12850): stdout: | (launched: 2022-12-09_20:39:11.826856) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:39:13.444169 run osmo-stp_10.42.42.5(pid=12850): stderr: | �[0;m�[38;5;43m20221209203911998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209203911998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209203911999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209203911999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209203911999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209203912000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209203912000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:39:13.570871 run osmo-stp_10.42.42.5(pid=12850): stdout: | (launched: 2022-12-09_20:39:11.826856) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:39:13.696446 run osmo-stp_10.42.42.5(pid=12850): stderr: | �[0;m�[38;5;43m20221209203911998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209203911998 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209203911999 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209203911999 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209203911999 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209203912000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209203912000 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:39:13.843334 run patchelf(pid=12853): Terminating (SIGINT) 20:39:14.015225 run patchelf(pid=12853): Terminated: ok {rc=0} 20:39:14.046903 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=12850): Process ended prematurely: osmo-stp_10.42.42.5(pid=12850) [trial-2364↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12850)] [trial-2364↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:39:14.056340 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 20:39:14.117048 run osmo-hlr_10.42.42.2(pid=12847): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=12847)] 20:39:14.165933 run osmo-hlr_10.42.42.2(pid=12847): stdout: | (launched: 2022-12-09_20:39:10.861988) 20:39:14.215611 run osmo-hlr_10.42.42.2(pid=12847): stderr: | �[0;m�[1;31m20221209203911036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209203911036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209203911036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209203911036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209203911036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209203911037 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209203911048 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-sysmocell5000+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209203911058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209203911058 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209203911059 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:39:14.257472 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12840): Terminating (SIGTERM) 20:39:14.297084 run iperf3-srv_10.42.42.10(pid=12841): Terminating (SIGTERM) 20:39:14.336701 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12842): Terminating (SIGTERM) 20:39:14.376715 run iperf3-srv_10.42.42.10(pid=12843): Terminating (SIGTERM) 20:39:14.416447 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12846): Terminating (SIGTERM) 20:39:14.455945 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12849): Terminating (SIGTERM) 20:39:14.495505 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12852): Terminating (SIGTERM) 20:39:14.504769 --- ParallelTerminationStrategy: PID 12840 died... 20:39:14.557816 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12840): Terminated: ok {rc=0} 20:39:14.567585 --- ParallelTerminationStrategy: PID 12841 died... 20:39:14.621145 run iperf3-srv_10.42.42.10(pid=12841): Terminated {rc=256} 20:39:14.630560 --- ParallelTerminationStrategy: PID 12842 died... 20:39:14.683022 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=12842): Terminated: ok {rc=0} 20:39:14.692585 --- ParallelTerminationStrategy: PID 12843 died... 20:39:14.745084 run iperf3-srv_10.42.42.10(pid=12843): Terminated {rc=256} 20:39:14.754678 --- ParallelTerminationStrategy: PID 12846 died... 20:39:14.807490 run pcap-recorder_any(filters='host 10.42.42.2')(pid=12846): Terminated: ok {rc=0} 20:39:14.817046 --- ParallelTerminationStrategy: PID 12849 died... 20:39:14.869941 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=12849): Terminated: ok {rc=0} 20:39:14.879685 --- ParallelTerminationStrategy: PID 12852 died... 20:39:14.932310 run pcap-recorder_any(filters='host 10.42.42.6')(pid=12852): Terminated: ok {rc=0} 20:39:15.016142 bus /gobi_0: Setting Powered False 20:39:16.137466 bus /gobi_0: Setting Powered False 20:39:17.247673 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=12850): Process ended prematurely: osmo-stp_10.42.42.5(pid=12850) [trial-2364↪gprs:trx-sysmocell5000+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=12850)]