Failed
gprs:oc2g+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=29640): Process ended prematurely: osmo-stp_10.42.42.5(pid=29640) [trial-2366↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29640)]
Standard Output
---------------------------------------------- trial-2366 gprs:oc2g+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 23:27:15.234819 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.245517 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 23:27:15.387559 tst cs_paging_gprs_active.py: using LAC 24402 23:27:15.504370 tst cs_paging_gprs_active.py: using RAC 177 23:27:15.622110 tst cs_paging_gprs_active.py: using CellId 24402 23:27:15.738195 tst cs_paging_gprs_active.py: using BVCI 24403 23:27:15.761183 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.771827 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.782303 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.792717 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.803162 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.813603 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.824097 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.834479 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 23:27:15.845162 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:27:15.965578 tst gprs:oc2g+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 23:27:16.261456 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 23:27:16.387097 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:27:16.718622 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29630): Launched 23:27:17.018268 run iperf3-srv_10.42.42.10(pid=29631): Launched 23:27:17.202781 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 23:27:17.329208 run iperf3-srv_10.42.42.10: Starting iperf3-srv 23:27:17.636346 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29632): Launched 23:27:17.890379 run iperf3-srv_10.42.42.10(pid=29633): Launched 23:27:18.070429 tst cs_paging_gprs_active.py:38: start network... 23:27:18.193694 run osmo-hlr_10.42.42.2: Starting osmo-hlr 23:27:18.667098 run create_hlr_db(pid=29634): Launched 23:27:18.836831 bus /gobi_6: Setting Powered False 23:27:19.858655 run create_hlr_db(pid=29634): Terminated: ok {rc=0} 23:27:20.253568 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29636): Launched 23:27:20.551876 run osmo-hlr_10.42.42.2(pid=29637): Launched 23:27:20.667066 run osmo-stp_10.42.42.5: Starting osmo-stp 23:27:21.190540 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29639): Launched 23:27:21.487872 run osmo-stp_10.42.42.5(pid=29640): Launched 23:27:21.596270 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 23:27:22.112092 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29642): Launched 23:27:22.217446 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 23:27:22.474553 run patchelf(pid=29643): Launched 23:27:22.647231 run osmo-stp_10.42.42.5(pid=29640): ERR: Terminated: ERROR {rc=1} [trial-2366↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29640)] 23:27:22.773915 run osmo-stp_10.42.42.5(pid=29640): stdout: | (launched: 2022-12-09_23:27:21.342313) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:27:22.900872 run osmo-stp_10.42.42.5(pid=29640): stderr: | �[0;m�[38;5;43m20221209232721512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232721512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232721513 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232721513 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232721514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232721514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232721514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:27:23.023328 run osmo-stp_10.42.42.5(pid=29640): stdout: | (launched: 2022-12-09_23:27:21.342313) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 23:27:23.144104 run osmo-stp_10.42.42.5(pid=29640): stderr: | �[0;m�[38;5;43m20221209232721512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221209232721512 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221209232721513 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221209232721513 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221209232721514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221209232721514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221209232721514 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 23:27:23.286328 run patchelf(pid=29643): Terminating (SIGINT) 23:27:23.453174 run patchelf(pid=29643): Terminated: ok {rc=0} 23:27:23.483711 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=29640): Process ended prematurely: osmo-stp_10.42.42.5(pid=29640) [trial-2366↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29640)] [trial-2366↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 23:27:23.492641 tst cs_paging_gprs_active.py:38: Test FAILED (8.3 sec) 23:27:23.551491 run osmo-hlr_10.42.42.2(pid=29637): ERR: Terminated: ERROR {rc=237} [trial-2366↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=29637)] 23:27:23.599669 run osmo-hlr_10.42.42.2(pid=29637): stdout: | (launched: 2022-12-09_23:27:20.405801) 23:27:23.648511 run osmo-hlr_10.42.42.2(pid=29637): stderr: | �[0;m�[1;31m20221209232720583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221209232720583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221209232720583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221209232720583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221209232720583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221209232720583 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221209232720596 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2366/run.2022-12-09_23-11-33/gprs:oc2g+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221209232720606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221209232720606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221209232720606 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 23:27:23.690125 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29630): Terminating (SIGTERM) 23:27:23.728835 run iperf3-srv_10.42.42.10(pid=29631): Terminating (SIGTERM) 23:27:23.767441 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29632): Terminating (SIGTERM) 23:27:23.805826 run iperf3-srv_10.42.42.10(pid=29633): Terminating (SIGTERM) 23:27:23.844741 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29636): Terminating (SIGTERM) 23:27:23.883274 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29639): Terminating (SIGTERM) 23:27:23.921849 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29642): Terminating (SIGTERM) 23:27:23.930666 --- ParallelTerminationStrategy: PID 29630 died... 23:27:23.983117 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29630): Terminated: ok {rc=0} 23:27:23.992359 --- ParallelTerminationStrategy: PID 29631 died... 23:27:24.044228 run iperf3-srv_10.42.42.10(pid=29631): Terminated {rc=256} 23:27:24.053514 --- ParallelTerminationStrategy: PID 29632 died... 23:27:24.105403 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=29632): Terminated: ok {rc=0} 23:27:24.114668 --- ParallelTerminationStrategy: PID 29633 died... 23:27:24.166392 run iperf3-srv_10.42.42.10(pid=29633): Terminated {rc=256} 23:27:24.175626 --- ParallelTerminationStrategy: PID 29636 died... 23:27:24.228337 run pcap-recorder_any(filters='host 10.42.42.2')(pid=29636): Terminated: ok {rc=0} 23:27:24.237698 --- ParallelTerminationStrategy: PID 29639 died... 23:27:24.289513 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=29639): Terminated: ok {rc=0} 23:27:24.298764 --- ParallelTerminationStrategy: PID 29642 died... 23:27:24.350603 run pcap-recorder_any(filters='host 10.42.42.6')(pid=29642): Terminated: ok {rc=0} 23:27:24.437435 bus /gobi_0: Setting Powered False 23:27:25.540223 bus /gobi_0: Setting Powered False 23:27:26.650654 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=29640): Process ended prematurely: osmo-stp_10.42.42.5(pid=29640) [trial-2366↪gprs:oc2g+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=29640)]