Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=10603): Process ended prematurely: osmo-stp_10.42.42.5(pid=10603) [trial-2367↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10603)]
Standard Output
---------------------------------------------- trial-2367 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 01:50:20.527993 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:20.540167 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 01:50:20.677232 tst ping_idle_ping.py: using LAC 25154 01:50:20.795415 tst ping_idle_ping.py: using RAC 164 01:50:20.925946 tst ping_idle_ping.py: using CellId 25154 01:50:21.050036 tst ping_idle_ping.py: using BVCI 25155 01:50:21.072655 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:21.083494 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:21.094227 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:21.105655 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:21.117122 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:21.128370 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:21.139872 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 01:50:21.151248 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 01:50:21.426200 tst ping_idle_ping.py:24: start network... 01:50:21.549176 run osmo-hlr_10.42.42.2: Starting osmo-hlr 01:50:22.018600 run create_hlr_db(pid=10597): Launched 01:50:22.189793 bus /gobi_6: Setting Powered False 01:50:23.210862 run create_hlr_db(pid=10597): Terminated: ok {rc=0} 01:50:23.634058 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10599): Launched 01:50:23.951851 run osmo-hlr_10.42.42.2(pid=10600): Launched 01:50:24.068808 run osmo-stp_10.42.42.5: Starting osmo-stp 01:50:24.621484 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10602): Launched 01:50:24.939221 run osmo-stp_10.42.42.5(pid=10603): Launched 01:50:25.054019 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 01:50:25.607962 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10605): Launched 01:50:25.720701 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 01:50:25.996750 run patchelf(pid=10606): Launched 01:50:26.182088 run osmo-stp_10.42.42.5(pid=10603): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10603)] 01:50:26.317191 run osmo-stp_10.42.42.5(pid=10603): stdout: | (launched: 2022-12-10_01:50:24.782347) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:50:26.452363 run osmo-stp_10.42.42.5(pid=10603): stderr: | �[0;m�[38;5;43m20221210015024974 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210015024975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210015024975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210015024975 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210015024976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210015024976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210015024976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:50:26.584452 run osmo-stp_10.42.42.5(pid=10603): stdout: | (launched: 2022-12-10_01:50:24.782347) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 01:50:26.714443 run osmo-stp_10.42.42.5(pid=10603): stderr: | �[0;m�[38;5;43m20221210015024974 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210015024975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210015024975 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210015024975 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210015024976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210015024976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210015024976 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 01:50:26.864211 run patchelf(pid=10606): Terminating (SIGINT) 01:50:27.040665 run patchelf(pid=10606): Terminated: ok {rc=0} 01:50:27.072935 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=10603): Process ended prematurely: osmo-stp_10.42.42.5(pid=10603) [trial-2367↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10603)] [trial-2367↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 01:50:27.082218 tst ping_idle_ping.py:27: Test FAILED (6.5 sec) 01:50:27.144733 run osmo-hlr_10.42.42.2(pid=10600): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=10600)] 01:50:27.195872 run osmo-hlr_10.42.42.2(pid=10600): stdout: | (launched: 2022-12-10_01:50:23.795198) 01:50:27.247270 run osmo-hlr_10.42.42.2(pid=10600): stderr: | �[0;m�[1;31m20221210015023995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210015023995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210015023995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210015023995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210015023995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210015023995 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210015024008 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210015024018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210015024018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210015024018 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 01:50:27.291321 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10599): Terminating (SIGTERM) 01:50:27.333201 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10602): Terminating (SIGTERM) 01:50:27.375051 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10605): Terminating (SIGTERM) 01:50:27.384780 --- ParallelTerminationStrategy: PID 10599 died... 01:50:27.440524 run pcap-recorder_any(filters='host 10.42.42.2')(pid=10599): Terminated: ok {rc=0} 01:50:27.450798 --- ParallelTerminationStrategy: PID 10602 died... 01:50:27.506132 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=10602): Terminated: ok {rc=0} 01:50:27.516508 --- ParallelTerminationStrategy: PID 10605 died... 01:50:27.571849 run pcap-recorder_any(filters='host 10.42.42.6')(pid=10605): Terminated: ok {rc=0} 01:50:27.657520 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=10603): Process ended prematurely: osmo-stp_10.42.42.5(pid=10603) [trial-2367↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=10603)]