Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=18881): Process ended prematurely: osmo-stp_10.42.42.5(pid=18881) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18881)]
Standard Output
---------------------------------------------- trial-2368 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3.py ---------------------------------------------- 03:20:06.104597 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.117171 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 03:20:06.262306 tst iperf3.py: using LAC 25627 03:20:06.388224 tst iperf3.py: using RAC 127 03:20:06.516630 tst iperf3.py: using CellId 25627 03:20:06.643234 tst iperf3.py: using BVCI 25628 03:20:06.667848 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.679678 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.691348 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.703152 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.714766 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.726338 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.738088 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.749647 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:06.761480 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:07.053661 tst iperf3.py:8: start iperfv3 server 10.42.42.10:5003... 03:20:07.187194 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:07.519163 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18873): Launched 03:20:07.794318 run iperf3-srv_10.42.42.10(pid=18874): Launched 03:20:07.990183 tst iperf3.py:8: start network... 03:20:08.124083 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:20:08.639125 run create_hlr_db(pid=18875): Launched 03:20:08.824052 bus /gobi_6: Setting Powered False 03:20:09.845936 run create_hlr_db(pid=18875): Terminated: ok {rc=0} 03:20:10.274162 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18877): Launched 03:20:10.594759 run osmo-hlr_10.42.42.2(pid=18878): Launched 03:20:10.714468 run osmo-stp_10.42.42.5: Starting osmo-stp 03:20:11.273386 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18880): Launched 03:20:11.594826 run osmo-stp_10.42.42.5(pid=18881): Launched 03:20:11.711111 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:20:12.271407 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18883): Launched 03:20:12.393424 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:20:12.684414 run patchelf(pid=18898): Launched 03:20:12.868736 run osmo-stp_10.42.42.5(pid=18881): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18881)] 03:20:13.002060 run osmo-stp_10.42.42.5(pid=18881): stdout: | (launched: 2022-12-10_03:20:11.436552) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:13.136317 run osmo-stp_10.42.42.5(pid=18881): stderr: | �[0;m�[38;5;43m20221210032011628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210032011628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210032011628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210032011629 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210032011629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210032011629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210032011629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:13.267871 run osmo-stp_10.42.42.5(pid=18881): stdout: | (launched: 2022-12-10_03:20:11.436552) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:13.398405 run osmo-stp_10.42.42.5(pid=18881): stderr: | �[0;m�[38;5;43m20221210032011628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210032011628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210032011628 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210032011629 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210032011629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210032011629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210032011629 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:13.549910 run patchelf(pid=18898): Terminating (SIGINT) 03:20:13.727118 run patchelf(pid=18898): Terminated: ok {rc=0} 03:20:13.760603 tst iperf3.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=18881): Process ended prematurely: osmo-stp_10.42.42.5(pid=18881) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18881)] [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8] 03:20:13.771171 tst iperf3.py:8: Test FAILED (7.7 sec) 03:20:13.837791 run osmo-hlr_10.42.42.2(pid=18878): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py↪iperf3.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18878)] 03:20:13.890062 run osmo-hlr_10.42.42.2(pid=18878): stdout: | (launched: 2022-12-10_03:20:10.437464) 03:20:13.942985 run osmo-hlr_10.42.42.2(pid=18878): stderr: | �[0;m�[1;31m20221210032010636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210032010636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210032010636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210032010636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210032010636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210032010636 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210032010649 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210032010657 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210032010658 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210032010658 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:20:13.987883 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18873): Terminating (SIGTERM) 03:20:14.034609 run iperf3-srv_10.42.42.10(pid=18874): Terminating (SIGTERM) 03:20:14.079410 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18877): Terminating (SIGTERM) 03:20:14.124217 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18880): Terminating (SIGTERM) 03:20:14.169012 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18883): Terminating (SIGTERM) 03:20:14.179552 --- ParallelTerminationStrategy: PID 18873 died... 03:20:14.239190 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=18873): Terminated: ok {rc=0} 03:20:14.249718 --- ParallelTerminationStrategy: PID 18874 died... 03:20:14.306221 run iperf3-srv_10.42.42.10(pid=18874): Terminated {rc=256} 03:20:14.316714 --- ParallelTerminationStrategy: PID 18877 died... 03:20:14.371905 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18877): Terminated: ok {rc=0} 03:20:14.381738 --- ParallelTerminationStrategy: PID 18880 died... 03:20:14.436720 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18880): Terminated: ok {rc=0} 03:20:14.446409 --- ParallelTerminationStrategy: PID 18883 died... 03:20:14.501530 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18883): Terminated: ok {rc=0} 03:20:14.588655 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3.py", line 8, in <module> setup_run_iperf3_test_parallel(1) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18881): Process ended prematurely: osmo-stp_10.42.42.5(pid=18881) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3.py:8↪iperf3.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18881)]