Failed
gprs:sysmo+mod-bts0-dynts-osmo.ping_idle_ping.py (from gprs_sysmo+mod-bts0-dynts-osmo)
Stacktrace
osmo-stp_10.42.42.5(pid=4182): Process ended prematurely: osmo-stp_10.42.42.5(pid=4182) [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4182)]
Standard Output
---------------------------------------------- trial-2367 gprs:sysmo+mod-bts0-dynts-osmo ping_idle_ping.py ---------------------------------------------- 00:49:41.910711 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:41.922043 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x bts (candidates: 1) 00:49:42.067118 tst ping_idle_ping.py: using LAC 24830 00:49:42.184037 tst ping_idle_ping.py: using RAC 95 00:49:42.301623 tst ping_idle_ping.py: using CellId 24830 00:49:42.423725 tst ping_idle_ping.py: using BVCI 24831 00:49:42.446366 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:42.457285 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:42.467839 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:42.479210 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:42.490500 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:42.501836 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:42.513321 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x ip_address (candidates: 9) 00:49:42.524637 tst gprs:sysmo+mod-bts0-dynts-osmo: Using 1 x modem (candidates: 4) 00:49:42.810599 tst ping_idle_ping.py:24: start network... 00:49:42.941977 run osmo-hlr_10.42.42.2: Starting osmo-hlr 00:49:43.448399 run create_hlr_db(pid=4176): Launched 00:49:43.630196 bus /gobi_6: Setting Powered False 00:49:44.651473 run create_hlr_db(pid=4176): Terminated: ok {rc=0} 00:49:45.070554 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4178): Launched 00:49:45.385775 run osmo-hlr_10.42.42.2(pid=4179): Launched 00:49:45.502382 run osmo-stp_10.42.42.5: Starting osmo-stp 00:49:46.079201 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4181): Launched 00:49:46.433833 run osmo-stp_10.42.42.5(pid=4182): Launched 00:49:46.618894 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 00:49:47.241905 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4184): Launched 00:49:47.354233 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 00:49:47.627522 run patchelf(pid=4185): Launched 00:49:47.811726 run osmo-stp_10.42.42.5(pid=4182): ERR: Terminated: ERROR {rc=1} [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4182)] 00:49:47.946482 run osmo-stp_10.42.42.5(pid=4182): stdout: | (launched: 2022-12-10_00:49:46.241710) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:49:48.081410 run osmo-stp_10.42.42.5(pid=4182): stderr: | �[0;m�[38;5;43m20221210004946570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004946570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004946571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004946571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004946572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004946572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004946572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:49:48.212028 run osmo-stp_10.42.42.5(pid=4182): stdout: | (launched: 2022-12-10_00:49:46.241710) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 00:49:48.341860 run osmo-stp_10.42.42.5(pid=4182): stderr: | �[0;m�[38;5;43m20221210004946570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210004946570 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210004946571 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210004946571 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210004946572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210004946572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210004946572 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 00:49:48.492055 run patchelf(pid=4185): Terminating (SIGINT) 00:49:48.668226 run patchelf(pid=4185): Terminated: ok {rc=0} 00:49:48.700121 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=4182): Process ended prematurely: osmo-stp_10.42.42.5(pid=4182) [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4182)] [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27] 00:49:48.708918 tst ping_idle_ping.py:27: Test FAILED (6.8 sec) 00:49:48.771786 run osmo-hlr_10.42.42.2(pid=4179): ERR: Terminated: ERROR {rc=237} [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=4179)] 00:49:48.823041 run osmo-hlr_10.42.42.2(pid=4179): stdout: | (launched: 2022-12-10_00:49:45.230809) 00:49:48.874727 run osmo-hlr_10.42.42.2(pid=4179): stderr: | �[0;m�[1;31m20221210004945425 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210004945426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210004945426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210004945426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210004945426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210004945426 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210004945438 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2367/run.2022-12-10_00-40-00/gprs:sysmo+mod-bts0-dynts-osmo/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210004945447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210004945447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210004945447 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 00:49:48.918747 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4178): Terminating (SIGTERM) 00:49:48.960229 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4181): Terminating (SIGTERM) 00:49:49.001791 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4184): Terminating (SIGTERM) 00:49:49.011433 --- ParallelTerminationStrategy: PID 4178 died... 00:49:49.066715 run pcap-recorder_any(filters='host 10.42.42.2')(pid=4178): Terminated: ok {rc=0} 00:49:49.076605 --- ParallelTerminationStrategy: PID 4181 died... 00:49:49.131756 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=4181): Terminated: ok {rc=0} 00:49:49.141837 --- ParallelTerminationStrategy: PID 4184 died... 00:49:49.196852 run pcap-recorder_any(filters='host 10.42.42.6')(pid=4184): Terminated: ok {rc=0} 00:49:49.283813 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=4182): Process ended prematurely: osmo-stp_10.42.42.5(pid=4182) [trial-2367↪gprs:sysmo+mod-bts0-dynts-osmo↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=4182)]