Failed
gprs:trx-b200.cs_paging_gprs_active.py (from gprs_trx-b200)
Stacktrace
osmo-stp_10.42.42.5(pid=5895): Process ended prematurely: osmo-stp_10.42.42.5(pid=5895) [trial-2367↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5895)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-b200 cs_paging_gprs_active.py ---------------------------------------------- 01:02:22.190401 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.201310 tst gprs:trx-b200: Using 1 x bts (candidates: 1) 01:02:22.346297 tst cs_paging_gprs_active.py: using LAC 24899 01:02:22.474132 tst cs_paging_gprs_active.py: using RAC 164 01:02:22.603693 tst cs_paging_gprs_active.py: using CellId 24899 01:02:22.732052 tst cs_paging_gprs_active.py: using BVCI 24900 01:02:22.757019 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.768054 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.778873 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.789789 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.800489 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.811242 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.822204 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.832834 tst gprs:trx-b200: Using 1 x ip_address (candidates: 9) 01:02:22.843847 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 01:02:22.963201 tst gprs:trx-b200: Using 1 x modem (candidates: 4) 01:02:23.258678 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:02:23.395123 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:02:23.732379 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5885): Launched 01:02:24.013541 run iperf3-srv_10.42.42.10(pid=5886): Launched 01:02:24.213643 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:02:24.349779 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:02:24.687338 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5887): Launched 01:02:24.966858 run iperf3-srv_10.42.42.10(pid=5888): Launched 01:02:25.166637 tst cs_paging_gprs_active.py:38: start network... 01:02:25.302801 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:02:25.823990 run create_hlr_db(pid=5889): Launched 01:02:26.011606 bus /sierra_2: Setting Powered False 01:02:27.022740 run create_hlr_db(pid=5889): Terminated: ok {rc=0} 01:02:27.462459 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5891): Launched 01:02:27.789712 run osmo-hlr_10.42.42.2(pid=5892): Launched 01:02:27.908833 run osmo-stp_10.42.42.5: Starting osmo-stp 01:02:28.474533 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5894): Launched 01:02:28.801940 run osmo-stp_10.42.42.5(pid=5895): Launched 01:02:28.920109 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:02:29.488914 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5897): Launched 01:02:29.605502 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:02:29.889134 run patchelf(pid=5898): Launched 01:02:30.081028 run osmo-stp_10.42.42.5(pid=5895): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5895)] 01:02:30.220156 run osmo-stp_10.42.42.5(pid=5895): stdout: | (launched: 2022-12-10_01:02:28.641321) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:02:30.359551 run osmo-stp_10.42.42.5(pid=5895): stderr: | �[0;m�[38;5;43m20221210010228834 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010228834 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010228834 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010228834 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010228835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010228835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010228835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:02:30.494391 run osmo-stp_10.42.42.5(pid=5895): stdout: | (launched: 2022-12-10_01:02:28.641321) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:02:30.628560 run osmo-stp_10.42.42.5(pid=5895): stderr: | �[0;m�[38;5;43m20221210010228834 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210010228834 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210010228834 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210010228834 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210010228835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210010228835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210010228835 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:02:30.783598 run patchelf(pid=5898): Terminating (SIGINT) 01:02:30.994489 run patchelf(pid=5898): Terminated: ok {rc=0} 01:02:31.039629 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5895): Process ended prematurely: osmo-stp_10.42.42.5(pid=5895) [trial-2367↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5895)] [trial-2367↪gprs:trx-b200↪cs_paging_gprs_active.py:38] 01:02:31.050491 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 01:02:31.116188 run osmo-hlr_10.42.42.2(pid=5892): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-b200↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5892)] 01:02:31.169227 run osmo-hlr_10.42.42.2(pid=5892): stdout: | (launched: 2022-12-10_01:02:27.628442) 01:02:31.222294 run osmo-hlr_10.42.42.2(pid=5892): stderr: | �[0;m�[1;31m20221210010227827 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210010227828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210010227828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210010227828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210010227828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210010227828 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210010227852 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-b200/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210010227862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210010227862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210010227862 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:02:31.268331 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5885): Terminating (SIGTERM) 01:02:31.311128 run iperf3-srv_10.42.42.10(pid=5886): Terminating (SIGTERM) 01:02:31.355978 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5887): Terminating (SIGTERM) 01:02:31.399354 run iperf3-srv_10.42.42.10(pid=5888): Terminating (SIGTERM) 01:02:31.442409 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5891): Terminating (SIGTERM) 01:02:31.487171 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5894): Terminating (SIGTERM) 01:02:31.530716 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5897): Terminating (SIGTERM) 01:02:31.540648 --- ParallelTerminationStrategy: PID 5885 died... 01:02:31.597936 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5885): Terminated: ok {rc=0} 01:02:31.608400 --- ParallelTerminationStrategy: PID 5886 died... 01:02:31.665040 run iperf3-srv_10.42.42.10(pid=5886): Terminated {rc=256} 01:02:31.675378 --- ParallelTerminationStrategy: PID 5887 died... 01:02:31.731828 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5887): Terminated: ok {rc=0} 01:02:31.742326 --- ParallelTerminationStrategy: PID 5888 died... 01:02:31.799004 run iperf3-srv_10.42.42.10(pid=5888): Terminated {rc=256} 01:02:31.809434 --- ParallelTerminationStrategy: PID 5891 died... 01:02:31.865978 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5891): Terminated: ok {rc=0} 01:02:31.876372 --- ParallelTerminationStrategy: PID 5894 died... 01:02:31.932878 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5894): Terminated: ok {rc=0} 01:02:31.943306 --- ParallelTerminationStrategy: PID 5897 died... 01:02:31.999789 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5897): Terminated: ok {rc=0} 01:02:32.089428 bus /gobi_0: Setting Powered False 01:02:33.195074 bus /gobi_0: Setting Powered False 01:02:34.304239 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5895): Process ended prematurely: osmo-stp_10.42.42.5(pid=5895) [trial-2367↪gprs:trx-b200↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5895)]