Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.cs_paging_gprs_active.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=10762): Process ended prematurely: osmo-stp_10.42.42.5(pid=10762) [trial-2367↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10762)]
Standard Output
---------------------------------------------- trial-2367 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend cs_paging_gprs_active.py ---------------------------------------------- 01:52:29.787903 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:29.799043 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 01:52:29.947082 tst cs_paging_gprs_active.py: using LAC 25165 01:52:30.066553 tst cs_paging_gprs_active.py: using RAC 175 01:52:30.183015 tst cs_paging_gprs_active.py: using CellId 25165 01:52:30.308782 tst cs_paging_gprs_active.py: using BVCI 25166 01:52:30.333626 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:30.345536 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:30.357131 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:30.370126 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:30.381791 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:30.393554 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:30.405640 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:30.417428 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 01:52:30.429087 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:52:30.546892 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 01:52:30.822238 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 01:52:30.986922 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:52:31.341553 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10748): Launched 01:52:31.640008 run iperf3-srv_10.42.42.10(pid=10749): Launched 01:52:31.842068 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 01:52:31.969775 run iperf3-srv_10.42.42.10: Starting iperf3-srv 01:52:32.296398 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10750): Launched 01:52:32.573729 run iperf3-srv_10.42.42.10(pid=10751): Launched 01:52:32.770060 tst cs_paging_gprs_active.py:38: start network... 01:52:32.903375 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:52:33.416852 run create_hlr_db(pid=10752): Launched 01:52:33.601280 bus /gobi_6: Setting Powered False 01:52:34.623489 run create_hlr_db(pid=10752): Terminated: ok {rc=0} 01:52:35.048270 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10754): Launched 01:52:35.369239 run osmo-hlr_10.42.42.2(pid=10755): Launched 01:52:35.490161 run osmo-stp_10.42.42.5: Starting osmo-stp 01:52:36.049401 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10761): Launched 01:52:36.369809 run osmo-stp_10.42.42.5(pid=10762): Launched 01:52:36.486326 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:52:37.045913 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10764): Launched 01:52:37.160084 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:52:37.438721 run patchelf(pid=10765): Launched 01:52:37.626372 run osmo-stp_10.42.42.5(pid=10762): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10762)] 01:52:37.763224 run osmo-stp_10.42.42.5(pid=10762): stdout: | (launched: 2022-12-10_01:52:36.212437) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:52:37.900313 run osmo-stp_10.42.42.5(pid=10762): stderr: | �[0;m�[38;5;43m20221210015236404 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210015236404 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210015236405 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210015236405 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210015236405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210015236406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210015236406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:52:38.032551 run osmo-stp_10.42.42.5(pid=10762): stdout: | (launched: 2022-12-10_01:52:36.212437) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:52:38.163894 run osmo-stp_10.42.42.5(pid=10762): stderr: | �[0;m�[38;5;43m20221210015236404 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210015236404 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210015236405 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210015236405 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210015236405 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210015236406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210015236406 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:52:38.316212 run patchelf(pid=10765): Terminating (SIGINT) 01:52:38.495144 run patchelf(pid=10765): Terminated: ok {rc=0} 01:52:38.528054 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=10762): Process ended prematurely: osmo-stp_10.42.42.5(pid=10762) [trial-2367↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10762)] [trial-2367↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38] 01:52:38.537897 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 01:52:38.600143 run osmo-hlr_10.42.42.2(pid=10755): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10755)] 01:52:38.651390 run osmo-hlr_10.42.42.2(pid=10755): stdout: | (launched: 2022-12-10_01:52:35.211147) 01:52:38.703115 run osmo-hlr_10.42.42.2(pid=10755): stderr: | �[0;m�[1;31m20221210015235411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210015235411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210015235411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210015235411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210015235411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210015235411 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210015235423 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210015235431 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210015235432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210015235432 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:52:38.747171 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10748): Terminating (SIGTERM) 01:52:38.788392 run iperf3-srv_10.42.42.10(pid=10749): Terminating (SIGTERM) 01:52:38.829872 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10750): Terminating (SIGTERM) 01:52:38.871144 run iperf3-srv_10.42.42.10(pid=10751): Terminating (SIGTERM) 01:52:38.912557 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10754): Terminating (SIGTERM) 01:52:38.953951 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10761): Terminating (SIGTERM) 01:52:38.995292 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10764): Terminating (SIGTERM) 01:52:39.004897 --- ParallelTerminationStrategy: PID 10748 died... 01:52:39.060034 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10748): Terminated: ok {rc=0} 01:52:39.069946 --- ParallelTerminationStrategy: PID 10749 died... 01:52:39.124667 run iperf3-srv_10.42.42.10(pid=10749): Terminated {rc=256} 01:52:39.134480 --- ParallelTerminationStrategy: PID 10750 died... 01:52:39.189147 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=10750): Terminated: ok {rc=0} 01:52:39.198935 --- ParallelTerminationStrategy: PID 10751 died... 01:52:39.253605 run iperf3-srv_10.42.42.10(pid=10751): Terminated {rc=256} 01:52:39.263501 --- ParallelTerminationStrategy: PID 10754 died... 01:52:39.318660 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10754): Terminated: ok {rc=0} 01:52:39.328457 --- ParallelTerminationStrategy: PID 10761 died... 01:52:39.383242 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10761): Terminated: ok {rc=0} 01:52:39.393174 --- ParallelTerminationStrategy: PID 10764 died... 01:52:39.448021 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10764): Terminated: ok {rc=0} 01:52:39.534166 bus /gobi_0: Setting Powered False 01:52:40.641355 bus /gobi_0: Setting Powered False 01:52:41.748265 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10762): Process ended prematurely: osmo-stp_10.42.42.5(pid=10762) [trial-2367↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10762)]