Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=2396): Process ended prematurely: osmo-stp_10.42.42.5(pid=2396) [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2396)]
Standard Output
---------------------------------------------- trial-2366 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 00:23:44.290543 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.301818 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 00:23:44.435200 tst cs_paging_gprs_active.py: using LAC 24704 00:23:44.553997 tst cs_paging_gprs_active.py: using RAC 224 00:23:44.670441 tst cs_paging_gprs_active.py: using CellId 24704 00:23:44.786475 tst cs_paging_gprs_active.py: using BVCI 24705 00:23:44.809227 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.820459 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.831728 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.842956 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.854113 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.865191 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.876394 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.887419 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 00:23:44.898741 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:23:45.017543 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 00:23:45.308769 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:23:45.442822 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:23:45.771648 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2386): Launched 00:23:46.089547 run iperf3-srv_10.42.42.10(pid=2387): Launched 00:23:46.288377 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:23:46.424673 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:23:46.795714 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2388): Launched 00:23:47.090786 run iperf3-srv_10.42.42.10(pid=2389): Launched 00:23:47.289132 tst cs_paging_gprs_active.py:38: start network... 00:23:47.421863 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:23:47.923008 run create_hlr_db(pid=2390): Launched 00:23:48.108076 bus /gobi_6: Setting Powered False 00:23:49.128931 run create_hlr_db(pid=2390): Terminated: ok {rc=0} 00:23:49.530135 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2392): Launched 00:23:49.829285 run osmo-hlr_10.42.42.2(pid=2393): Launched 00:23:49.945007 run osmo-stp_10.42.42.5: Starting osmo-stp 00:23:50.471443 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2395): Launched 00:23:50.769981 run osmo-stp_10.42.42.5(pid=2396): Launched 00:23:50.888424 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:23:51.416525 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2398): Launched 00:23:51.522947 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:23:51.782238 run patchelf(pid=2399): Launched 00:23:51.980727 run osmo-stp_10.42.42.5(pid=2396): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2396)] 00:23:52.108168 run osmo-stp_10.42.42.5(pid=2396): stdout: | (launched: 2022-12-10_00:23:50.623458) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:23:52.236296 run osmo-stp_10.42.42.5(pid=2396): stderr: | �[0;m�[38;5;43m20221210002350794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210002350794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210002350795 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210002350795 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210002350795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210002350795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210002350796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:23:52.359351 run osmo-stp_10.42.42.5(pid=2396): stdout: | (launched: 2022-12-10_00:23:50.623458) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:23:52.481102 run osmo-stp_10.42.42.5(pid=2396): stderr: | �[0;m�[38;5;43m20221210002350794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210002350794 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210002350795 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210002350795 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210002350795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210002350795 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210002350796 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:23:52.623271 run patchelf(pid=2399): Terminating (SIGINT) 00:23:52.790427 run patchelf(pid=2399): Terminated: ok {rc=0} 00:23:52.821569 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=2396): Process ended prematurely: osmo-stp_10.42.42.5(pid=2396) [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2396)] [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 00:23:52.830757 tst cs_paging_gprs_active.py:38: Test FAILED (8.6 sec) 00:23:52.889571 run osmo-hlr_10.42.42.2(pid=2393): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=2393)] 00:23:52.937940 run osmo-hlr_10.42.42.2(pid=2393): stdout: | (launched: 2022-12-10_00:23:49.682398) 00:23:52.986859 run osmo-hlr_10.42.42.2(pid=2393): stderr: | �[0;m�[1;31m20221210002349858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210002349858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210002349858 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210002349859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210002349859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210002349859 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210002349871 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210002349881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210002349881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210002349881 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:23:53.028413 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2386): Terminating (SIGTERM) 00:23:53.067334 run iperf3-srv_10.42.42.10(pid=2387): Terminating (SIGTERM) 00:23:53.106418 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2388): Terminating (SIGTERM) 00:23:53.145263 run iperf3-srv_10.42.42.10(pid=2389): Terminating (SIGTERM) 00:23:53.184265 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2392): Terminating (SIGTERM) 00:23:53.223309 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2395): Terminating (SIGTERM) 00:23:53.262495 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2398): Terminating (SIGTERM) 00:23:53.271424 --- ParallelTerminationStrategy: PID 2386 died... 00:23:53.324319 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2386): Terminated: ok {rc=0} 00:23:53.333700 --- ParallelTerminationStrategy: PID 2387 died... 00:23:53.386148 run iperf3-srv_10.42.42.10(pid=2387): Terminated {rc=256} 00:23:53.395416 --- ParallelTerminationStrategy: PID 2388 died... 00:23:53.447537 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=2388): Terminated: ok {rc=0} 00:23:53.456826 --- ParallelTerminationStrategy: PID 2389 died... 00:23:53.508864 run iperf3-srv_10.42.42.10(pid=2389): Terminated {rc=256} 00:23:53.518579 --- ParallelTerminationStrategy: PID 2392 died... 00:23:53.570597 run pcap-recorder_any(filters='host 10.42.42.2')(pid=2392): Terminated: ok {rc=0} 00:23:53.579890 --- ParallelTerminationStrategy: PID 2395 died... 00:23:53.632411 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=2395): Terminated: ok {rc=0} 00:23:53.641763 --- ParallelTerminationStrategy: PID 2398 died... 00:23:53.694357 run pcap-recorder_any(filters='host 10.42.42.6')(pid=2398): Terminated: ok {rc=0} 00:23:53.781634 bus /gobi_0: Setting Powered False 00:23:54.884146 bus /gobi_0: Setting Powered False 00:23:55.994614 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=2396): Process ended prematurely: osmo-stp_10.42.42.5(pid=2396) [trial-2366↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=2396)]