Failed
gprs:oc2g+mod-bts0-egprs.cs_paging_gprs_active.py (from gprs_oc2g+mod-bts0-egprs)
Stacktrace
osmo-stp_10.42.42.5(pid=13135): Process ended prematurely: osmo-stp_10.42.42.5(pid=13135) [trial-2368↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13135)]
Standard Output
---------------------------------------------- trial-2368 gprs:oc2g+mod-bts0-egprs cs_paging_gprs_active.py ---------------------------------------------- 02:22:02.247113 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.258249 tst gprs:oc2g+mod-bts0-egprs: Using 1 x bts (candidates: 1) 02:22:02.386421 tst cs_paging_gprs_active.py: using LAC 25319 02:22:02.505543 tst cs_paging_gprs_active.py: using RAC 74 02:22:02.628467 tst cs_paging_gprs_active.py: using CellId 25319 02:22:02.747230 tst cs_paging_gprs_active.py: using BVCI 25320 02:22:02.770531 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.781328 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.791916 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.803173 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.813909 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.824594 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.835698 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.846457 tst gprs:oc2g+mod-bts0-egprs: Using 1 x ip_address (candidates: 9) 02:22:02.857335 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:22:02.977505 tst gprs:oc2g+mod-bts0-egprs: Using 1 x modem (candidates: 4) 02:22:03.270258 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:22:03.404941 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:22:03.736520 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13125): Launched 02:22:04.012131 run iperf3-srv_10.42.42.10(pid=13126): Launched 02:22:04.208344 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:22:04.342073 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:22:04.674556 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13127): Launched 02:22:04.950496 run iperf3-srv_10.42.42.10(pid=13128): Launched 02:22:05.146014 tst cs_paging_gprs_active.py:38: start network... 02:22:05.279418 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:22:05.795146 run create_hlr_db(pid=13129): Launched 02:22:05.980395 bus /gobi_6: Setting Powered False 02:22:07.001275 run create_hlr_db(pid=13129): Terminated: ok {rc=0} 02:22:07.406224 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13131): Launched 02:22:07.708052 run osmo-hlr_10.42.42.2(pid=13132): Launched 02:22:07.817899 run osmo-stp_10.42.42.5: Starting osmo-stp 02:22:08.339386 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13134): Launched 02:22:08.642902 run osmo-stp_10.42.42.5(pid=13135): Launched 02:22:08.753479 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:22:09.277669 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13137): Launched 02:22:09.385459 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:22:09.648176 run patchelf(pid=13138): Launched 02:22:09.824298 run osmo-stp_10.42.42.5(pid=13135): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13135)] 02:22:09.953219 run osmo-stp_10.42.42.5(pid=13135): stdout: | (launched: 2022-12-10_02:22:08.493737) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:22:10.082160 run osmo-stp_10.42.42.5(pid=13135): stderr: | �[0;m�[38;5;43m20221210022208665 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210022208665 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210022208666 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210022208666 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210022208666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210022208667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210022208667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:22:10.207322 run osmo-stp_10.42.42.5(pid=13135): stdout: | (launched: 2022-12-10_02:22:08.493737) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:22:10.331092 run osmo-stp_10.42.42.5(pid=13135): stderr: | �[0;m�[38;5;43m20221210022208665 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210022208665 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210022208666 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210022208666 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210022208666 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210022208667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210022208667 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:22:10.475523 run patchelf(pid=13138): Terminating (SIGINT) 02:22:10.645073 run patchelf(pid=13138): Terminated: ok {rc=0} 02:22:10.676032 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13135): Process ended prematurely: osmo-stp_10.42.42.5(pid=13135) [trial-2368↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13135)] [trial-2368↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38] 02:22:10.685186 tst cs_paging_gprs_active.py:38: Test FAILED (8.5 sec) 02:22:10.746253 run osmo-hlr_10.42.42.2(pid=13132): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13132)] 02:22:10.795678 run osmo-hlr_10.42.42.2(pid=13132): stdout: | (launched: 2022-12-10_02:22:07.559403) 02:22:10.846204 run osmo-hlr_10.42.42.2(pid=13132): stderr: | �[0;m�[1;31m20221210022207737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210022207737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210022207737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210022207737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210022207737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210022207737 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210022207750 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:oc2g+mod-bts0-egprs/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210022207760 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210022207761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210022207761 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:22:10.888551 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13125): Terminating (SIGTERM) 02:22:10.929022 run iperf3-srv_10.42.42.10(pid=13126): Terminating (SIGTERM) 02:22:10.969249 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13127): Terminating (SIGTERM) 02:22:11.009135 run iperf3-srv_10.42.42.10(pid=13128): Terminating (SIGTERM) 02:22:11.049588 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13131): Terminating (SIGTERM) 02:22:11.089531 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13134): Terminating (SIGTERM) 02:22:11.129621 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13137): Terminating (SIGTERM) 02:22:11.139234 --- ParallelTerminationStrategy: PID 13125 died... 02:22:11.192450 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13125): Terminated: ok {rc=0} 02:22:11.202212 --- ParallelTerminationStrategy: PID 13126 died... 02:22:11.255010 run iperf3-srv_10.42.42.10(pid=13126): Terminated {rc=256} 02:22:11.264405 --- ParallelTerminationStrategy: PID 13127 died... 02:22:11.317810 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13127): Terminated: ok {rc=0} 02:22:11.327348 --- ParallelTerminationStrategy: PID 13128 died... 02:22:11.380356 run iperf3-srv_10.42.42.10(pid=13128): Terminated {rc=256} 02:22:11.390068 --- ParallelTerminationStrategy: PID 13131 died... 02:22:11.443353 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13131): Terminated: ok {rc=0} 02:22:11.452915 --- ParallelTerminationStrategy: PID 13134 died... 02:22:11.506179 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13134): Terminated: ok {rc=0} 02:22:11.516007 --- ParallelTerminationStrategy: PID 13137 died... 02:22:11.569433 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13137): Terminated: ok {rc=0} 02:22:11.653609 bus /gobi_0: Setting Powered False 02:22:12.759812 bus /gobi_0: Setting Powered False 02:22:13.871438 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13135): Process ended prematurely: osmo-stp_10.42.42.5(pid=13135) [trial-2368↪gprs:oc2g+mod-bts0-egprs↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13135)]