Failed
gprs:trx-umtrx+mod-bts0-dynts-ipa.cs_paging_gprs_active.py (from gprs_trx-umtrx+mod-bts0-dynts-ipa)
Stacktrace
osmo-stp_10.42.42.5(pid=8035): Process ended prematurely: osmo-stp_10.42.42.5(pid=8035) [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8035)]
Standard Output
---------------------------------------------- trial-2367 gprs:trx-umtrx+mod-bts0-dynts-ipa cs_paging_gprs_active.py ---------------------------------------------- 01:21:29.622243 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:29.633381 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x bts (candidates: 1) 01:21:29.797407 tst cs_paging_gprs_active.py: using LAC 25000 01:21:29.922953 tst cs_paging_gprs_active.py: using RAC 10 01:21:30.050396 tst cs_paging_gprs_active.py: using CellId 25000 01:21:30.175899 tst cs_paging_gprs_active.py: using BVCI 25001 01:21:30.200506 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:30.211786 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:30.222795 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:30.233825 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:30.244828 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:30.255843 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:30.266974 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:30.277890 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x ip_address (candidates: 9) 01:21:30.289037 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:21:30.408010 tst gprs:trx-umtrx+mod-bts0-dynts-ipa: Using 1 x modem (candidates: 4) 01:21:30.682886 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:21:30.807800 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:21:31.170330 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8025): Launched 01:21:31.472525 run iperf3-srv_10.42.42.10(pid=8026): Launched 01:21:31.675645 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:21:31.813208 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:21:32.154501 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8027): Launched 01:21:32.413437 run iperf3-srv_10.42.42.10(pid=8028): Launched 01:21:32.594656 tst cs_paging_gprs_active.py:38: start network... 01:21:32.718906 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:21:33.191076 run create_hlr_db(pid=8029): Launched 01:21:33.362731 bus /gobi_6: Setting Powered False 01:21:34.385850 run create_hlr_db(pid=8029): Terminated: ok {rc=0} 01:21:34.812854 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8031): Launched 01:21:35.134934 run osmo-hlr_10.42.42.2(pid=8032): Launched 01:21:35.252228 run osmo-stp_10.42.42.5: Starting osmo-stp 01:21:35.808896 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8034): Launched 01:21:36.129430 run osmo-stp_10.42.42.5(pid=8035): Launched 01:21:36.245144 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:21:36.803938 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8037): Launched 01:21:36.918032 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:21:37.205544 run patchelf(pid=8038): Launched 01:21:37.392176 run osmo-stp_10.42.42.5(pid=8035): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8035)] 01:21:37.528653 run osmo-stp_10.42.42.5(pid=8035): stdout: | (launched: 2022-12-10_01:21:35.971743) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:21:37.665747 run osmo-stp_10.42.42.5(pid=8035): stderr: | �[0;m�[38;5;43m20221210012136162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210012136162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210012136162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210012136163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210012136163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210012136163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210012136163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:21:37.798616 run osmo-stp_10.42.42.5(pid=8035): stdout: | (launched: 2022-12-10_01:21:35.971743) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:21:37.929357 run osmo-stp_10.42.42.5(pid=8035): stderr: | �[0;m�[38;5;43m20221210012136162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210012136162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210012136162 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210012136163 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210012136163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210012136163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210012136163 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:21:38.081018 run patchelf(pid=8038): Terminating (SIGINT) 01:21:38.259612 run patchelf(pid=8038): Terminated: ok {rc=0} 01:21:38.292286 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=8035): Process ended prematurely: osmo-stp_10.42.42.5(pid=8035) [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8035)] [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38] 01:21:38.302008 tst cs_paging_gprs_active.py:38: Test FAILED (8.7 sec) 01:21:38.364163 run osmo-hlr_10.42.42.2(pid=8032): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=8032)] 01:21:38.414756 run osmo-hlr_10.42.42.2(pid=8032): stdout: | (launched: 2022-12-10_01:21:34.976598) 01:21:38.466035 run osmo-hlr_10.42.42.2(pid=8032): stderr: | �[0;m�[1;31m20221210012135173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210012135173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210012135173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210012135173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210012135173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210012135173 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210012135185 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:trx-umtrx+mod-bts0-dynts-ipa/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210012135194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210012135194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210012135194 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:21:38.509666 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8025): Terminating (SIGTERM) 01:21:38.550610 run iperf3-srv_10.42.42.10(pid=8026): Terminating (SIGTERM) 01:21:38.591708 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8027): Terminating (SIGTERM) 01:21:38.632563 run iperf3-srv_10.42.42.10(pid=8028): Terminating (SIGTERM) 01:21:38.674125 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8031): Terminating (SIGTERM) 01:21:38.715534 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8034): Terminating (SIGTERM) 01:21:38.756635 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8037): Terminating (SIGTERM) 01:21:38.766342 --- ParallelTerminationStrategy: PID 8025 died... 01:21:38.821457 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8025): Terminated: ok {rc=0} 01:21:38.831460 --- ParallelTerminationStrategy: PID 8026 died... 01:21:38.885953 run iperf3-srv_10.42.42.10(pid=8026): Terminated {rc=256} 01:21:38.895841 --- ParallelTerminationStrategy: PID 8027 died... 01:21:38.950891 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=8027): Terminated: ok {rc=0} 01:21:38.960784 --- ParallelTerminationStrategy: PID 8028 died... 01:21:39.015301 run iperf3-srv_10.42.42.10(pid=8028): Terminated {rc=256} 01:21:39.025314 --- ParallelTerminationStrategy: PID 8031 died... 01:21:39.079973 run pcap-recorder_any(filters='host 10.42.42.2')(pid=8031): Terminated: ok {rc=0} 01:21:39.090039 --- ParallelTerminationStrategy: PID 8034 died... 01:21:39.144710 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=8034): Terminated: ok {rc=0} 01:21:39.154686 --- ParallelTerminationStrategy: PID 8037 died... 01:21:39.209276 run pcap-recorder_any(filters='host 10.42.42.6')(pid=8037): Terminated: ok {rc=0} 01:21:39.295776 bus /gobi_0: Setting Powered False 01:21:40.398660 bus /gobi_0: Setting Powered False 01:21:41.504448 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=8035): Process ended prematurely: osmo-stp_10.42.42.5(pid=8035) [trial-2367↪gprs:trx-umtrx+mod-bts0-dynts-ipa↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=8035)]