Failed
dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any.switch_tch_pdch.py (from dynts_trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any)
Stacktrace
osmo-stp_10.42.42.5(pid=14284): Process ended prematurely: osmo-stp_10.42.42.5(pid=14284) [trial-2368↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14284)]
Standard Output
---------------------------------------------- trial-2368 dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any switch_tch_pdch.py ---------------------------------------------- 02:34:38.991973 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:34:39.003778 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x bts (candidates: 1) 02:34:39.168019 tst switch_tch_pdch.py: using LAC 25385 02:34:39.299313 tst switch_tch_pdch.py: using RAC 140 02:34:39.424263 tst switch_tch_pdch.py: using CellId 25385 02:34:39.548106 tst switch_tch_pdch.py: using BVCI 25386 02:34:39.572612 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:34:39.584392 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:34:39.595870 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:34:39.607418 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:34:39.618931 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:34:39.630570 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:34:39.642217 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x ip_address (candidates: 8) 02:34:39.653642 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 02:34:39.771698 tst dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any: Using 1 x modem (candidates: 2) 02:34:40.045632 tst switch_tch_pdch.py:51: start network... 02:34:40.169930 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:34:40.641148 run create_hlr_db(pid=14278): Launched 02:34:40.813603 bus /gobi_6: Setting Powered False 02:34:41.834006 run create_hlr_db(pid=14278): Terminated: ok {rc=0} 02:34:42.259127 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14280): Launched 02:34:42.578895 run osmo-hlr_10.42.42.2(pid=14281): Launched 02:34:42.698506 run osmo-stp_10.42.42.5: Starting osmo-stp 02:34:43.255438 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14283): Launched 02:34:43.575157 run osmo-stp_10.42.42.5(pid=14284): Launched 02:34:43.692083 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:34:44.250613 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14286): Launched 02:34:44.364929 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:34:44.644614 run patchelf(pid=14287): Launched 02:34:44.832240 run osmo-stp_10.42.42.5(pid=14284): ERR: Terminated: ERROR {rc=1} [trial-2368↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14284)] 02:34:44.969415 run osmo-stp_10.42.42.5(pid=14284): stdout: | (launched: 2022-12-10_02:34:43.417965) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:34:45.106425 run osmo-stp_10.42.42.5(pid=14284): stderr: | �[0;m�[38;5;43m20221210023443609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023443609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023443610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023443610 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023443611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023443611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023443611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:34:45.238702 run osmo-stp_10.42.42.5(pid=14284): stdout: | (launched: 2022-12-10_02:34:43.417965) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:34:45.370054 run osmo-stp_10.42.42.5(pid=14284): stderr: | �[0;m�[38;5;43m20221210023443609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210023443609 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210023443610 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210023443610 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210023443611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210023443611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210023443611 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:34:45.522882 run patchelf(pid=14287): Terminating (SIGINT) 02:34:45.702710 run patchelf(pid=14287): Terminated: ok {rc=0} 02:34:45.735299 tst switch_tch_pdch.py:54: ERR: Error: osmo-stp_10.42.42.5(pid=14284): Process ended prematurely: osmo-stp_10.42.42.5(pid=14284) [trial-2368↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14284)] [trial-2368↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54] 02:34:45.744328 tst switch_tch_pdch.py:54: Test FAILED (6.7 sec) 02:34:45.807716 run osmo-hlr_10.42.42.2(pid=14281): ERR: Terminated: ERROR {rc=237} [trial-2368↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py↪switch_tch_pdch.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=14281)] 02:34:45.873269 run osmo-hlr_10.42.42.2(pid=14281): stdout: | (launched: 2022-12-10_02:34:42.421266) 02:34:45.935099 run osmo-hlr_10.42.42.2(pid=14281): stderr: | �[0;m�[1;31m20221210023442620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210023442620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210023442620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210023442620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210023442620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210023442620 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210023442632 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any/switch_tch_pdch.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210023442642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210023442642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210023442642 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:34:45.981898 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14280): Terminating (SIGTERM) 02:34:46.025955 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14283): Terminating (SIGTERM) 02:34:46.073860 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14286): Terminating (SIGTERM) 02:34:46.084649 --- ParallelTerminationStrategy: PID 14280 died... 02:34:46.142379 run pcap-recorder_any(filters='host 10.42.42.2')(pid=14280): Terminated: ok {rc=0} 02:34:46.153042 --- ParallelTerminationStrategy: PID 14283 died... 02:34:46.210091 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=14283): Terminated: ok {rc=0} 02:34:46.220811 --- ParallelTerminationStrategy: PID 14286 died... 02:34:46.278060 run pcap-recorder_any(filters='host 10.42.42.6')(pid=14286): Terminated: ok {rc=0} 02:34:46.368443 bus /gobi_0: Setting Powered False 02:34:47.472270 bus /gobi_0: Setting Powered False 02:34:48.584507 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/dynts/switch_tch_pdch.py", line 54, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=14284): Process ended prematurely: osmo-stp_10.42.42.5(pid=14284) [trial-2368↪dynts:trx-b200+mod-bts0-dynts67-ipa+cfg-codec-fr-any↪switch_tch_pdch.py:54↪switch_tch_pdch.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=14284)]