Failed
gprs:sysmo+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_sysmo+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=4063): Process ended prematurely: osmo-stp_10.42.42.5(pid=4063) [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4063)]
Standard Output
---------------------------------------------- trial-2367 gprs:sysmo+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 00:47:52.460364 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:52.471687 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 00:47:52.626357 tst cs_paging_gprs_active.py: using LAC 24821 00:47:52.759247 tst cs_paging_gprs_active.py: using RAC 86 00:47:52.889837 tst cs_paging_gprs_active.py: using CellId 24821 00:47:53.023263 tst cs_paging_gprs_active.py: using BVCI 24822 00:47:53.048999 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:53.060206 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:53.071412 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:53.083173 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:53.094826 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:53.106504 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:53.119034 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:53.130259 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 00:47:53.142269 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:47:53.261972 tst gprs:sysmo+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 00:47:53.564090 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:47:53.705144 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:47:54.051322 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4053): Launched 00:47:54.339759 run iperf3-srv_10.42.42.10(pid=4054): Launched 00:47:54.543666 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:47:54.683273 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:47:55.028119 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4055): Launched 00:47:55.315352 run iperf3-srv_10.42.42.10(pid=4056): Launched 00:47:55.519287 tst cs_paging_gprs_active.py:38: start network... 00:47:55.659209 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:47:56.194485 run create_hlr_db(pid=4057): Launched 00:47:56.386537 bus /gobi_6: Setting Powered False 00:47:57.407972 run create_hlr_db(pid=4057): Terminated: ok {rc=0} 00:47:57.854677 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4059): Launched 00:47:58.189299 run osmo-hlr_10.42.42.2(pid=4060): Launched 00:47:58.311229 run osmo-stp_10.42.42.5: Starting osmo-stp 00:47:58.890192 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4062): Launched 00:47:59.225815 run osmo-stp_10.42.42.5(pid=4063): Launched 00:47:59.347318 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:47:59.933297 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4065): Launched 00:48:00.052226 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:48:00.344348 run patchelf(pid=4066): Launched 00:48:00.537840 run osmo-stp_10.42.42.5(pid=4063): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4063)] 00:48:00.679468 run osmo-stp_10.42.42.5(pid=4063): stdout: | (launched: 2022-12-10_00:47:59.059314) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:00.821152 run osmo-stp_10.42.42.5(pid=4063): stderr: | �[0;m�[38;5;43m20221210004759253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004759253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004759253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004759254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004759256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004759256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004759256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:00.966185 run osmo-stp_10.42.42.5(pid=4063): stdout: | (launched: 2022-12-10_00:47:59.059314) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:48:01.101807 run osmo-stp_10.42.42.5(pid=4063): stderr: | �[0;m�[38;5;43m20221210004759253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004759253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004759253 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004759254 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004759256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004759256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004759256 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:48:01.252878 run patchelf(pid=4066): Terminating (SIGINT) 00:48:01.439876 run patchelf(pid=4066): Terminated: ok {rc=0} 00:48:01.473894 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=4063): Process ended prematurely: osmo-stp_10.42.42.5(pid=4063) [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4063)] [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 00:48:01.484199 tst cs_paging_gprs_active.py:38: Test FAILED (9.1 sec) 00:48:01.547678 run osmo-hlr_10.42.42.2(pid=4060): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4060)] 00:48:01.599576 run osmo-hlr_10.42.42.2(pid=4060): stdout: | (launched: 2022-12-10_00:47:58.024592) 00:48:01.652673 run osmo-hlr_10.42.42.2(pid=4060): stderr: | �[0;m�[1;31m20221210004758227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210004758227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210004758227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210004758227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210004758227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210004758227 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210004758240 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:sysmo+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210004758250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210004758250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210004758250 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:48:01.698238 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4053): Terminating (SIGTERM) 00:48:01.740439 run iperf3-srv_10.42.42.10(pid=4054): Terminating (SIGTERM) 00:48:01.782700 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4055): Terminating (SIGTERM) 00:48:01.825126 run iperf3-srv_10.42.42.10(pid=4056): Terminating (SIGTERM) 00:48:01.867569 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4059): Terminating (SIGTERM) 00:48:01.912022 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4062): Terminating (SIGTERM) 00:48:01.954589 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4065): Terminating (SIGTERM) 00:48:01.964194 --- ParallelTerminationStrategy: PID 4053 died... 00:48:02.020550 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4053): Terminated: ok {rc=0} 00:48:02.031011 --- ParallelTerminationStrategy: PID 4054 died... 00:48:02.086828 run iperf3-srv_10.42.42.10(pid=4054): Terminated {rc=256} 00:48:02.097341 --- ParallelTerminationStrategy: PID 4055 died... 00:48:02.152837 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=4055): Terminated: ok {rc=0} 00:48:02.163200 --- ParallelTerminationStrategy: PID 4056 died... 00:48:02.218367 run iperf3-srv_10.42.42.10(pid=4056): Terminated {rc=256} 00:48:02.228602 --- ParallelTerminationStrategy: PID 4059 died... 00:48:02.284048 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4059): Terminated: ok {rc=0} 00:48:02.293961 --- ParallelTerminationStrategy: PID 4062 died... 00:48:02.348917 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4062): Terminated: ok {rc=0} 00:48:02.358868 --- ParallelTerminationStrategy: PID 4065 died... 00:48:02.413528 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4065): Terminated: ok {rc=0} 00:48:02.500182 bus /gobi_0: Setting Powered False 00:48:03.602357 bus /gobi_0: Setting Powered False 00:48:04.711067 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4063): Process ended prematurely: osmo-stp_10.42.42.5(pid=4063) [trial-2367↪gprs:sysmo+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4063)]