Failed
gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend.iperf3m4.py (from gprs_nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend)
Stacktrace
osmo-stp_10.42.42.5(pid=19427): Process ended prematurely: osmo-stp_10.42.42.5(pid=19427) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19427)]
Standard Output
---------------------------------------------- trial-2368 gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend iperf3m4.py ---------------------------------------------- 03:20:15.702261 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:15.714389 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x bts (candidates: 1) 03:20:15.863923 tst iperf3m4.py: using LAC 25628 03:20:15.988856 tst iperf3m4.py: using RAC 128 03:20:16.118135 tst iperf3m4.py: using CellId 25628 03:20:16.266114 tst iperf3m4.py: using BVCI 25629 03:20:16.298548 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:16.313189 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:16.327370 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:16.340733 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:16.353365 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:16.365415 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:16.377974 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:16.390021 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x ip_address (candidates: 9) 03:20:16.402690 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:16.547488 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:16.699406 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:16.855965 tst gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend: Using 1 x modem (candidates: 4) 03:20:17.153553 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5003... 03:20:17.281227 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:17.596598 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19236): Launched 03:20:17.855553 run iperf3-srv_10.42.42.10(pid=19237): Launched 03:20:18.038322 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5004... 03:20:18.163739 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:18.475045 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19238): Launched 03:20:18.733672 run iperf3-srv_10.42.42.10(pid=19239): Launched 03:20:18.916052 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5005... 03:20:19.040678 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:19.350647 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19240): Launched 03:20:19.609343 run iperf3-srv_10.42.42.10(pid=19241): Launched 03:20:19.792533 tst iperf3m4.py:8: start iperfv3 server 10.42.42.10:5006... 03:20:19.918031 run iperf3-srv_10.42.42.10: Starting iperf3-srv 03:20:20.246908 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19242): Launched 03:20:20.523135 run iperf3-srv_10.42.42.10(pid=19243): Launched 03:20:20.720096 tst iperf3m4.py:8: start network... 03:20:20.854161 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:20:21.368402 run create_hlr_db(pid=19244): Launched 03:20:21.552676 bus /gobi_6: Setting Powered False 03:20:22.575380 run create_hlr_db(pid=19244): Terminated: ok {rc=0} 03:20:23.002414 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19259): Launched 03:20:23.330771 run osmo-hlr_10.42.42.2(pid=19339): Launched 03:20:23.543392 run osmo-stp_10.42.42.5: Starting osmo-stp 03:20:24.171061 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19426): Launched 03:20:24.583719 run osmo-stp_10.42.42.5(pid=19427): Launched 03:20:24.821523 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:20:25.440053 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19429): Launched 03:20:25.550146 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:20:25.841592 run patchelf(pid=19430): Launched 03:20:26.022876 run osmo-stp_10.42.42.5(pid=19427): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19427)] 03:20:26.154906 run osmo-stp_10.42.42.5(pid=19427): stdout: | (launched: 2022-12-10_03:20:24.327442) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:26.288427 run osmo-stp_10.42.42.5(pid=19427): stderr: | �[0;m�[38;5;43m20221210032024668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210032024668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210032024668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210032024668 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210032024669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210032024669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210032024669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:26.418136 run osmo-stp_10.42.42.5(pid=19427): stdout: | (launched: 2022-12-10_03:20:24.327442) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:20:26.544850 run osmo-stp_10.42.42.5(pid=19427): stderr: | �[0;m�[38;5;43m20221210032024668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210032024668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210032024668 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210032024668 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210032024669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210032024669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210032024669 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:20:26.694542 run patchelf(pid=19430): Terminating (SIGINT) 03:20:26.867975 run patchelf(pid=19430): Terminated: ok {rc=0} 03:20:26.900327 tst iperf3m4.py:8: ERR: Error: osmo-stp_10.42.42.5(pid=19427): Process ended prematurely: osmo-stp_10.42.42.5(pid=19427) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19427)] [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8] 03:20:26.911030 tst iperf3m4.py:8: Test FAILED (11.2 sec) 03:20:26.976282 run osmo-hlr_10.42.42.2(pid=19339): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py↪iperf3m4.