Failed
gprs:oc2g+mod-bts0-dynts-osmo.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=5501): Process ended prematurely: osmo-stp_10.42.42.5(pid=5501) [trial-2367↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5501)]
Standard Output
---------------------------------------------- trial-2367 gprs:oc2g+mod-bts0-dynts-osmo cs_paging_gprs_active.py ---------------------------------------------- 00:56:46.148330 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.160384 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:56:46.339151 tst cs_paging_gprs_active.py: using LAC 24868 00:56:46.470823 tst cs_paging_gprs_active.py: using RAC 133 00:56:46.598466 tst cs_paging_gprs_active.py: using CellId 24868 00:56:46.726610 tst cs_paging_gprs_active.py: using BVCI 24869 00:56:46.752312 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.764080 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.775895 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.787524 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.799481 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.811489 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.823383 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.835003 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:56:46.848037 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:56:46.967880 tst gprs:oc2g+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:56:47.304679 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 00:56:47.440919 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:56:47.774892 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5491): Launched 00:56:48.053392 run iperf3-srv_10.42.42.10(pid=5492): Launched 00:56:48.250518 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 00:56:48.385394 run iperf3-srv_10.42.42.10: Starting iperf3-srv 00:56:48.719026 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5493): Launched 00:56:48.996910 run iperf3-srv_10.42.42.10(pid=5494): Launched 00:56:49.194625 tst cs_paging_gprs_active.py:38: start network... 00:56:49.329318 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:56:49.846397 run create_hlr_db(pid=5495): Launched 00:56:50.033536 bus /gobi_6: Setting Powered False 00:56:51.054324 run create_hlr_db(pid=5495): Terminated: ok {rc=0} 00:56:51.483711 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5497): Launched 00:56:51.807591 run osmo-hlr_10.42.42.2(pid=5498): Launched 00:56:51.925933 run osmo-stp_10.42.42.5: Starting osmo-stp 00:56:52.488582 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5500): Launched 00:56:52.812889 run osmo-stp_10.42.42.5(pid=5501): Launched 00:56:52.930380 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:56:53.495730 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5503): Launched 00:56:53.611559 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:56:53.894600 run patchelf(pid=5504): Launched 00:56:54.085628 run osmo-stp_10.42.42.5(pid=5501): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5501)] 00:56:54.224229 run osmo-stp_10.42.42.5(pid=5501): stdout: | (launched: 2022-12-10_00:56:52.653720) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:56:54.363316 run osmo-stp_10.42.42.5(pid=5501): stderr: | �[0;m�[38;5;43m20221210005652845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210005652845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210005652845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210005652847 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210005652849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210005652849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210005652849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:56:54.497706 run osmo-stp_10.42.42.5(pid=5501): stdout: | (launched: 2022-12-10_00:56:52.653720) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:56:54.631161 run osmo-stp_10.42.42.5(pid=5501): stderr: | �[0;m�[38;5;43m20221210005652845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210005652845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210005652845 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210005652847 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210005652849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210005652849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210005652849 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:56:54.785879 run patchelf(pid=5504): Terminating (SIGINT) 00:56:54.967321 run patchelf(pid=5504): Terminated: ok {rc=0} 00:56:55.000536 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=5501): Process ended prematurely: osmo-stp_10.42.42.5(pid=5501) [trial-2367↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5501)] [trial-2367↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38] 00:56:55.010481 tst cs_paging_gprs_active.py:38: Test FAILED (8.9 sec) 00:56:55.072992 run osmo-hlr_10.42.42.2(pid=5498): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=5498)] 00:56:55.124035 run osmo-hlr_10.42.42.2(pid=5498): stdout: | (launched: 2022-12-10_00:56:51.648476) 00:56:55.175851 run osmo-hlr_10.42.42.2(pid=5498): stderr: | �[0;m�[1;31m20221210005651847 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210005651847 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210005651847 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210005651847 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210005651847 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210005651847 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210005651859 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:oc2g+mod-bts0-dynts-osmo/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210005651868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210005651868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210005651868 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:56:55.220046 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5491): Terminating (SIGTERM) 00:56:55.261611 run iperf3-srv_10.42.42.10(pid=5492): Terminating (SIGTERM) 00:56:55.303110 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5493): Terminating (SIGTERM) 00:56:55.344654 run iperf3-srv_10.42.42.10(pid=5494): Terminating (SIGTERM) 00:56:55.386223 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5497): Terminating (SIGTERM) 00:56:55.427681 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5500): Terminating (SIGTERM) 00:56:55.469136 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5503): Terminating (SIGTERM) 00:56:55.478663 --- ParallelTerminationStrategy: PID 5491 died... 00:56:55.534027 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5491): Terminated: ok {rc=0} 00:56:55.543896 --- ParallelTerminationStrategy: PID 5492 died... 00:56:55.598742 run iperf3-srv_10.42.42.10(pid=5492): Terminated {rc=256} 00:56:55.608460 --- ParallelTerminationStrategy: PID 5493 died... 00:56:55.663569 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=5493): Terminated: ok {rc=0} 00:56:55.673472 --- ParallelTerminationStrategy: PID 5494 died... 00:56:55.728300 run iperf3-srv_10.42.42.10(pid=5494): Terminated {rc=256} 00:56:55.738187 --- ParallelTerminationStrategy: PID 5497 died... 00:56:55.793071 run pcap-recorder_any(filters='host 10.42.42.2')(pid=5497): Terminated: ok {rc=0} 00:56:55.802945 --- ParallelTerminationStrategy: PID 5500 died... 00:56:55.857843 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=5500): Terminated: ok {rc=0} 00:56:55.867689 --- ParallelTerminationStrategy: PID 5503 died... 00:56:55.923170 run pcap-recorder_any(filters='host 10.42.42.6')(pid=5503): Terminated: ok {rc=0} 00:56:56.010585 bus /gobi_0: Setting Powered False 00:56:57.117296 bus /gobi_0: Setting Powered False 00:56:58.227841 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=5501): Process ended prematurely: osmo-stp_10.42.42.5(pid=5501) [trial-2367↪gprs:oc2g+mod-bts0-dynts-osmo↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=5501)]