Failed
gprs:oc2g.cs_paging_gprs_active.py (from gprs_oc2g)
Stacktrace
osmo-stp_10.42.42.5(pid=13068): Process ended prematurely: osmo-stp_10.42.42.5(pid=13068) [trial-2368↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13068)]
Standard Output
---------------------------------------------- trial-2368 gprs:oc2g cs_paging_gprs_active.py ---------------------------------------------- 02:21:02.370504 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.380822 tst gprs:oc2g: Using 1 x bts (candidates: 1) 02:21:02.504364 tst cs_paging_gprs_active.py: using LAC 25314 02:21:02.627276 tst cs_paging_gprs_active.py: using RAC 69 02:21:02.749307 tst cs_paging_gprs_active.py: using CellId 25314 02:21:02.872251 tst cs_paging_gprs_active.py: using BVCI 25315 02:21:02.895658 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.906182 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.916479 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.927030 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.937221 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.947801 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.958419 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.968845 tst gprs:oc2g: Using 1 x ip_address (candidates: 9) 02:21:02.979453 tst gprs:oc2g: Using 1 x modem (candidates: 4) 02:21:03.095086 tst gprs:oc2g: Using 1 x modem (candidates: 4) 02:21:03.392315 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5003... 02:21:03.530595 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:21:03.869753 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13058): Launched 02:21:04.153090 run iperf3-srv_10.42.42.10(pid=13059): Launched 02:21:04.354976 tst cs_paging_gprs_active.py:38: start iperfv3 server 10.42.42.10:5004... 02:21:04.492899 run iperf3-srv_10.42.42.10: Starting iperf3-srv 02:21:04.831404 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13060): Launched 02:21:05.114209 run iperf3-srv_10.42.42.10(pid=13061): Launched 02:21:05.315143 tst cs_paging_gprs_active.py:38: start network... 02:21:05.452836 run osmo-hlr_10.42.42.2: Starting osmo-hlr 02:21:05.979024 run create_hlr_db(pid=13062): Launched 02:21:06.168101 bus /sierra_2: Setting Powered False 02:21:07.188700 run create_hlr_db(pid=13062): Terminated: ok {rc=0} 02:21:07.623353 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13064): Launched 02:21:07.951643 run osmo-hlr_10.42.42.2(pid=13065): Launched 02:21:08.070908 run osmo-stp_10.42.42.5: Starting osmo-stp 02:21:08.638334 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13067): Launched 02:21:08.966386 run osmo-stp_10.42.42.5(pid=13068): Launched 02:21:09.085326 run osmo-ggsn_10.42.42.6: Starting osmo-ggsn 02:21:09.655263 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13070): Launched 02:21:09.772092 run osmo-ggsn_10.42.42.6: Setting RPATH for osmo-ggsn 02:21:10.057608 run patchelf(pid=13071): Launched 02:21:10.248623 run osmo-stp_10.42.42.5(pid=13068): ERR: Terminated: ERROR {rc=1} [trial-2368↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13068)] 02:21:10.387916 run osmo-stp_10.42.42.5(pid=13068): stdout: | (launched: 2022-12-10_02:21:08.804679) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:21:10.527781 run osmo-stp_10.42.42.5(pid=13068): stderr: | �[0;m�[38;5;43m20221210022108997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210022108997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210022108997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210022108998 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210022108998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210022108998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210022108998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:21:10.663116 run osmo-stp_10.42.42.5(pid=13068): stdout: | (launched: 2022-12-10_02:21:08.804679) | Copyright (C) 2015-2020 by Harald Welte <laforge@gnumonks.org> | Contributions by Holger