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=19339)] 03:20:27.028873 run osmo-hlr_10.42.42.2(pid=19339): stdout: | (launched: 2022-12-10_03:20:23.169179) 03:20:27.083970 run osmo-hlr_10.42.42.2(pid=19339): stderr: | �[0;m�[1;31m20221210032023498 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210032023498 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210032023498 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210032023498 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210032023498 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210032023498 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210032023519 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend/iperf3m4.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210032023527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210032023527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210032023527 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:20:27.127508 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19236): Terminating (SIGTERM) 03:20:27.171859 run iperf3-srv_10.42.42.10(pid=19237): Terminating (SIGTERM) 03:20:27.218881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19238): Terminating (SIGTERM) 03:20:27.263090 run iperf3-srv_10.42.42.10(pid=19239): Terminating (SIGTERM) 03:20:27.306785 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19240): Terminating (SIGTERM) 03:20:27.348931 run iperf3-srv_10.42.42.10(pid=19241): Terminating (SIGTERM) 03:20:27.391968 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19242): Terminating (SIGTERM) 03:20:27.436441 run iperf3-srv_10.42.42.10(pid=19243): Terminating (SIGTERM) 03:20:27.480558 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19259): Terminating (SIGTERM) 03:20:27.525786 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19426): Terminating (SIGTERM) 03:20:27.568569 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19429): Terminating (SIGTERM) 03:20:27.581392 --- ParallelTerminationStrategy: PID 19236 died... 03:20:27.640563 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19236): Terminated: ok {rc=0} 03:20:27.651058 --- ParallelTerminationStrategy: PID 19237 died... 03:20:27.707981 run iperf3-srv_10.42.42.10(pid=19237): Terminated {rc=256} 03:20:27.718443 --- ParallelTerminationStrategy: PID 19238 died... 03:20:27.773927 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19238): Terminated: ok {rc=0} 03:20:27.785413 --- ParallelTerminationStrategy: PID 19239 died... 03:20:27.841829 run iperf3-srv_10.42.42.10(pid=19239): Terminated {rc=256} 03:20:27.853370 --- ParallelTerminationStrategy: PID 19240 died... 03:20:27.910162 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19240): Terminated: ok {rc=0} 03:20:27.920717 --- ParallelTerminationStrategy: PID 19241 died... 03:20:27.978661 run iperf3-srv_10.42.42.10(pid=19241): Terminated {rc=256} 03:20:27.989405 --- ParallelTerminationStrategy: PID 19242 died... 03:20:28.047881 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=19242): Terminated: ok {rc=0} 03:20:28.058741 --- ParallelTerminationStrategy: PID 19243 died... 03:20:28.115696 run iperf3-srv_10.42.42.10(pid=19243): Terminated {rc=256} 03:20:28.126403 --- ParallelTerminationStrategy: PID 19259 died... 03:20:28.183471 run pcap-recorder_any(filters='host 10.42.42.2')(pid=19259): Terminated: ok {rc=0} 03:20:28.194210 --- ParallelTerminationStrategy: PID 19426 died... 03:20:28.253374 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=19426): Terminated: ok {rc=0} 03:20:28.264073 --- ParallelTerminationStrategy: PID 19429 died... 03:20:28.321503 run pcap-recorder_any(filters='host 10.42.42.6')(pid=19429): Terminated: ok {rc=0} 03:20:28.409153 bus /gobi_4: Setting Powered False 03:20:29.511978 bus /gobi_4: Setting Powered False 03:20:30.618732 bus /gobi_1: Setting Powered False 03:20:31.724389 bus /gobi_1: Setting Powered False 03:20:32.830612 bus /gobi_0: Setting Powered False 03:20:33.936809 bus /gobi_0: Setting Powered False 03:20:35.048725 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/iperf3m4.py", line 8, in <module> setup_run_iperf3_test_parallel(4) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=19427): Process ended prematurely: osmo-stp_10.42.42.5(pid=19427) [trial-2368↪gprs:nanobts+band-900+mod-bts0-numtrx2+mod-bts0-chanallocdescend↪iperf3m4.py:8↪iperf3m4.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=19427)]