Failed
gprs:nanobts+band-1900.cs_paging_gprs_active.py (from gprs_nanobts+band-1900)
Stacktrace
osmo-stp_10.42.42.5(pid=18203): Process ended prematurely: osmo-stp_10.42.42.5(pid=18203) [trial-2368↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18203)]
Standard Output
---------------------------------------------- trial-2368 gprs:nanobts+band-1900 cs_paging_gprs_active.py ---------------------------------------------- 03:10:42.402764 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:42.413338 tst gprs:nanobts+band-1900: Using 1 x bts (candidates: 1) 03:10:42.543653 tst cs_paging_gprs_active.py: using LAC 25578 03:10:42.665135 tst cs_paging_gprs_active.py: using RAC 78 03:10:42.780776 tst cs_paging_gprs_active.py: using CellId 25578 03:10:42.899610 tst cs_paging_gprs_active.py: using BVCI 25579 03:10:42.922680 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:42.933309 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:42.943585 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:42.954312 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:42.964847 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:42.975466 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:42.986330 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:42.996743 tst gprs:nanobts+band-1900: Using 1 x ip_address (candidates: 9) 03:10:43.007415 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 03:10:43.126658 tst gprs:nanobts+band-1900: Using 1 x modem (candidates: 4) 03:10:43.419275 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 03:10:43.553466 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:10:43.886218 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18193): Launched 03:10:44.163792 run iperf3-srv_10.42.42.10(pid=18194): Launched 03:10:44.360339 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 03:10:44.494728 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:10:44.827405 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18195): Launched 03:10:45.105505 run iperf3-srv_10.42.42.10(pid=18196): Launched 03:10:45.302632 tst cs_paging_gprs_active.py:38: start network... 03:10:45.437123 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:10:45.992890 run create_hlr_db(pid=18197): Launched 03:10:46.217327 bus /sierra_2: Setting Powered False 03:10:47.242783 run create_hlr_db(pid=18197): Terminated: ok {rc=0} 03:10:47.674346 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18199): Launched 03:10:47.997097 run osmo-hlr_10.42.42.2(pid=18200): Launched 03:10:48.115873 run osmo-stp_10.42.42.5: Starting osmo-stp 03:10:48.676334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18202): Launched 03:10:48.999822 run osmo-stp_10.42.42.5(pid=18203): Launched 03:10:49.117305 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:10:49.681337 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18205): Launched 03:10:49.796605 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:10:50.078892 run patchelf(pid=18206): Launched 03:10:50.267870 run osmo-stp_10.42.42.5(pid=18203): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18203)] 03:10:50.405807 run osmo-stp_10.42.42.5(pid=18203): stdout: | (launched: 2022-12-10_03:10:48.840553) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:10:50.543502 run osmo-stp_10.42.42.5(pid=18203): stderr: | �[0;m�[38;5;43m20221210031049032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031049033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031049033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031049033 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031049034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031049034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031049034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:10:50.677227 run osmo-stp_10.42.42.5(pid=18203): stdout: | (launched: 2022-12-10_03:10:48.840553) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:10:50.809373 run osmo-stp_10.42.42.5(pid=18203): stderr: | �[0;m�[38;5;43m20221210031049032 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031049033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031049033 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031049033 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031049034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031049034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031049034 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:10:50.963662 run patchelf(pid=18206): Terminating (SIGINT) 03:10:51.144520 run patchelf(pid=18206): Terminated: ok {rc=0} 03:10:51.177580 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=18203): Process ended prematurely: osmo-stp_10.42.42.5(pid=18203) [trial-2368↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18203)] [trial-2368↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38] 03:10:51.187229 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 03:10:51.249694 run osmo-hlr_10.42.42.2(pid=18200): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18200)] 03:10:51.300793 run osmo-hlr_10.42.42.2(pid=18200): stdout: | (launched: 2022-12-10_03:10:47.838422) 03:10:51.352590 run osmo-hlr_10.42.42.2(pid=18200): stderr: | �[0;m�[1;31m20221210031048036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210031048036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210031048036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210031048036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210031048036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210031048036 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210031048049 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-1900/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210031048057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210031048057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210031048057 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:10:51.396554 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18193): Terminating (SIGTERM) 03:10:51.438256 run iperf3-srv_10.42.42.10(pid=18194): Terminating (SIGTERM) 03:10:51.479915 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18195): Terminating (SIGTERM) 03:10:51.521579 run iperf3-srv_10.42.42.10(pid=18196): Terminating (SIGTERM) 03:10:51.563349 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18199): Terminating (SIGTERM) 03:10:51.604921 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18202): Terminating (SIGTERM) 03:10:51.646682 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18205): Terminating (SIGTERM) 03:10:51.656384 --- ParallelTerminationStrategy: PID 18193 died... 03:10:51.713167 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18193): Terminated: ok {rc=0} 03:10:51.723377 --- ParallelTerminationStrategy: PID 18194 died... 03:10:51.778522 run iperf3-srv_10.42.42.10(pid=18194): Terminated {rc=256} 03:10:51.788443 --- ParallelTerminationStrategy: PID 18195 died... 03:10:51.843713 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18195): Terminated: ok {rc=0} 03:10:51.853694 --- ParallelTerminationStrategy: PID 18196 died... 03:10:51.909657 run iperf3-srv_10.42.42.10(pid=18196): Terminated {rc=256} 03:10:51.919690 --- ParallelTerminationStrategy: PID 18199 died... 03:10:51.975196 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18199): Terminated: ok {rc=0} 03:10:51.985162 --- ParallelTerminationStrategy: PID 18202 died... 03:10:52.040940 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18202): Terminated: ok {rc=0} 03:10:52.051152 --- ParallelTerminationStrategy: PID 18205 died... 03:10:52.107068 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18205): Terminated: ok {rc=0} 03:10:52.195167 bus /gobi_0: Setting Powered False 03:10:53.302903 bus /gobi_0: Setting Powered False 03:10:54.411884 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18203): Process ended prematurely: osmo-stp_10.42.42.5(pid=18203) [trial-2368↪gprs:nanobts+band-1900↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18203)]