Freyther, Neels Hofmeyr, Pau Espin, Vadim Yanitskiy | License GPLv2+: GNU GPL Version 2 or later <http://gnu.org/licenses/gpl-2.0.html> | This is free software: you are free to change and redistribute it. | There is NO WARRANTY, to the extent permitted by law. | | Free Software lives by contribution. If you use this, please contribute! | 02:21:10.797493 run osmo-stp_10.42.42.5(pid=13068): stderr: | �[0;m�[38;5;43m20221210022108997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Creating m3ua Server (null):2905 (osmo_ss7.c:2189) | �[0;m�[38;5;43m20221210022108997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m Created m3ua server on (null):2905 (osmo_ss7.c:2207) | �[0;m�[38;5;43m20221210022108997 �[1;32mDLSS7�[0;m�[38;5;43m �[1;32mINFO�[0;m�[38;5;43m (Re)binding m3ua Server to 10.42.42.5:2905 (osmo_ss7.c:2235) | �[0;m20221210022108998 �[1;33mDLGLOBAL�[0;m �[1;33mNOTICE�[0;m unable to bind socket: 10.42.42.5:2905: Address already in use (socket.c:822) | % Unable to bind xUA server to IP(s) | 20221210022108998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.5:4239: Address already in use (socket.c:935) | 20221210022108998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.5:4239 (socket.c:946) | 20221210022108998 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.5 4239 (telnet_interface.c:99) | Error binding VTY port | : Address already in use 02:21:10.953558 run patchelf(pid=13071): Terminating (SIGINT) 02:21:11.137773 run patchelf(pid=13071): Terminated: ok {rc=0} 02:21:11.171420 tst cs_paging_gprs_active.py:38: ERR: Error: osmo-stp_10.42.42.5(pid=13068): Process ended prematurely: osmo-stp_10.42.42.5(pid=13068) [trial-2368↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13068)] [trial-2368↪gprs:oc2g↪cs_paging_gprs_active.py:38] 02:21:11.180908 tst cs_paging_gprs_active.py:38: Test FAILED (8.8 sec) 02:21:11.244340 run osmo-hlr_10.42.42.2(pid=13065): ERR: Terminated: ERROR {rc=237} [trial-2368↪gprs:oc2g↪cs_paging_gprs_active.py↪cs_paging_gprs_active.py↪osmo-hlr_10.42.42.2↪osmo-hlr_10.42.42.2(pid=13065)] 02:21:11.295498 run osmo-hlr_10.42.42.2(pid=13065): stdout: | (launched: 2022-12-10_02:21:07.791006) 02:21:11.347415 run osmo-hlr_10.42.42.2(pid=13065): stderr: | �[0;m�[1;31m20221210022107991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SECURE_DELETE' (db.c:579) | �[0;m�[1;31m20221210022107991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'SOUNDEX' (db.c:579) | �[0;m�[1;31m20221210022107991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'TEMP_STORE=1' (db.c:579) | �[0;m�[1;31m20221210022107991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'THREADSAFE=1' (db.c:579) | �[0;m�[1;31m20221210022107991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m SQLite3 compiled with 'USE_URI' (db.c:579) | �[0;m�[1;31m20221210022107991 �[1;34mDDB�[0;m�[1;31m �[1;34mDEBUG�[0;m�[1;31m Not setting SQL log callback: SQLite3 compiled without support for it (db.c:596) | �[0;m�[1;31m20221210022108004 �[1;33mDDB�[0;m�[1;31m �[1;33mNOTICE�[0;m�[1;31m Database '/home/jenkins/workspace/osmo-gsm-tester_run-prod/trial-2368/run.2022-12-10_02-07-09/gprs:oc2g/cs_paging_gprs_active.py/osmo-hlr_10.42.42.2/hlr.db' has HLR DB schema version 6 (db.c:636) | �[0;m20221210022108013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m unable to bind socket:10.42.42.2:4258: Address already in use (socket.c:935) | 20221210022108013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m no suitable addr found for: 10.42.42.2:4258 (socket.c:946) | 20221210022108013 �[1;31mDLGLOBAL�[0;m �[1;31mERROR�[0;m Cannot bind telnet at 10.42.42.2 4258 (telnet_interface.c:99) 02:21:11.391649 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13058): Terminating (SIGTERM) 02:21:11.433670 run iperf3-srv_10.42.42.10(pid=13059): Terminating (SIGTERM) 02:21:11.475324 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13060): Terminating (SIGTERM) 02:21:11.516994 run