Failed
gprs:nanobts+band-900.ping_idle_ping.py (from gprs_nanobts+band-900)
Stacktrace
osmo-stp_10.42.42.5(pid=18694): Process ended prematurely: osmo-stp_10.42.42.5(pid=18694) [trial-2368↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18694)]
Standard Output
---------------------------------------------- trial-2368 gprs:nanobts+band-900 ping_idle_ping.py ---------------------------------------------- 03:17:42.992748 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 03:17:43.005043 tst gprs:nanobts+band-900: Using 1 x bts (candidates: 1) 03:17:43.149656 tst ping_idle_ping.py: using LAC 25615 03:17:43.276790 tst ping_idle_ping.py: using RAC 115 03:17:43.407263 tst ping_idle_ping.py: using CellId 25615 03:17:43.534497 tst ping_idle_ping.py: using BVCI 25616 03:17:43.558991 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 03:17:43.570223 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 03:17:43.581244 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 03:17:43.592349 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 03:17:43.603428 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 03:17:43.614546 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 03:17:43.625875 tst gprs:nanobts+band-900: Using 1 x ip_address (candidates: 9) 03:17:43.637050 tst gprs:nanobts+band-900: Using 1 x modem (candidates: 4) 03:17:43.912378 tst ping_idle_ping.py:24: start network... 03:17:44.037050 run osmo-hlr_10.42.42.2: Starting osmo-hlr 03:17:44.525949 run create_hlr_db(pid=18685): Launched 03:17:44.711686 bus /gobi_6: Setting Powered False 03:17:45.732156 run create_hlr_db(pid=18685): Terminated: ok {rc=0} 03:17:46.212885 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18687): Launched 03:17:46.638826 run osmo-hlr_10.42.42.2(pid=18688): Launched 03:17:46.773900 run osmo-stp_10.42.42.5: Starting osmo-stp 03:17:47.463383 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18692): Launched 03:17:47.780311 run osmo-stp_10.42.42.5(pid=18694): Launched 03:17:47.889155 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 03:17:48.452899 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18696): Launched 03:17:48.567169 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 03:17:48.848929 run patchelf(pid=18697): Launched 03:17:49.035941 run osmo-stp_10.42.42.5(pid=18694): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18694)] 03:17:49.165153 run osmo-stp_10.42.42.5(pid=18694): stdout: | (launched: 2022-12-10_03:17:47.626145) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:17:49.294227 run osmo-stp_10.42.42.5(pid=18694): stderr: | �[0;m�[38;5;43m20221210031747800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031747800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031747800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031747801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031747801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031747801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031747801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:17:49.417642 run osmo-stp_10.42.42.5(pid=18694): stdout: | (launched: 2022-12-10_03:17:47.626145) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 03:17:49.541280 run osmo-stp_10.42.42.5(pid=18694): stderr: | �[0;m�[38;5;43m20221210031747800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210031747800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210031747800 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210031747801 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210031747801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210031747801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210031747801 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 03:17:49.685240 run patchelf(pid=18697): Terminating (SIGINT) 03:17:49.854401 run patchelf(pid=18697): Terminated: ok {rc=0} 03:17:49.885331 tst ping_idle_ping.py:27: ERR: Error: osmo-stp_10.42.42.5(pid=18694): Process ended prematurely: osmo-stp_10.42.42.5(pid=18694) [trial-2368↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18694)] [trial-2368↪gprs:nanobts+band-900↪ping_idle_ping.py:27] 03:17:49.893932 tst ping_idle_ping.py:27: Test FAILED (6.9 sec) 03:17:49.955145 run osmo-hlr_10.42.42.2(pid=18688): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:nanobts+band-900↪ping_idle_ping.py↪ping_idle_ping.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=18688)] 03:17:50.005108 run osmo-hlr_10.42.42.2(pid=18688): stdout: | (launched: 2022-12-10_03:17:46.382727) 03:17:50.055503 run osmo-hlr_10.42.42.2(pid=18688): stderr: | �[0;m�[1;31m20221210031746742 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210031746742 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210031746742 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210031746742 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210031746743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210031746743 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210031746766 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:nanobts+band-900/ping_idle_ping.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210031746783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210031746783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210031746783 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 03:17:50.098118 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18687): Terminating (SIGTERM) 03:17:50.139755 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18692): Terminating (SIGTERM) 03:17:50.179792 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18696): Terminating (SIGTERM) 03:17:50.189404 --- ParallelTerminationStrategy: PID 18687 died... 03:17:50.242614 run pcap-recorder_any(filters='host 10.42.42.2')(pid=18687): Terminated: ok {rc=0} 03:17:50.252531 --- ParallelTerminationStrategy: PID 18692 died... 03:17:50.305970 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=18692): Terminated: ok {rc=0} 03:17:50.315624 --- ParallelTerminationStrategy: PID 18696 died... 03:17:50.369076 run pcap-recorder_any(filters='host 10.42.42.6')(pid=18696): Terminated: ok {rc=0} 03:17:50.453355 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/ping_idle_ping.py", line 27, in <module> ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=18694): Process ended prematurely: osmo-stp_10.42.42.5(pid=18694) [trial-2368↪gprs:nanobts+band-900↪ping_idle_ping.py:27↪ping_idle_ping.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=18694)]