Failed
gprs:trx-sysmocell5000+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-sysmocell5000+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=7459): Process ended prematurely: osmo-stp_10.42.42.5(pid=7459) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7459)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-sysmocell5000+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 01:13:15.542365 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:15.553757 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:13:15.724213 tst cs_paging_gprs_active.py: using LAC 24956 01:13:15.857834 tst cs_paging_gprs_active.py: using RAC 221 01:13:15.986665 tst cs_paging_gprs_active.py: using CellId 24956 01:13:16.114773 tst cs_paging_gprs_active.py: using BVCI 24957 01:13:16.140770 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:16.153168 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:16.165522 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:16.177884 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:16.190741 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:16.203889 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:16.216882 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:16.229412 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:13:16.242046 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:13:16.364784 tst gprs:trx-sysmocell5000+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:13:16.690106 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:13:16.865370 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:13:17.227419 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7449): Launched 01:13:17.511333 run iperf3-srv_10.42.42.10(pid=7450): Launched 01:13:17.711623 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:13:17.847755 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:13:18.187631 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7451): Launched 01:13:18.467842 run iperf3-srv_10.42.42.10(pid=7452): Launched 01:13:18.667284 tst cs_paging_gprs_active.py:38: start network... 01:13:18.803227 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:13:19.327266 run create_hlr_db(pid=7453): Launched 01:13:19.515667 bus /gobi_6: Setting Powered False 01:13:20.537152 run create_hlr_db(pid=7453): Terminated: ok {rc=0} 01:13:20.947475 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7455): Launched 01:13:21.253945 run osmo-hlr_10.42.42.2(pid=7456): Launched 01:13:21.376902 run osmo-stp_10.42.42.5: Starting osmo-stp 01:13:21.915404 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7458): Launched 01:13:22.224231 run osmo-stp_10.42.42.5(pid=7459): Launched 01:13:22.335738 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:13:22.867860 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7461): Launched 01:13:22.976533 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:13:23.243337 run patchelf(pid=7462): Launched 01:13:23.422403 run osmo-stp_10.42.42.5(pid=7459): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7459)] 01:13:23.553147 run osmo-stp_10.42.42.5(pid=7459): stdout: | (launched: 2022-12-10_01:13:22.070521) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:13:23.684097 run osmo-stp_10.42.42.5(pid=7459): stderr: | �[0;m�[38;5;43m20221210011322243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210011322243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210011322243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210011322243 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210011322244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210011322244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210011322244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:13:23.810888 run osmo-stp_10.42.42.5(pid=7459): stdout: | (launched: 2022-12-10_01:13:22.070521) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:13:23.936085 run osmo-stp_10.42.42.5(pid=7459): stderr: | �[0;m�[38;5;43m20221210011322243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210011322243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210011322243 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210011322243 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210011322244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210011322244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210011322244 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:13:24.081491 run patchelf(pid=7462): Terminating (SIGINT) 01:13:24.251636 run patchelf(pid=7462): Terminated: ok {rc=0} 01:13:24.283017 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=7459): Process ended prematurely: osmo-stp_10.42.42.5(pid=7459) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7459)] [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 01:13:24.292280 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:13:24.353244 run osmo-hlr_10.42.42.2(pid=7456): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=7456)] 01:13:24.402418 run osmo-hlr_10.42.42.2(pid=7456): stdout: | (launched: 2022-12-10_01:13:21.102856) 01:13:24.452331 run osmo-hlr_10.42.42.2(pid=7456): stderr: | �[0;m�[1;31m20221210011321280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210011321280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210011321280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210011321280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210011321280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210011321280 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210011321292 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-sysmocell5000+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210011321301 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210011321301 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210011321301 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:13:24.494811 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7449): Terminating (SIGTERM) 01:13:24.534707 run iperf3-srv_10.42.42.10(pid=7450): Terminating (SIGTERM) 01:13:24.574277 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7451): Terminating (SIGTERM) 01:13:24.614072 run iperf3-srv_10.42.42.10(pid=7452): Terminating (SIGTERM) 01:13:24.654209 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7455): Terminating (SIGTERM) 01:13:24.694089 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7458): Terminating (SIGTERM) 01:13:24.733644 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7461): Terminating (SIGTERM) 01:13:24.743130 --- ParallelTerminationStrategy: PID 7449 died... 01:13:24.796564 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7449): Terminated: ok {rc=0} 01:13:24.806231 --- ParallelTerminationStrategy: PID 7450 died... 01:13:24.859277 run iperf3-srv_10.42.42.10(pid=7450): Terminated {rc=256} 01:13:24.868908 --- ParallelTerminationStrategy: PID 7451 died... 01:13:24.922430 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=7451): Terminated: ok {rc=0} 01:13:24.931823 --- ParallelTerminationStrategy: PID 7452 died... 01:13:24.984640 run iperf3-srv_10.42.42.10(pid=7452): Terminated {rc=256} 01:13:24.994395 --- ParallelTerminationStrategy: PID 7455 died... 01:13:25.047650 run pcap-recorder_any(filters='host 10.42.42.2')(pid=7455): Terminated: ok {rc=0} 01:13:25.057818 --- ParallelTerminationStrategy: PID 7458 died... 01:13:25.111521 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=7458): Terminated: ok {rc=0} 01:13:25.121162 --- ParallelTerminationStrategy: PID 7461 died... 01:13:25.174507 run pcap-recorder_any(filters='host 10.42.42.6')(pid=7461): Terminated: ok {rc=0} 01:13:25.263385 bus /gobi_0: Setting Powered False 01:13:26.367601 bus /gobi_0: Setting Powered False 01:13:27.480424 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=7459): Process ended prematurely: osmo-stp_10.42.42.5(pid=7459) [trial-2367↪gprs:trx-sysmocell5000+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=7459)]