iperf3-srv_10.42.42.10(pid=13061): Terminating (SIGTERM) 02:21:11.558682 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13064): Terminating (SIGTERM) 02:21:11.601150 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13067): Terminating (SIGTERM) 02:21:11.642912 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13070): Terminating (SIGTERM) 02:21:11.652643 --- ParallelTerminationStrategy: PID 13058 died... 02:21:11.708279 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13058): Terminated: ok {rc=0} 02:21:11.718525 --- ParallelTerminationStrategy: PID 13059 died... 02:21:11.773710 run iperf3-srv_10.42.42.10(pid=13059): Terminated {rc=256} 02:21:11.783659 --- ParallelTerminationStrategy: PID 13060 died... 02:21:11.838859 run pcap-recorder_any(filters='host 10.42.42.10 and port not 22')(pid=13060): Terminated: ok {rc=0} 02:21:11.848918 --- ParallelTerminationStrategy: PID 13061 died... 02:21:11.904109 run iperf3-srv_10.42.42.10(pid=13061): Terminated {rc=256} 02:21:11.914244 --- ParallelTerminationStrategy: PID 13064 died... 02:21:11.969444 run pcap-recorder_any(filters='host 10.42.42.2')(pid=13064): Terminated: ok {rc=0} 02:21:11.979550 --- ParallelTerminationStrategy: PID 13067 died... 02:21:12.035278 run pcap-recorder_any(filters='host 10.42.42.5 and port not 22')(pid=13067): Terminated: ok {rc=0} 02:21:12.045598 --- ParallelTerminationStrategy: PID 13070 died... 02:21:12.100782 run pcap-recorder_any(filters='host 10.42.42.6')(pid=13070): Terminated: ok {rc=0} 02:21:12.186453 bus /gobi_0: Setting Powered False 02:21:13.293035 bus /gobi_0: Setting Powered False 02:21:14.400084 bus /gobi_6: Setting Powered False
Standard Error
Traceback (most recent call last): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/test.py", line 76, in run self.path) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 414, in run_python_file spec.loader.exec_module( importlib.util.module_from_spec(spec) ) File "<frozen importlib._bootstrap_external>", line 728, in exec_module File "<frozen importlib._bootstrap>", line 219, in _call_with_frames_removed File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/cs_paging_gprs_active.py", line 38, in <module> setup_run_iperf3_test_parallel(2, ready_cb=ready_cb_place_voicecall) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/sysmocom/suites/gprs/lib/testlib.py", line 67, in setup_run_iperf3_test_parallel ggsn.start() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/obj/ggsn_osmo.py", line 57, in start util.change_elf_rpath(binary, util.prepend_library_path(lib), self.run_dir.new_dir('patchelf')) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/util.py", line 57, in change_elf_rpath proc.launch_sync() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 214, in launch_sync raise e File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 211, in launch_sync self.wait() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/process.py", line 421, in wait MainLoop.wait(self.terminated, timeout=timeout) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 108, in wait if not self.wait_no_raise(condition, condition_args, condition_kwargs, timeout, timestep): File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 98, in wait_no_raise self.poll(may_block=True) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 86, in poll self.deferred_handling.handle_queue() File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/core/event_loop.py", line 33, in handle_queue handler(*args, **kwargs) File "/home/jenkins/workspace/osmo-gsm-tester_run-prod/osmo-gsm-tester/src/osmo_gsm_tester/testenv.py", line 142, in poll raise log_module.Error('Process ended prematurely: %s' % proc.name()) osmo_gsm_tester.core.log.Error: osmo-stp_10.42.42.5(pid=13068): Process ended prematurely: osmo-stp_10.42.42.5(pid=13068) [trial-2368↪gprs:oc2g↪cs_paging_gprs_active.py:38↪cs_paging_gprs_active.py↪osmo-stp_10.42.42.5↪osmo-stp_10.42.42.5(pid=13068)]