Failed
gprs:trx-umtrx+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=13423): Process ended prematurely: osmo-stp_10.42.42.5(pid=13423) [trial-2364↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13423)]
Standard Output
---------------------------------------------- trial-2364 gprs:trx-umtrx+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 20:47:16.203800 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.215896 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 20:47:16.382896 tst cs_paging_gprs_active.py: using LAC 23622 20:47:16.539190 tst cs_paging_gprs_active.py: using RAC 162 20:47:16.674492 tst cs_paging_gprs_active.py: using CellId 23622 20:47:16.797858 tst cs_paging_gprs_active.py: using BVCI 23623 20:47:16.822122 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.833982 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.845665 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.858649 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.872675 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.885040 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.896889 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.911530 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 20:47:16.925101 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:47:17.047802 tst gprs:trx-umtrx+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 20:47:17.343590 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 20:47:17.469621 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:47:17.780684 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13413): Launched 20:47:18.038324 run iperf3-srv_10.42.42.10(pid=13414): Launched 20:47:18.222131 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 20:47:18.347376 run iperf3-srv_10.42.42.10: Starting iperf3-srv 20:47:18.657259 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13415): Launched 20:47:18.914808 run iperf3-srv_10.42.42.10(pid=13416): Launched 20:47:19.098910 tst cs_paging_gprs_active.py:38: start network... 20:47:19.224521 run osmo-hlr_10.42.42.2: Starting osmo-hlr 20:47:19.698006 run create_hlr_db(pid=13417): Launched 20:47:19.870796 bus /gobi_6: Setting Powered False 20:47:20.903376 run create_hlr_db(pid=13417): Terminated: ok {rc=0} 20:47:21.306424 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13419): Launched 20:47:21.607169 run osmo-hlr_10.42.42.2(pid=13420): Launched 20:47:21.724637 run osmo-stp_10.42.42.5: Starting osmo-stp 20:47:22.253932 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13422): Launched 20:47:22.553687 run osmo-stp_10.42.42.5(pid=13423): Launched 20:47:22.663410 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 20:47:23.184766 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13425): Launched 20:47:23.292100 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 20:47:23.555221 run patchelf(pid=13426): Launched 20:47:23.730710 run osmo-stp_10.42.42.5(pid=13423): ERR: Terminated: ERROR {rc=1} [trial-2364↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13423)] 20:47:23.858813 run osmo-stp_10.42.42.5(pid=13423): stdout: | (launched: 2022-12-09_20:47:22.406012) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:47:23.987517 run osmo-stp_10.42.42.5(pid=13423): stderr: | �[0;m�[38;5;43m20221209204722575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209204722575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209204722575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209204722576 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209204722576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209204722576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209204722576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:47:24.111638 run osmo-stp_10.42.42.5(pid=13423): stdout: | (launched: 2022-12-09_20:47:22.406012) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 20:47:24.234925 run osmo-stp_10.42.42.5(pid=13423): stderr: | �[0;m�[38;5;43m20221209204722575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209204722575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209204722575 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209204722576 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209204722576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209204722576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209204722576 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 20:47:24.378837 run patchelf(pid=13426): Terminating (SIGINT) 20:47:24.547622 run patchelf(pid=13426): Terminated: ok {rc=0} 20:47:24.578851 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13423): Process ended prematurely: osmo-stp_10.42.42.5(pid=13423) [trial-2364↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13423)] [trial-2364↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 20:47:24.588304 tst cs_paging_gprs_active.py:38: Test FAILED (8.4 sec) 20:47:24.648475 run osmo-hlr_10.42.42.2(pid=13420): ERR: Terminated: ERROR {rc=237} [trial-2364↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13420)] 20:47:24.697202 run osmo-hlr_10.42.42.2(pid=13420): stdout: | (launched: 2022-12-09_20:47:21.459101) 20:47:24.747192 run osmo-hlr_10.42.42.2(pid=13420): stderr: | �[0;m�[1;31m20221209204721634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209204721634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209204721634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209204721634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209204721634 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209204721635 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209204721647 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2364/run.2022-12-09_20-04-44/gprs:trx-umtrx+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209204721657 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209204721657 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209204721657 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 20:47:24.788811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13413): Terminating (SIGTERM) 20:47:24.828211 run iperf3-srv_10.42.42.10(pid=13414): Terminating (SIGTERM) 20:47:24.867736 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13415): Terminating (SIGTERM) 20:47:24.906947 run iperf3-srv_10.42.42.10(pid=13416): Terminating (SIGTERM) 20:47:24.946528 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13419): Terminating (SIGTERM) 20:47:24.985811 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13422): Terminating (SIGTERM) 20:47:25.025321 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13425): Terminating (SIGTERM) 20:47:25.034557 --- ParallelTerminationStrategy: PID 13413 died... 20:47:25.087748 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13413): Terminated: ok {rc=0} 20:47:25.097359 --- ParallelTerminationStrategy: PID 13414 died... 20:47:25.150152 run iperf3-srv_10.42.42.10(pid=13414): Terminated {rc=256} 20:47:25.159871 --- ParallelTerminationStrategy: PID 13415 died... 20:47:25.212390 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13415): Terminated: ok {rc=0} 20:47:25.222171 --- ParallelTerminationStrategy: PID 13416 died... 20:47:25.274506 run iperf3-srv_10.42.42.10(pid=13416): Terminated {rc=256} 20:47:25.284144 --- ParallelTerminationStrategy: PID 13419 died... 20:47:25.337019 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13419): Terminated: ok {rc=0} 20:47:25.346696 --- ParallelTerminationStrategy: PID 13422 died... 20:47:25.399559 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13422): Terminated: ok {rc=0} 20:47:25.409332 --- ParallelTerminationStrategy: PID 13425 died... 20:47:25.462260 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13425): Terminated: ok {rc=0} 20:47:25.550650 bus /gobi_0: Setting Powered False 20:47:26.653117 bus /gobi_0: Setting Powered False 20:47:27.761820 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13423): Process ended prematurely: osmo-stp_10.42.42.5(pid=13423) [trial-2364↪gprs:trx-umtrx+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13423)]